Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 08 4月, 2008 23 次提交
  3. 03 4月, 2008 1 次提交
  5. 02 4月, 2008 4 次提交
    • J
      MPC8xx: Fix libfdt support introduced in commit 77ff7b74 · c2a545ce
      由 Jean-Christophe PLAGNIOL-VILLARD 提交于 
      fdt.c: In function 'ft_cpu_setup':
fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
      c2a545ce
    • A
      Fix fdt set command to conform to dts spec · 4abd844d
      由 Andy Fleming 提交于 
      The fdt set command was treating properties specified as <00> and <0011>
as byte streams, rather than as an array of cells.  As we already have
syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
we should use the <> syntax to describe arrays of cells, which are always
32-bits per element.  If we imagine this likely (IMHO) scenario:

> fdt set /ethernet-phy@1 reg <1>

With the old code, this would create a bad fdt, since the reg cell would be
made to be one byte in length.  But the cell must be 4 bytes, so this would
break mysteriously.

Also, the dts spec calls for constants inside the angle brackets (<>)
to conform to C constant standards as they pertain to base.
Take this scenario:

> fdt set /ethernet@f00 reg <0xe250000\ 0x1000>

The old fdt command would complain that it couldn't parse that.  Or, if you
wanted to specify that a certain clock ran at 33 MHz, you'd be required to
do this:

> fdt set /mydev clock <1f78a40>

Whereas the new code will accept decimal numbers.

While I was in there, I extended the fdt command parser to handle property
strings which are split across multiple arguments:

> fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
> fdt p /ethernet@f00
ethernet@f00 {
	interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
};

Lastly, the fdt print code was rearranged slightly to print arrays of cells
if the length of the property is a multiple of 4 bytes, and to not print
leading zeros.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
      4abd844d
    • S
      ppc4xx: Canyonlands: Init SATA/PCIe port correctly · 1c2926ab
      由 Stefan Roese 提交于 
      Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
interface. This usage can be configured with the jumper J6. This patch
correctly configures the SATA/PCIe PHY for SATA usage when this jumper
is installed.
Signed-off-by: NStefan Roese <sr@denx.de>
      1c2926ab
    • K
      remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code · 6fe2946f
      由 Kim Phillips 提交于 
      finish off what commit 43ddd9c8,
"Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
started.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
      6fe2946f
  7. 01 4月, 2008 12 次提交