- 16 12月, 2009 1 次提交
-
-
由 Peter Tyser 提交于
The gd->cpu pointer is set to an address located in flash when the probecpu() function is called while U-Boot is executing from flash. This pointer needs to be updated to point to an address in RAM after relocation has occurred otherwise Linux may not be able to boot due to "fdt board" crashing if flash has been erased or changed. This bug was introduced in commit a0e2066f. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Reported-by: NEd Swarthout <Ed.Swarthout@freescale.com> Tested-by: NKumar Gala <galak@kernel.crashing.org> Tested on MPC8527DS. Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>
-
- 15 12月, 2009 2 次提交
-
-
由 Peter Tyser 提交于
Neither the MVBLUE nor its underlying architecture implement the do_irqinfo() function which is required when CONFIG_CMD_IRQ is defined. This change fixes the following MVBLUE compiler error: -> ./MAKEALL MVBLUE Configuring for MVBLUE board... common/libcommon.a(cmd_irq.o):(.u_boot_cmd+0x24): undefined reference to `do_irqinfo' make: *** [u-boot] Error 1 Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Acked-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>
-
由 Detlev Zundel 提交于
The support for this was silently dropped by a configuration split during the merge of the imx27lite board support in commit 864aa034 (cmd_mtdparts: Move to common handling of FLASH devices via MTD layer). Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
- 12 12月, 2009 1 次提交
-
-
由 Stefan Roese 提交于
Currently, the last block of NAND devices can't be accessed. This patch fixes this issue by correcting the boundary checking (off-by-one error). Signed-off-by: NStefan Roese <sr@denx.de> Cc: Scott Wood <scottwood@freescale.com> Cc: Wolfgang Denk <wd@denx.de>
-
- 10 12月, 2009 1 次提交
-
-
由 Peter Korsgaard 提交于
Commit c7190f02 (retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields) moved the LCRR assignment to after relocation to RAM because of the potential problem with changing the local bus clock while executing from flash. This change unfortunately adversely affects the boot time, as running all code up to cpu_init_r can cause significant slowdown. E.G. on a 8347 board a bootup time increase of ~600ms has been observed: 0.020 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz 0.168 RS: 232 0.172 I2C: ready 0.176 DRAM: 64 MB 1.236 FLASH: 32 MB Versus: 0.016 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz 0.092 RS: 232 0.092 I2C: ready 0.096 DRAM: 64 MB 0.644 FLASH: 32 MB So far no boards have needed the late LCRR setup, so simply revert it for now - If it is needed at a later time, those boards can either do their own final LCRR setup in board code (E.G. in board_early_init_r), or we can introduce a CONFIG_SYS_LCRR_LATE config option to only do the setup in cpu_init_r. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 08 12月, 2009 17 次提交
-
-
由 Michal Simek 提交于
We are using generic implementation of ffs. This should be part of Simon's commit 0413cfec Here is warning message which this patch removes. In file included from /tmp/u-boot-microblaze/include/common.h:38, from cmd_mtdparts.c:87: /tmp/u-boot-microblaze/include/linux/bitops.h:123:1: warning: "ffs" redefined In file included from /tmp/u-boot-microblaze/include/linux/bitops.h:110, from /tmp/u-boot-microblaze/include/common.h:38, from cmd_mtdparts.c:87: /tmp/u-boot-microblaze/include/asm/bitops.h:269:1: warning: this is the location of the previous definition Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Graeme Smecher 提交于
A typo caused the stack and malloc regions to overlap, which prevented mem_malloc_init() from returning. This commit makes the memory layout match the example described in include/configs/microblaze-generic.h Signed-off-by: NGraeme Smecher <graeme.smecher@mail.mcgill.ca> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Peter Tyser 提交于
Previously MAKEALL would always return a value of 0, even if 1 or more boards did not compile. This change causes MAKEALL to return 0 if all boards were able to build, otherwise 1. This change also requires changing the script interpreter from sh to bash to support bash's PIPESTATUS variable. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
Recent commits 1a99de2c and 6a590c5f both fixed the same bug in the same manner. Unfortunately git was "smart" enough to merge both changes which resulted in some duplicate code. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Reordered code and comment a bit. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Heiko Schocher 提交于
commit bd3784df deleted some unused code in do_i2c_mw(), but missed to also remove the respective commment. This patch fixes this. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
