- 14 4月, 2011 6 次提交
-
-
由 Mike Frysinger 提交于
Most arches don't support OSE, and this is a new bootm target, so the likelihood of any board actually wanting this today is fairly low. Any board who actually wants this can enable it in the board-specific config without making it a default bloat. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The Blackfin gpio command isn't terribly Blackfin-specific. So generalize the few pieces into two new optional helpers: name_to_gpio() - turn a string name into a GPIO # gpio_status() - display current pin bindings (think /proc/gpio) Once these pieces are pulled out, we can relocate the cmd_gpio.c into the common directory. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
There's no real need to keep these functions in the cmd_mem file since they do not use any of the common global mem variables. So split them out into their own dedicated cmd files. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 13 4月, 2011 11 次提交
-
-
由 Lei Wen 提交于
If the param pass to get_dev is not the one defined in the block_drvr, it could make uboot becomes unstable, for it would continue run after search complete the block_drvr table. Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Remy Bohmer 提交于
* The sector size for SPI-dataflash (like AT45 flashes) are not always a power-of-2. So, the sector calculations are rewritten such that it works for either power-of-2 as any size sectors. * Make the flash sector size optional in case it is the same value as the environment size. Signed-off-by: NRemy Bohmer <linux@bohmer.net>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Macpaul Lin 提交于
1. Move header to include/faraday 2. Fix include path in ftwdt010_wdt.c 3. Fix function prototype and declaration to - ftwdt010_wdt_settimeout - ftwdt010_wdt_reset - ftwdt010_wdt_disable 4. Add "#if definde (CONFIG_HW_WATCHDOG)" let user have flexibilty to choose which better to his product. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
由 Andreas Bießmann 提交于
This patch fixes following warning message: ---8<--- cmd_bdinfo.c:458: warning: initialization from incompatible pointer type --->8--- There was a prototype change in 54841ab5 for argv[] pointer type to const. This change was not made for AVR32 cause this code came in later by a merge. Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>
-
由 Andreas Bießmann 提交于
This patch fixes warnings in MAKEALL for avr32: ---8<--- cmd_nvedit.c: In function 'do_env_export': cmd_nvedit.c:663: warning: format '%zX' expects type 'size_t', but argument 3 has type 'ssize_t' --->8--- Signed-off-by: NAndreas Biemann <biessmann@corscience.de>
-
由 Wolfgang Denk 提交于
Rename STANDALONE_LOAD_ADDR into CONFIG_STANDALONE_LOAD_ADDR and allow that the architecture-specific default value gets overwritten by defining the value in the board header file. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Cc: Daniel Hellstrom <daniel@gaisler.com> Cc: Tsi Chung Liew <tsi-chung.liew@freescale.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Loïc Minier 提交于
"make tools-all" should allow building tools such as mkimage and the new imximage without any config, but imximage.c currently fails to build with: imximage.h:27:20: error: config.h: No such file or directory config.h is not needed in imximage.h nor in imximage.c, and imximage.h is only included from imximage.c, so drop this include to fix the build. Signed-off-by: NLoc Minier <loic.minier@linaro.org>
-
由 Loïc Minier 提交于
Signed-off-by: NLoc Minier <loic.minier@linaro.org>
-
由 Catalin Radu 提交于
Signed-off-by: NCatalin Radu <Catalin@VirtualMetrix.com>
-
由 Aaron Williams 提交于
There is a bug in the min and max macros in common.h which occurs if Y is a larger type than X. For example, if Y is a 64-bit value and X is a 32-bit value then Y will be truncated to 32-bits. This fix matches what is done in the Linux kernel but without the additional type checking present in the kernel version. Signed-off-by: NAaron Williams <aaron.williams@caviumnetworks.com>
-
- 12 4月, 2011 14 次提交
-
-
由 Macpaul Lin 提交于
Faraday ftwdt010 watchdog is an architecture independant watchdog. It is usually used in SoC chip design. Signed-off-by: NMacpaul Lin <macpaul@andestech.com> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Eric Bénard 提交于
this board was cancelled long time ago so remove it as it won't be maintained anymore Signed-off-by: NEric Bnard <eric@eukrea.com>
-
由 Andreas Huber 提交于
This reads the DIP switch on mgcoge. The DIP switch is connected to the BFTICU (0x40000089) FPGA. If the DIP switch is set the environment variable 'actual_bank' is set to 0 and starts the SW in bank0. Signed-off-by: NAndreas Huber <andreas.huber@keymile.com> Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
-
由 Holger Brunck 提交于
On first HW versions the BOCO FPGA was behind a MUX device. These HW versions are not supported anymore. And therefore this code can be removed, it is already unused. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
