Vexpress ca15_tc2 is failing with 3.1.0 because of QEMU issue.
When this patch is applied
https://patchwork.kernel.org/patch/10754401/
Vexpress can be also turn to newer QEMU version.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

This change enables setting up specific Qemu version or sha1 for new
targets which are added after (current) v3.0.0 version.
This changes is preparation step for adding new Xilinx Versal Virt
platform which was merge after v3.0.0.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

The single job for all Layerscape 10xx platforms is close to, and
sometimes exceeds the time limit for a single job configuration.  Break
this down into jobs for LS101x, LS104x and LS108x instead.  While in
here, in the name portion of these jobs, refer to them as NXP for ARM
and not Freescale as they've been NXP for quite some time.
Signed-off-by: NTom Rini <trini@konsulko.com>

am43xx_evm_ethboot_defconfig is not being actively used and has not been
moved to DM or DT. Also, ethboot cannot be tested on AM43xx EVM as such
due EVM limitations. Therefore delete it.
Signed-off-by: NVignesh R <vigneshr@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

These defconfigs don't seem be actively used any more, and have not been
moved to adapt DM or DT. Therefore delete them.
Signed-off-by: NVignesh R <vigneshr@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Enable DM_SPI and DM_SPI_FLASH for actively used defconfigs for
am335x_evm.
Signed-off-by: NVignesh R <vigneshr@ti.com>

bananapi r2 can be booted from sd-card and emmc
saving the environment have to choose the storage
from which the device has booted

also the offset is set to 1MB to make sure env is written
to block "user data area" between uboot and first partition

https://www.fw-web.de/dokuwiki/lib/exe/fetch.php?cache=&media=bpi-r2:boot-structure.pngSigned-off-by: NFrank Wunderlich <frank-w@public-files.de>

The last parameter is expected to be the imagefile.  Since -E is a
flag having the output name before -p will make mkimage ignore the
external offset option.
Signed-off-by: NPatrick Wildt <patrick@blueri.se>

Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NAnatolij Gustschin <agust@denx.de>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NChris Packham <judge.packham@gmail.com>

Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NChris Packham <judge.packham@gmail.com>

Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NChris Packham <judge.packham@gmail.com>

Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Make system_guid const.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Pin count in APQ8016 was wrong, fix that.

Fixes: ad97051b ("mach-snapdragon: Introduce pinctrl driver")
Signed-off-by: NRamon Fried <ramon.fried@gmail.com>

Signed-off-by: NRamon Fried <ramon.fried@gmail.com>

- MIPS: mscc: various enhancements for Luton and Ocelot platforms
- MIPS: mscc: added support for Jaguar2 platform
- MIPS: optimised SPL linker script
- MIPS: bcm6368: fix restart flow issues
- MIPS: fixed CONFIG_OF_EMBED warnings for all MIPS boards
- MIPS: mt7688: small fixes and enhancements
- mmc: compile-out write support if disabled

- Fixes for CVE-2018-18440 and CVE-2018-18439
- Patch to allow disabling unneeded NAND ECC layouts
- Optimize SPI flash env read process

This fixes  'arch_lmb_reserve()' for ARM that tries to detect in which
DRAM bank 'sp' is in.

This code failed if a bank was at the end of physical address range
(i.e. size + length overflowed to 0).

To fix this, calculate 'bank_end' as 'size + length - 1' so that such
banks end at 0xffffffff, not 0.

Fixes: 15751403 ("ARM: bootm: don't assume sp is in DRAM bank 0")
Reported-by: NFrank Wunderlich <frank-w@public-files.de>
Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

This fixes CVE-2018-18439 ("insufficient boundary checks in network
image boot") by using lmb to check for a valid range to store
received blocks.
Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
[trini: Always build lib/lmb.o on LMB and lib/fdtdec.o on OF_LIBFDT]
Signed-off-by: NTom Rini <trini@konsulko.com>

lmb.h includes an extern declaration of "struct lmb lmb;" which
is not used anywhere, so remove it.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>

This reduces duplicate code only.
Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This fixes CVE-2018-18440 ("insufficient boundary checks in filesystem
image load") by using lmb to check the load size of a file against
reserved memory addresses.
Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This adds two new functions, lmb_alloc_addr and
lmb_get_unreserved_size.

lmb_alloc_addr behaves like lmb_alloc, but it tries to allocate a
pre-specified address range. Unlike lmb_reserve, this address range
must be inside one of the memory ranges that has been set up with
lmb_add.

lmb_get_unreserved_size returns the number of bytes that can be
used up to the next reserved region or the end of valid ram. This
can be 0 if the address passed is reserved.

Added test for these new functions.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>

boot_fdt_add_mem_rsv_regions() adds reserved memory sections to an lmb
struct. Currently, it only parses regions described by /memreserve/
entries.

Extend this to the more commonly used scheme of the "reserved-memory"
node.
Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

lmb_add_region handles overlapping regions wrong: instead of merging
or rejecting to add a new reserved region that overlaps an existing
one, it just adds the new region.

Since internally the same function is used for lmb_alloc, change
lmb_add_region to reject overlapping regions.

Also, to keep reserved memory correct after 'free', reserved entries
created by allocating memory must not set their size to a multiple
of alignment but to the original size. This ensures the reserved
region is completely removed when the caller calls 'lmb_free', as
this one takes the same size as passed to 'lmb_alloc' etc.

Add test to assert this.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>

The lmb code fails if base + size of RAM overflows to zero.

Fix this by calculating end as 'base + size - 1' instead of 'base + size'
where appropriate.

Added tests to assert this is fixed.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>

Add basic tests for the lmb memory allocation code used to reserve and
allocate memory during boot.
Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

The spi_flash_read_env function is a wrapper over spi_flash_read, which
enables the env to read multiple flash page size from flash until '\0\0'
is read or the end of env partition is reached. Instead of reading the
entire env size. When it reads '\0\0', it stops reading further the env
and assumes that the rest of env is '\0'.

This is an optimization for large environments that contain few bytes
environment variables. In this case it doesn't need to read the entire
environment and only few pages.
Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>

Each ECC layout consumes about 2984 bytes in the .data section. Allow
to disable the default ECC layouts if a driver is known to provide its
own ECC layout.
Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
Reviewed-by: NLukasz Majewski <lukma@denx.de>
Reviewed-by: NMiquel Raynal <miquel.raynal@bootlin.com>

Set the correct power-up state (default-state) of the green power LED.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

With the new SPI NOR framework in v4.19, we need to adapt the MTD parts
so that the kernel cmdline parameter "mtdparts=" uses the correct naming
for the devices.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs.

Based on https://patchwork.ozlabs.org/patch/1019791/Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>

Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs.
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>

Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs.
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>