- 12 5月, 2011 8 次提交
-
-
由 Clint Adams 提交于
Signed-off-by: NClint Adams <clint@debian.org> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Julian Pidancet <julian.pidancet@citrix.com>
-
由 Simon Guinot 提交于
The asm/arch/config.h header define CONFIG_NR_DRAM_BANKS_MAX, which is needed to configure DRAM banks. This patch move the asm/arch/config.h header inclusion above the DRAM banks configuration. Additionally this patch fix a typo. Signed-off-by: NSimon Guinot <sguinot@lacie.com>
-
由 Simon Guinot 提交于
This patch allow to override CONFIG_SYS_TCLK from board configuration files. This is needed for the Network Space v2 which use a non standard core clock frequency (166MHz instead of 200MHz for a 6281 SoC). As a possible enhancement for 6281 and 6282 devices, TCLK could be dynamically detected by checking the Sample at Reset register bit 21. Additionally this patch fix a typo. Signed-off-by: NSimon Guinot <sguinot@lacie.com> Acked-by: NPrafulla Wadaskar <Prafulla@marvell.com>
-
由 Stefano Babic 提交于
Drop warnings in get_cpu_rev and changes the return value (a u32 instead of char * is returned) of the function to be coherent with other processors. Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Detlev Zundel <dzu@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
-
由 Stefano Babic 提交于
Drop warning caused by missing prototype for mxc_hw_watchdog_reset(). Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Ben Gardiner 提交于
The current NAND timings, introduced in commit a3f88293 da850evm: setup the NAND flash timings , incorrectly set WSTROBE and TA to 0. A more recent inspection of the values set by the Linux kernel indicates that these should be set to 1. Set the WSTROBE and TA field of the EMIFA cycle-count timings configuration to 1 to match the values set by linux. Signed-off-by: NBen Gardiner <bengardiner@nanometrics.ca> CC: Stefano Babic <sbabic@denx.de> CC: Sandeep Paulraj <s-paulraj@ti.com> CC: Scott Wood <scottwood@freescale.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 11 5月, 2011 17 次提交
-
-
由 Valentin Longchamp 提交于
Collect all keymile specific common headers in include/configs/km. Signed-off-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Kim Phillips <kim.phillips@freescale.com> cc: Holger Brunck <holger.brunck@keymile.com>
-
由 Holger Brunck 提交于
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
-
由 Holger Brunck 提交于
Read out board id and HW key from the IVM eeprom and set these values as an environment variable. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Valentin Longchamp <valentin.longchamp@keymile.com>
-
由 Holger Brunck 提交于
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
-
由 Thomas Herzmann 提交于
The initial_boot_bank can be set when more than one application is used in a bootpackage. But a value n <> 0 never led to booting from bank n. Instead, bank 0 was booted. This patch fixes this. Signed-off-by: NThomas Herzmann <thomas.herzmann@keymile.com> Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
-
由 Holger Brunck 提交于
commit 91a3c14c (ppc, mgcoge: add DIP switch detection) introduces an compile error due to an missing define in the mgcoge2ne.h. DIP switch detection is valid for both boards. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> cc: Wolfgang Denk <wd@denx.de> cc: Heiko Schocher <hs@denx.de>
-
由 Holger Brunck 提交于
On mgcoge3ne a new environment variable bobcatreset is used. So this patch adds a possibility to add board specific environment variables in general and this specific variable for mgcoge3ne. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
-
由 Holger Brunck 提交于
Reserved bit was changed according to the processors manual. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
-
由 Holger Brunck 提交于
This patch adds support for the MPC8247 based board mgcoge3ne. Additionaly mgcoge2ne board supprot was removed, because due to the mgcoge3ne, this board is obsolete and not longer maintained. The board is similar to mgcoge. The difference is that a NUMONYX flash is used and a different SDRAM (256MB). Also introduce CONFIG_KM_82XX to collect ppc82xx common settings and remove staticness from the common set_pin function. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de>
-
由 Huber, Andreas 提交于
Introduce a struct for the BFTICU FPGA to increase the readability of the code. And the define CONFIG_SYS_BFTICU_BASE was removed because the CONFIG_SYS_FPGA_BASE is already the base value for BFTICU registers. Signed-off-by: NAndreas Huber <andreas.huber@keymile.com> Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de>
-
由 Holger Brunck 提交于
The directory and file mgcoge was renamed to km82xx. Because other keymile 82xx will follow and will use the same platform code. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
-
由 Holger Brunck 提交于
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
-
由 Holger Brunck 提交于
The hdlc implementation for mgcoge was initially developed, but later on not used. Remove the C files, the references in mgcoge.c and the Makefile to decrease maintenance effort. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
-
由 Heiko Schocher 提交于
cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
-
由 Heiko Schocher 提交于
do not define own flash_info variable, instead use the flash_info variable defined in your flash driver. Signed-off-by: NHeiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
-
-
-
- 09 5月, 2011 2 次提交
-
-
由 Shinya Kuribayashi 提交于