-
由 Roy Zang 提交于
Add Intel E1000 82574L PCIe card support. Test on MPC8544DS and MPC8572 board. Add the missing contact information for future support. Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Acked-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Joakim Tjernlund 提交于
-msingle-pic-base is a new gcc option for ppc and it reduces the size of my u-boot with 6-8 KB. While at it, add -fno-jump-tables too to save a few more bytes. -msingle-pic-base will be in gcc 4.6, however backported patches are available at http://bugs.gentoo.org/show_bug.cgi?id=347281Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
-
由 Joakim Tjernlund 提交于
The -fPIC flag belongs with -mrelocatable, move it there. Also change -fPIC to -fpic as this produces smaller binaries. However, currently -mrelocatable promotes -fpic to -fPIC, a fix for this is in upcoming gcc 4.6 or you can apply this small patch to gcc: diff --git a/gcc/config/rs6000/sysv4.h b/gcc/config/rs6000/sysv4.h index 8da8410..e4b8280 100644 --- a/gcc/config/rs6000/sysv4.h +++ b/gcc/config/rs6000/sysv4.h @@ -227,7 +227,8 @@ do { \ } \ \ else if (TARGET_RELOCATABLE) \ - flag_pic = 2; \ + if (!flag_pic) \ + flag_pic = 2; \ } while (0) #ifndef RS6000_BI_ARCH -- Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
-
由 Ben Gardiner 提交于
This patch fixes ea20 after 8ef583a0 where the u-boot custom PHY_ macros were replaced with those of linux/mii.h MII_ definitions except in the RMII support for davinci_emac. Probably also due to the merge path of changes in 2010.12. Signed-off-by: Ben Gardiner<bengardiner@nanometrics.ca> CC: Mike Frysinger <vapier@gentoo.org> Acked-by: NMike Frysinger <vapier@gentoo.org>
-
由 Ben Gardiner 提交于
This patch fixes ea20 after commit 6d8962e8 where $(obj)lib$(BOARD).a was changed to $(obj)lib$(BOARD).o in almost all the Makefiles except ea20, probably due to merge path of the changes in 2010.12. Signed-off-by: Ben Gardiner<bengardiner@nanometrics.ca> CC: Sebastien Carlier <sebastien.carlier@gmail.com> Acked-by : Stefano Babic <sbabic@denx.de>
-
由 Lei Wen 提交于
For uImage always has a 64 bytes header, we couldn't expect to do the xip from the header but should xip from the image start. The latter logic in that section is also move the image from image_start to the load address, so sync this logic to the xip operation. Signed-off-by: NLei Wen <leiwen@marvell.com> Acked-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
All of the spi flash drivers implement the status register polling for detecting the device ready state, so unify them all in a new helper function -- spi_flash_wait_ready. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
These functions largely do the same exact thing, so unify them all into one basic function. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 11 4月, 2011 9 次提交
-
-
-
-
-
由 Fabian Cenedese 提交于
Removed clearing of L2 cache as SRAM as it is not necessary without ECC. This also speeds up the booting process. Signed-off-by: NFabian Cenedese <cenedese@indel.ch> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Priyanka Jain 提交于
P1010 and P1014 has v2.3 version of FSL eSDHC controller in which watermark level register description has been changed: 9-15 bits represent WR_WML[0:6], Max value = 128 represented by 0x00 25-31 bits represent RD_WML[0:6], Max value = 128 represented by 0x00 Signed-off-by: NPriyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: NPoonam Aggrwal <Poonam.Aggrwal@freescale.com> Tested-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Shaohui Xie 提交于
PBL(pre-boot loader): SPI flash used as RCW(Reset Configuration Word) and PBI(pre-boot initialization) source, CPC(CoreNet Platform Cache) used as 1M SRAM where PBL will copy whole U-BOOT image to, U-boot can boot from CPC after PBL completes RCW and PBI phases. Signed-off-by: NChunhe Lan <b25806@freescale.com> Signed-off-by: NMingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: NShaohui Xie <b21989@freescale.com> Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jiang Yutang 提交于
Set default configuration to have SDHC controller enabled, AUDIO enabled(codec clock sources is 12MHz) and disable TDM. Signed-off-by: NJiang Yutang <b14898@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jiang Yutang 提交于
For soc which have pin multiplex relation, some of them can't enable simultaneously. This patch add environment var 'hwconfig' content defination for them. you can enable some one function by setting environment var 'hwconfig' content and reset board. Detail setting please refer doc/README.p1022ds Signed-off-by: NJiang Yutang <b14898@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jiang Yutang 提交于
Make the support for ATI graphics cards mutually exclusive with DIU. Signed-off-by: NJiang Yutang <b14898@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-