- 18 5月, 2018 4 次提交
-
-
由 Marek Vasut 提交于
This was never used, is not used anywhere and is just in the way by adding annoying ifdeffery. Get rid of it. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
-
由 Marek Vasut 提交于
The global data are in the .data section, so there's no point in reserving any space for it above stack. Put stack at the end of SRAM. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
-
由 Marek Vasut 提交于
The DT bindings for the Arria10 clock init have changed, add another compatible to make them work with U-Boot until a proper clock driver gets written. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
-
-
- 17 5月, 2018 13 次提交
-
-
由 Chris Packham 提交于
When Kconfig support was added for MVGBE it included automatically selected PHYLIB support. But MVGBE does not need PHYLIB it will build fine without it. Commit ed52ea50 ("net: add Kconfig for MVGBE") should have been a no-op in terms of build size but because of the selecting PHYLIB the openrd configs increased in size. Remove the automatic selection of PHYLIB, boards that need it will have already enabled it in their config header file. Fixes: commit ed52ea50 ("net: add Kconfig for MVGBE") Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Import the dts files from Linux 4.17 and enable device tree control in u-boot. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Import the dts file from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
These files are taken verbatim from the Linux kernel 4.17 Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
-
- 16 5月, 2018 12 次提交
-
-
由 Chris Packham 提交于
This was unintentionally disabled when moving MVGBE to Kconfig. Fixes: commit ed52ea50 ("net: add Kconfig for MVGBE") Signed-off-by: NChris Packham <judge.packham@gmail.com>
-
由 Kever Yang 提交于
Not all the udevice have a available DT node, eg. rksdmmc@ff500000.blk which add by mmc_bind(), these device do not have/need set pinctrl state. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Lothar Waßmann 提交于
When the U-Boot base directory happens to have the same name as the branch that buildman is directed to use via the '-b' option and no output directory is specified with '-o', buildman happily starts removing the whole U-Boot sources eventually only stopped with the error message: OSError: [Errno 20] Not a directory: '../<branch-name>/boards.cfg Add a check to avoid this and also deal with the case where '-o' points to the source directory, or any subdirectory of it. Finally, tidy up the confusing logic for removing the old tree when using -b. This is only done when building a branch. Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de> Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NLothar Waßmann <LW@KARO-electronics.de>
-
由 Bryan O'Donoghue 提交于
Compiling the f_mass_storage driver for an x86 target results in a compilation error as set_bit and clear_bit are provided by bitops.h To address that situation we discussed on the list moving to genetic_set_bit() instead. Doing a quick grep for similar situations in drivers/usb shows that the composite device is using __set_bit(). This patch switches over to generic_set_bit to maintain consistency between the two gadget drivers. Signed-off-by: NBryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de>
-
由 Bryan O'Donoghue 提交于
Compiling the f_mass_storage driver for an x86 target results in a compilation error as set_bit and clear_bit are provided by bitops.h Looking at the provenance of the current u-boot code and the git change history in the kernel, it looks like we have a local copy of set_bit and clear_bit as a hold-over from porting the Linux driver into u-boot. These days __set_bit and __clear_bit are optionally provided by an arch and can be used as inputs to generic_bit_set and generic_bit_clear. This patch switches over to generic_set_bit and generic_clear_bit to accommodate. Tested on i.MX WaRP7 and Intel Edison Signed-off-by: NBryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de>
-
由 Bryan O'Donoghue 提交于
nds2 bitops.h provides a __clear_bit() but does not define PLATFORM__CLEAR_BIT as a result generic_clear_bit() is used instead of the architecturally provided __clear_bit(). This patch defines PLATFORM__CLEAR_BIT which means that __clear_bit() in nds32 bitops.h will be called whenever generic_clear_bit() is called - as opposed to the default cross-platform generic_clear_bit(). Signed-off-by: NBryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Macpaul Lin <macpaul@andestech.com>
-
由 Bryan O'Donoghue 提交于
nds32 bitops.h provides a __set_bit() but does not define PLATFORM__SET_BIT as a result generic_set_bit() is used instead of the architecturally provided __set_bit(). This patch defines PLATFORM__SET_BIT which means that __set_bit() in nds32 bitops.h will be called whenever generic_set_bit() is called - as opposed to the default cross-platform generic_set_bit(). Signed-off-by: NBryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Macpaul Lin <macpaul@andestech.com>
