- 24 10月, 2016 1 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_LCD Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NJagan Teki <jteki@openedev.com>
-
- 12 10月, 2016 2 次提交
-
-
由 Lokesh Vutla 提交于
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 10 9月, 2016 1 次提交
-
-
由 Tom Rini 提交于
In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 26 4月, 2016 3 次提交
-
-
由 Tom Rini 提交于
Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 15 3月, 2016 2 次提交
-
-
由 Simon Glass 提交于
There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing boards. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 14 1月, 2016 1 次提交
-
-
由 Marco Schuster 提交于
This patch re-enables the setexpr command, I don't really understand why it got excluded in the first place. setexpr can be used e.g. to implement failed-boot-counters and failovers to rescue firmware. Signed-off-by: NMarco Schuster <m.schuster91@googlemail.com>
-
- 19 11月, 2015 1 次提交
-
-
由 Thomas Chou 提交于
Add CMD_GPIO to Kconfig and run tools/moveconfig.py . Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 28 9月, 2015 1 次提交
-
-
由 Bin Meng 提交于
Some boards' defconfigs are disordered. Reorder them. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
- 13 8月, 2015 1 次提交
-
-
由 Nikita Kiryanov 提交于
Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 26 6月, 2015 2 次提交
-
-
由 Joe Hershberger 提交于
This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Joe Hershberger 提交于
Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 6月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a83 (commands: add more command entries in Kconfig). Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 28 3月, 2015 3 次提交
-
-
由 Masahiro Yamada 提交于
BCM2835 (used on Raspberry Pi) and BCM2836 (used on Raspberry Pi 2) are similar enough. One of the biggest differences is the ARM processor. It is reasonable to collect the source files into a single place, arch/arm/mach-bcm283x/. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NStephen Warren <swarren@wwwdotorg.org>
-
由 Masahiro Yamada 提交于
This option has a bool type, not hex. Fix it and enable it if CONFIG_DM is on because Driver Model always requires malloc memory. Devices are scanned twice, before/after relocation. CONFIG_SYS_MALLOC_F should be enabled to use malloc memory before relocation. As it is board-independent, handle it globally. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NStephen Warren <swarren@wwwdotorg.org> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NRobert Baldyga <r.baldyga@samsung.com>
-
由 Masahiro Yamada 提交于
The default value of CONFIG_SYS_MALLOC_F_LEN is defined by ./Kconfig as 0x400. Each defconfig or Kconfig need not repeat the same value. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NStephen Warren <swarren@wwwdotorg.org> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NRobert Baldyga <r.baldyga@samsung.com>
-
- 13 2月, 2015 1 次提交
-
-
由 Simon Glass 提交于
Move this option to Kconfig and update all boards. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 08 12月, 2014 1 次提交
-
-
由 Stephen Warren 提交于
The U-Boot port runs on a variety of RPi models, not just the B. So, rename the port to something slightly more generic. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Reviewed-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-