- 27 7月, 2018 2 次提交
-
-
由 Chris Packham 提交于
Add driver model support to the mvgbe driver. As a temporary measure both DM and non-DM uses are supported. Once all the users have been converted the non-DM support can be dropped. Signed-off-by: NChris Packham <judge.packham@gmail.com> Tested-by: NMichael Walle <michael@walle.cc> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 14 6月, 2018 1 次提交
-
-
由 Kunihiko Hayashi 提交于
Add driver for Socionext AVE ethernet controller that includes MAC and MDIO bus supporting RGMII/RMII modes. The driver behaves the ethernet driver model (DM_ETH) with devicetree. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 17 5月, 2018 1 次提交
-
-
由 Chris Packham 提交于
When Kconfig support was added for MVGBE it included automatically selected PHYLIB support. But MVGBE does not need PHYLIB it will build fine without it. Commit ed52ea50 ("net: add Kconfig for MVGBE") should have been a no-op in terms of build size but because of the selecting PHYLIB the openrd configs increased in size. Remove the automatic selection of PHYLIB, boards that need it will have already enabled it in their config header file. Fixes: commit ed52ea50 ("net: add Kconfig for MVGBE") Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 15 5月, 2018 1 次提交
-
-
由 Chris Packham 提交于
Add Kconfig for MVGBE and update boards to select this. Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
- 14 4月, 2018 1 次提交
-
-
由 Peng Fan 提交于
On i.MX6SX, 6UL and 7D, there are two enet controllers each has a MDIO port. But Some boards share one MDIO port for the two enets. So introduce a configuration CONFIG_FEC_MXC_MDIO_BASE to indicate the MDIO port for sharing. In Kconfig, user needs enable CONFIG_FEC_MXC_SHARE_MDIO first to enter the CONFIG_FEC_MXC_MDIO_BASE. To i.MX28, adapt to use the new config Signed-off-by: NPeng Fan <peng.fan@nxp.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Fabio Estevam <fabio.estevam@nxp.com>
-
- 09 4月, 2018 2 次提交
-
-
由 Alex Kiernan 提交于
This converts CONFIG_DRIVER_TI_CPSW to Kconfig Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Mario Six 提交于
Migrate the CONFIG_TSEC_ENET option to Kconfig. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
- 07 4月, 2018 1 次提交
-
-
由 Christophe Leroy 提交于
CONFIG_8xx doesn't mean much outside of arch/powerpc/ This patch renames it CONFIG_MPC8xx just like CONFIG_MPC85xx etc ... It also renames 8xx_immap.h to immap_8xx.h to be consistent with other file names. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
- 23 3月, 2018 1 次提交
-
-
由 Calvin Johnson 提交于
Add configurations for PFE. Signed-off-by: NCalvin Johnson <calvin.johnson@nxp.com> Signed-off-by: NAnjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 16 1月, 2018 2 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
This adds SH_ETHER to drivers/net/Kconfig and convert to Kconfig. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Wilson Lee 提交于
Although Xilinx Zynq SoC was using MACB similar hardware. However, U-boot MACB driver was not supporting Xilinx Zynq SoC. This patch is to add support for the Xilinx Zynq SoC to the existing MACB network driver. This patch is to add Zynq GEM DMA Config, provide callback function for different linkspeed for case of using Xilinx Zynq Programmable Logic as GMII to RGMII converter. This patch convert the return value to use error codes. Signed-off-by: NWilson Lee <wilson.lee@ni.com> Cc: Chen Yee Chew <chen.yee.chew@ni.com> Cc: Keng Soon Cheah <keng.soon.cheah@ni.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 11 1月, 2018 1 次提交
-
-
由 Ahmed Mansour 提交于
The CONFIG_SYS_DPAA_QBMAN define is used by DPAA1 freescale SOCs to add device tree fixups that allow deep sleep in Linux. The define was placed in header files included by a number of boards, but was not explicitly documented in any of the Kconfigs. A description was added to the drivers/networking menuconfig and default selection for current SOCs that have this part Signed-off-by: NAhmed Mansour <ahmed.mansour@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 09 1月, 2018 1 次提交
-
-
由 Miquel Raynal 提交于
Until now, Armada 3700 SoCs could not enable the mvneta driver, and thus did not benefit from Ethernet support. Add ARMADA_3700 in the "depends on" list of the MVNETA Kconfig entry. Signed-off-by: NMiquel Raynal <miquel.raynal@free-electrons.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 07 12月, 2017 1 次提交
-
-
由 Stefan Mavrodiev 提交于
>From revision J the board uses new phy chip LAN8710. Compared with RTL8201, RA17 pin is TXERR. It has pullup which causes phy not to work. To fix this PA17 is muxed with GMAC function. This makes the pin output-low. Signed-off-by: NStefan Mavrodiev <stefan@olimex.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