To update the real memory size in the memory node on the uc101 and mucmc52 boards call fdt_fixup_memory() in ft_board_setup(). Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Daniel Hobi 提交于
Depending on offset, flash size and the number of bad blocks, get_len_incl_bad may return a too small value which may lead to: 1) If there are no bad blocks, nand_{read,write}_skip_bad chooses the bad block aware read/write code. This may hurt performance, but does not have any adverse effects. 2) If there are bad blocks, the nand_{read,write}_skip_bad may choose the bad block unaware read/write code (if len_incl_bad == *length) which leads to corrupted data. Signed-off-by: NDaniel Hobi <daniel.hobi@schmid-telecom.ch>
-
由 Evan Samanas 提交于
- NfsTimeout() does not correctly update the NFS timeout value which results in NfsTimeout() only being called once in certain situations. This can result in the 'nfs' command hanging indefinetly. For example, the command: nfs 192.168.0.1:/home/user/file will not exit until ctrl-c is pressed if 192.168.0.1 does not have an NFS server running. This issue is resolved by reinitializting the NFS timeout value inside NfsTimeout() when a timeout occurs. - Make the 'nfs' command print the 'T' character when a timeout occurs. Previously there was no indication that timeouts were occuring. - Mimic the 'tftpboot' command and when a download fails print "Retry count exceeded; starting again", and restart the download taking the 'netretry' environment variable into account. Signed-off-by: NEvan Samanas <esamanas@xes-inc.com> Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Tested on TQM8xxL. Tested by: Wolfgang Denk <wd@denx.de> Tested on MPC8527DS. Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>
-
由 Peter Tyser 提交于
The help message for the 'bootm' command listed the 'cmdline' and 'bdt' sub-commands in the wrong order which resulted in the error below when following the 'help' command's instructions: "Trying to execute a command out of order" Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Robert P. J. Day 提交于
"nandecc" help output should not reproduce the command name, nor have a trailing newline. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Mike Rapoport 提交于
Since commit 736fead8 "Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API" SMC911X configration options are called CONFIG_SMC911X rather than CONFIG_DRIVER_SMC911X. Update README to reflect that change. Signed-off-by: NMike Rapoport <mike@compulab.co.il>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
-
由 Ed Swarthout 提交于
An off by one error may cause nfs readlink lookup fail if nfs_path_buff has non-zero data from a previous use. Loading: *** ERROR: File lookup fail Signed-off-by: NEd Swarthout <Ed.Swarthout@freescale.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Commit dce3d797 updated the zlib code to v0.95; this caused conflicts when building for the "cradle" board, because the (pretty generic) preprocessor variable "OFF" was used in multiple files. Make sure to avoid further conflicts by #undef'ing it in zlib.c before redefining it. Signed-off-by: NWolfgang Denk <wd@denx.de> cc: Giuseppe Condorelli <giuseppe.condorelli@st.com> cc: Angelo Castello <angelo.castello@st.com> cc: Alessandro Rubini <rubini-list@gnudd.com>
-
- 06 12月, 2009 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 05 12月, 2009 6 次提交
-
-
由 Mike Frysinger 提交于
The Linux kernel build system changed how it compresses things with LZMA such that the header no longer contains the filesize (it is instead set to all F's). So if we get a LZMA image that has -1 for the 64bit field, let's just assume that the decompressed size is unknown and continue on. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Detlev Zundel 提交于
Two later additions to the Configuration Option section unfortunately split the description of Show boot progress and the list of its call outs. Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Peter Tyser 提交于
Previously, there was no indication to the user that a FIT image was successfully created after executing mkimage. For example: $ mkimage -f uImage.its uImage.itb DTC: dts->dtb on file "uImage.its" Adding some additional output after creating a FIT image lets the user know exactly what is contained in their image, eg: $ mkimage -f uImage.its uImage.itb DTC: dts->dtb on file "uImage.its" FIT description: Linux kernel 2.6.32-rc7-00201-g7550d6f-dirty Created: Tue Nov 24 15:43:01 2009 Image 0 (kernel@1) Description: Linux Kernel 2.6.32-rc7-00201-g7550d6f-dirty Type: Kernel Image Compression: gzip compressed Data Size: 2707311 Bytes = 2643.86 kB = 2.58 MB Architecture: PowerPC OS: Linux Load Address: 0x00000000 Entry Point: 0x00000000 Hash algo: crc32 Hash value: efe0798b Hash algo: sha1 Hash value: ecafba8c95684f2c8fec67e33c41ec88df1534d7 Image 1 (fdt@1) Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Size: 12288 Bytes = 12.00 kB = 0.01 MB Architecture: PowerPC Hash algo: crc32 Hash value: a5cab676 Hash algo: sha1 Hash value: 168722b13e305283cfd6603dfe8248cc329adea6 Default Configuration: 'config@1' Configuration 0 (config@1) Description: Default Linux kernel Kernel: kernel@1 FDT: fdt@1 This brings the behavior of creating a FIT image in line with creating a standard uImage, which also prints out the uImage contents after creation. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