-
由 Bryan O'Donoghue 提交于
nios2 bitops.h provides a __clear_bit() but does not define PLATFORM__CLEAR_BIT as a result generic_clear_bit() is used instead of the architecturally provided __clear_bit(). This patch defines PLATFORM__CLEAR_BIT which means that __clear_bit() in nios2 bitops.h will be called whenever generic_clear_bit() is called - as opposed to the default cross-platform generic_clear_bit(). Signed-off-by: NBryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Thomas Chou <thomas@wytron.com.tw>
-
由 Bryan O'Donoghue 提交于
nios2 bitops.h provides a __set_bit() but does not define PLATFORM__SET_BIT as a result generic_set_bit() is used instead of the architecturally provided __set_bit(). This patch defines PLATFORM__SET_BIT which means that __set_bit() in nios2 bitops.h will be called whenever generic_set_bit() is called - as opposed to the default cross-platform generic_set_bit(). Signed-off-by: NBryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Thomas Chou <thomas@wytron.com.tw>
-
由 Bryan O'Donoghue 提交于
riscv bitops.h provides a __clear_bit() but does not define PLATFORM__CLEAR_BIT as a result generic_clear_bit() is used instead of the architecturally provided __clear_bit(). This patch defines PLATFORM__CLEAR_BIT which means that __clear_bit() in riscv bitops.h will be called whenever generic_clear_bit() is called - as opposed to the default cross-platform generic_clear_bit(). Signed-off-by: NBryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Rick Chen <rick@andestech.com> Cc: Greentime Hu <green.hu@gmail.com>
-
由 Bryan O'Donoghue 提交于
riscv bitops.h provides a __set_bit() but does not define PLATFORM__SET_BIT as a result generic_set_bit() is used instead of the architecturally provided __set_bit(). This patch defines PLATFORM__SET_BIT which means that __set_bit() in x86 bitops.h will be called whenever generic_set_bit() is called - as opposed to the default cross-platform generic_set_bit(). Signed-off-by: NBryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Rick Chen <rick@andestech.com> Cc: Greentime Hu <green.hu@gmail.com>
-
由 Bryan O'Donoghue 提交于
x86 bitops.h provides a __set_bit() but does not define PLATFORM__SET_BIT as a result generic_set_bit() is used instead of the architecturally provided __set_bit(). This patch defines PLATFORM__SET_BIT which means that __set_bit() in x86 bitops.h will be called whenever generic_set_bit() is called - as opposed to the default cross-platform generic_set_bit(). Signed-off-by: NBryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com>
-
- 15 5月, 2018 11 次提交
-
-
由 Chris Packham 提交于
mv_ddr_build_message.c is generated in Marvell's standalone mv_ddr code. When imported into u-boot we need to add the appropriate SPDX tag and re-format it slightly. Signed-off-by: NChris Packham <judge.packham@gmail.com>
-
-
由 Vasily Khoruzhick 提交于
Add PWM definition to sun50i-a64.dtsi Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
-
由 Vasily Khoruzhick 提交于
This commit adds basic support for PWM found on Allwinner A64. It can be used for pwm_backlight driver (e.g. for Pinebook) Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
-
由 Vasily Khoruzhick 提交于
Currently dw_hdmi configures HSYNC polarity using VSYNC setting from EDID and vice versa. Fix it, since it breaks displays where HSYNC and VSYNC polarity differs Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: NJernej Skrabec <jernej.skrabec@siol.net>
-
由 Vasily Khoruzhick 提交于
HSYNC is bit 8, and VSYNC is bit 9. Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: NJernej Skrabec <jernej.skrabec@siol.net>
-
由 Ramon Fried 提交于
The check is necessary to avoid NULL pointer dereference. Signed-off-by: NRamon Fried <ramon.fried@gmail.com> Reviewed-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Chris Packham 提交于
Add Kconfig for MVGBE and update boards to select this. Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Nothing defines CONFIG_DOVE so remove the code that uses it. Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NStefan Roese <sr@denx.de> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Chris Packham 提交于
When the following configuration is set # CONFIG_CMD_DHCP is not set CONFIG_CMD_BOOTP=y CONFIG_BOOTP_NTPSERVER=y The following compile error is observed error: used struct type value where scalar is required if (net_ntp_server) ^~~~~~~~~~~~~~ Resolve this by checking net_ntp_server.s_addr instead. Signed-off-by: NChris Packham <judge.packham@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Chris Packham 提交于
Add a Kconfig option for BOOTP_NTPSERVER to enable the DHCP/BOOTP option to configure the sntp server address. Signed-off-by: NChris Packham <judge.packham@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-