- 09 11月, 2017 1 次提交
-
-
由 Artturi Alm 提交于
due misnaming of CONFIG_SUN4I_EMAC in include/configs/sunxi-common.h, likely missed in: commit 3146f0c0 ("Move PHYLIB to Kconfig") Signed-off-by: NArtturi Alm <artturi.alm@gmail.com> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
- 21 10月, 2017 1 次提交
-
-
由 Adam Ford 提交于
We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 26 9月, 2017 1 次提交
-
-
由 Chris Packham 提交于
This converts the following to Kconfig: CONFIG_MVNETA Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 08 8月, 2017 1 次提交
-
-
由 Suji Velupillai 提交于
move to Kconfig: CONFIG_BCM_SF2_ETH CONFIG_BCM_SF2_ETH_DEFAULT_PORT CONFIG_BCM_SF2_ETH_GMAC Also modified defconfigs of all platforms that use these configs. Signed-off-by: NSuji Velupillai <suji.velupillai@broadcom.com> Tested-by: NSuji Velupillai <suji.velupillai@broadcom.com> Reviewed-by: NJD Zheng <jiandong.zheng@broadcom.com> Reviewed-by: NScott Branden <scott.branden@broadcom.com> Signed-off-by: NSteve Rae <steve.rae@raedomain.com> Reviewed-by: NTom Rini <trini@konsulko.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 09 7月, 2017 1 次提交
-
-
由 Christophe Leroy 提交于
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
- 03 6月, 2017 1 次提交
-
-
由 Philipp Tomsich 提交于
This change migrate the following configuration options for Kconfig: * PHY_GIGE, indicates that a controller (with an appropriate PHY) is Gigabit capable and enables extra support in the miiutil for parsing the status of Gigabit PHYs * adds configuration options for Micrel KSZ9021 and KSZ9031 GbE PHYs, which previously had to enabled through a board-specific config file Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 23 5月, 2017 1 次提交
-
-
由 rick 提交于
Support Andestech eth ftmac100 device tree flow on AG101P/AE3XX platform. Verification: Boot linux kernel via dhcp and bootm ok. NDS32 # setenv bootm_size 0x2000000;setenv fdt_high 0x1f00000; NDS32 # dhcp 0x600000 10.0.4.97:boomimage-310y-ae300-spi.bin BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 DHCP client bound to address 10.0.4.178 (4899 ms) Using mac@e0100000 device TFTP from server 10.0.4.97; our IP address is 10.0.4.178 Filename 'boomimage-310y-ae300-spi.bin'. Load address: 0x600000 Loading: ################################################################# ################################################################# ################################################################# ... ... ################################### 233.4 KiB/s done Bytes transferred = 13872076 (d3abcc hex) NDS32 # dhcp 0x2000000 10.0.4.97:ae300.dtb BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 DHCP client bound to address 10.0.4.178 (4592 ms) Using mac@e0100000 device TFTP from server 10.0.4.97; our IP address is 10.0.4.178 Filename 'ae300.dtb'. Load address: 0x2000000 Loading: # 82 KiB/s done Bytes transferred = 2378 (94a hex) NDS32 # bootm 0x600000 - 0x2000000 Image Name: Created: 2017-03-22 6:52:03 UTC Image Type: NDS32 Linux Kernel Image (uncompressed) Data Size: 13872012 Bytes = 13.2 MiB Load Address: 0000c000 Entry Point: 0000c000 Verifying Checksum ... OK Booting using the fdt blob at 0x2000000 Loading Kernel Image ... OK Loading Device Tree to 01efc000, end 01eff949 ... OK Linux version 3.10.102-20375-gb0034c1-dirty (rick@app09) (gcc version 4.9.3 (2016-07-06_nds32le-linux-glibc-v3_experimental) ) #293 PREEMPT Wed Mar 22 14:49:28 CST 2017 CPU: NDS32 N13, AndesCore ID(wb), CPU_VER 0x0d11103f(id 13, rev 17, cfg 4159) ... ... Signed-off-by: Nrick <rick@andestech.com>
-
- 22 5月, 2017 1 次提交
-
-
由 Marek Vasut 提交于
Add driver for the Renesas Ethernet AVB block found in RCar H3/M3. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Tom Rini <trini@konsulko.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Based on work of: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Takeshi Kihara <takeshi.kihara.df@renesas.com> Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
-
- 20 4月, 2017 3 次提交
-
-
由 Mylène Josserand 提交于
Convert CONFIG_RGMII to Kconfig. Thanks to that, it is possible to update defconfig files of SYS_EXTRA_OPTIONS accordingly and remove it when it is possible. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Mylène Josserand 提交于
Convert the SUNXI_EMAC config to Kconfig. Remove it from SYS_EXTRA_OPTIONS from many sunxi defconfig and renamed it into SUN4I_EMAC to not confuse it with SUN8I_EMAC. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Mylène Josserand 提交于
Move the SUNXI_GMAC config option to Kconfig, remove it from SYS_EXTRA_OPTIONS and rename it into SUN7I_GMAC. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 29 3月, 2017 1 次提交
-
-
由 Stefan Roese 提交于