The FIT fit_set_header() function was copied from the standard uImage's image_set_header() function during mkimage reorganization. However, the fit_set_header() function is not used since FIT images use a standard device tree blob header. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
When building a Flattened Image Tree (FIT) the image type needs to be "flat_dt". Commit 89a4d6b1 introduced a regression which caused the user to need to specify the "-T flat_dt" parameter on the command line when building a FIT image. The "-T flat_dt" parameter should not be needed and is at odds with the current FIT image documentation. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Michael Brandt 提交于
extfs.c assumes that there is always a valid inode_size field in the superblock. But this is not true for ext2fs rev 0. Such ext2fs images are for instance generated by genext2fs. Symptoms on ARM machines are messages like: "raise: Signal # 8 caught"; on PowerPC "ext2ls" will print nothing. This fix checks for rev 0 and uses then 128 bytes as inode size. Signed-off-by: NMichael Brandt <Michael.Brandt@emsyso.de> Tested on: TQM5200S Tested-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 03 12月, 2009 11 次提交
-
-
由 Robert P. J. Day 提交于
A small number of common/cmd_*.c files contain preprocessor tests that are apparently superfluous since those same tests are used in the Makefile to control the compilation of those files. Those tests are clearly redundant as long as they surround the entirety of the source in those files. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Robert P. J. Day 提交于
Bring the directory listing more into line with current content. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Pratap Chandu 提交于
There is some dead code enclosed by #if 0 .... #endif in the file common/cmd_i2c.c This patch removes the dead code. Signed-off-by: NPratap Chandu <pratap.rrke@gmail.com>
-
由 Mike Frysinger 提交于
Since the Makefile now controls the compilation of this, there is no need for CONFIG checking nor the stub function. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Magnus Lilja 提交于
Signed-off-by: NMagnus Lilja <lilja.magnus@gmail.com>
-
由 Magnus Lilja 提交于
Signed-off-by: NMagnus Lilja <lilja.magnus@gmail.com>
-
由 Peter Tyser 提交于
cmd_irq.c is a much better home and it is already conditionally compiled based on CONFIG_CMD_IRQ. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
cmd_license is already conditionally compiled at the Makefile-level. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
circbuf could be used as a generic library and is only currently needed when CONFIG_USB_TTY is defined. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Sanjeev Premi 提交于
Some versions of 'make' do not handle trailing white-spaces properly. Trailing spaces in ELF causes a 'fake' source to be added to the variable COBJS; leading to build failure (listed below). The problem was found with GNU Make 3.80. Using text-function 'strip' as a workaround for the problem. make[1]: Entering directory `/home/sanjeev/u-boot/examples/standalone' arm-none-linux-gnueabi-gcc -g -Os -fno-common -ffixed-r8 -msoft-float -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanjeev/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/codesourcery/2009q1- 203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/include -pipe -DCONFIG_ ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork -march=armv5 -Wall -Wstrict-prototypes -fno-stack-protector -g -Os -fno-common -ff ixed-r8 -msoft-float -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanje ev/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/co desourcery/2009q1-203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/includ e -pipe -DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-inte rwork -march=armv5 -I.. -Bstatic -T u-boot.lds -Ttext 0x80e80000 -o .c arm-none-linux-gnueabi-gcc: no input files make[1]: *** [.c] Error 1 make[1]: Leaving directory `/home/sanjeev/u-boot/examples/standalone' make: *** [examples/standalone] Error 2 premi # Signed-off-by: NSanjeev Premi <premi@ti.com> Fixed typo (s/ElF/ELF/). Signed-off-by: NWolfgang Denk <wd@denx.de>
-