Current timer routines (arch/mips/lib/timer.c) are implemented assuming that MIPS32 coprocessor (CP0) resources, Counter and Compare registers in this case, are available. But this doesn't always work. We need to make sure that all MIPS-based systems don't necessarily use CP0 counter/compare registers as time keeping resources. And some MIPS variant processors might come with different hardware specs with genuine MIPS32 CP0 registers. With this change, each $(CPU)/ directory can have its own timer code. Signed-off-by: NShinya Kuribayashi <skuribay@pobox.com>
-
由 Daniel Schwierzeck 提交于
All architectures but MIPS are using --gc-sections on final linking. This patch introduces that feature for MIPS to reduce the memory and flash footprint. Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Thomas Lange <thomas@corelatus.se> Cc: Vlad Lungu <vlad.lungu@windriver.com> Signed-off-by: NShinya Kuribayashi <skuribay@pobox.com>
-
- 06 5月, 2011 2 次提交
-
-
由 Shinya Kuribayashi 提交于
Fix style issues and alignments globally. No logical changes. - Replace C comments with AS line comments where possible - Use ifndef where possible, rather than if !defined for simplicity - An instruction executed in a delay slot is now indicated by a leading space, not by C comment Signed-off-by: NShinya Kuribayashi <skuribay@pobox.com>
-
由 Shinya Kuribayashi 提交于
As requested in commit e1390801 ([MIPS] Request for the 'mips_cache_lock()' removal), such feature is no longer needed for current MIPS implementation of U-Boot, and no one in the tree uses it for years. Signed-off-by: NShinya Kuribayashi <skuribay@pobox.com>
-
- 01 5月, 2011 8 次提交
-
-
由 Wolfgang Denk 提交于
The changes introduced by commit 0abddf82 ``cmd_ide: enhance new feature "CONFIG_IDE_AHB"'' caused compiler warnings like cmd_ide.c: In function 'ide_init': cmd_ide.c:716: warning: assignment from incompatible pointer type Constify the respective function arguments to fix this. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Anatolij Gustschin 提交于
cmd_mdio.c: In function 'mdio_read_ranges': cmd_mdio.c:97: warning: comparison is always false due to limited range of data type Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Andy Fleming <afleming@freescale.com>
-
由 Anatolij Gustschin 提交于
Fix warning introduced while recent PHY Lib changes: miiphyutil.c: In function 'miiphy_read': miiphyutil.c:304: warning: comparison is always false due to limited range of data type Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Andy Fleming <afleming@freescale.com>
-
-
由 Macpaul Lin 提交于
Code clean up of cmd_nvedit.c by using checkpatch.pl. Signed-off-by: NMacpaul Lin <macpaul@andestech.com> Acked-by: NDetlev Zundel <dzu@denx.de>
-
由 Macpaul Lin 提交于
Although most IDE controller is designed to be connected to PCI bridge, there are still some IDE controller support AHB interface for SoC design. The driver implementation of these IDE-AHB controllers differ from other IDE-PCI controller, some additional registers and commands access is required during CMD/DATA I/O. Hence a configuration "CONFIG_IDE_AHB" in cmd_ide.c is required to be defined to support these kinds of SoC controllers. Such as Faraday's FTIDE020 series and Global Unichip's UINF-0301. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
由 Thomas Chou 提交于
This patch adds support for OpenCores tiny_spi. http://opencores.org/project,tiny_spiSigned-off-by: NThomas Chou <thomas@wytron.com.tw>
-
由 Mike Frysinger 提交于
While looking to upgrade to zlib-1.2.5, the current mondo merge of multiple files into a single was making things way more difficult than it should have been. Hard to pick out what has been changed to port it to U-Boot, been removed as useless, and bug fixes added after the fact. So split the single file up into the original file names, and merge non-essential changes back from the original tree (for some reason, style in code in a bunch of places was changed to U-Boot style even though this isn't "U-Boot" code). The original build style is retained -- we have a single zlib.c that includes all the other files, and that is the only file we compile. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 30 4月, 2011 3 次提交
-
-
由 Luca Ceresoli 提交于
Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it>
-
由 Scott Wood 提交于
Currently, some linker scripts are found by common code in config.mk. Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is sometimes in arch config.mk and sometimes in board config.mk. Some are found using an arch-specific rule for looking in CPUDIR, etc. Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds. Replace all of this -- except for a handful of boards that are actually selecting a linker script in a unique way -- with centralized ldscript finding. If board code specifies LDSCRIPT, that will be used. Otherwise, if CONFIG_SYS_LDSCRIPT is specified, that will be used. If neither of these are specified, then the central config.mk will check for the existence of the following, in order: $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds $(TOPDIR)/$(CPUDIR)/u-boot.lds Some boards (sc3, cm5200, munices) provided their own u-boot.lds that were dead code, because they were overridden by a CPUDIR u-boot.lds under the old powerpc rules. These boards' own u-boot.lds have bitrotted and no longer work -- these lds files have been removed. Signed-off-by: NScott Wood <scottwood@freescale.com> Tested-by: NGraeme Russ <graeme.russ@gmail.com>
-
由 Holger Brunck 提交于
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> cc: Wolfgang Denk <wd@denx.de> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de>
-