Since Armada 7K/8K is also equipped with a newer version of the MVPP2 ethernet controller, lets enable compilation of this driver for these platforms. Signed-off-by: NStefan Roese <sr@denx.de> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 28 2月, 2017 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 08 2月, 2017 2 次提交
-
-
由 Alex 提交于
Provide the necessary Kconfig symbols so that PHYLIB support may be enabled in Kconfig, as opposed to needing to #define these symbols in C source headers. BITBANGMII and MV88E6352_SWITCH are left out of the PHYLIB submenu as they don't seem to explicitly depend on it (i.e. they do not use the phy_driver class). Signed-off-by: NAlexandru Gagniuc <alex.g@adaptrum.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Wenyou Yang 提交于
Add CONFIG_MACB option in KConfig to be used to select the Cadence MACB Ethernet driver. Signed-off-by: NWenyou Yang <wenyou.yang@atmel.com>
-
- 12 1月, 2017 1 次提交
-
-
由 Sjoerd Simons 提交于
Add a new driver for the GMAC ethernet interface present in Rockchip RK3288 SOCs. This driver subclasses the generic design-ware driver to add the glue needed specifically for Rockchip. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NRomain Perier <romain.perier@collabora.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 16 12月, 2016 1 次提交
-
-
由 Patrick Bruenn 提交于
Add CX9020 board based on mx53loco. Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse serial_mxc with DTE and prepare for device tree migration of other functions and imx53 devices. The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - CCAT FPGA connected to emi - enable rtc Signed-off-by: NPatrick Bruenn <p.bruenn@beckhoff.com>
-
- 08 11月, 2016 1 次提交
-
-
由 Stephen Warren 提交于
This driver supports the Synopsys Designware Ethernet QoS (Quality of Service) a/k/a eqos IP block, which is a different design than the HW supported by the existing designware.c driver. The IP supports many options for bus type, clocking/reset structure, and feature list. This driver currently supports the specific configuration used in NVIDIA's Tegra186 chip, but should be extensible to other combinations quite easily, as explained in the source. Signed-off-by: NStephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> # V1 Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 26 10月, 2016 1 次提交
-
-
由 Jagan Teki 提交于
Added kconfig for FEC_MXC driver. Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
- 21 9月, 2016 1 次提交
-
-
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: NPaul Burton <paul.burton@imgtec.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 16 8月, 2016 1 次提交
-
-
由 Max Filippov 提交于
Add Kconfig entry for the driver, remove #define CONFIG_ETHOC from the only board configuration that uses it and put it into that board's defconfig. Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 15 7月, 2016 1 次提交
-
-
由 Amit Singh Tomar 提交于
This patch add EMAC driver support for H3/A83T/A64 SoCs. Tested on Pine64(A64-External PHY) and Orangepipc(H3-Internal PHY). BIG Thanks to Andre for providing some of the DT code. Signed-off-by: NAmit Singh Tomar <amittomer25@gmail.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
- 31 5月, 2016 1 次提交
-
-
由 Marek Vasut 提交于
Add ethernet driver for the AR933x and AR934x Atheros MIPS machines. The driver could be easily extended to other WiSoCs. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Wills Wang <wills.wang@live.com> [fixed Kconfig dependency] Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
- 04 4月, 2016 1 次提交
-
-
由 Stefan Roese 提交于
This patch adds support for the mvpp2 ethernet controller which is integrated in the Marvell Armada 375 SoC. This port is based on the Linux driver (v4.4), which has been stripped of the in U-Boot unused portions. Tested on the Marvell Armada 375 eval board db-88f6720. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Acked-by: NJoe Hershberger <joe.hershberger@gmail.com>
-
- 31 3月, 2016 1 次提交
-
-
由 Michael Haas 提交于
This patch introduces CONFIG_RTL8211X_PHY_FORCE_MASTER. If this define is set, RTL8211x PHYs (except for the RTL8211F) will have their 1000BASE-T master/slave autonegotiation disabled and forced to master mode. This is helpful for PHYs like the RTL8211C which produce unstable links in slave mode. Such problems have been found on the A20-Olimex-SOM-EVB and A20-OLinuXino-Lime2. There is no proper way to identify affected PHYs in software as the RTL8211C shares its UID with the RTL8211B. Thus, this fix requires the introduction of an #ifdef. CC: fradav@gmail.com CC: merker@debian.org CC: hdegoede@redhat.com CC: ijc@hellion.org.uk CC: joe.hershberger@ni.com Signed-off-by: NMichael Haas <haas@computerlinguist.org> Tested-by: NKarsten Merker <merker@debian.org> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-