The behavior of the env attrs depends on CONFIG_REGEX. Add an additional
test if that variable is set.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add a test of the env_attr_lookup() function.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add a new "env" subcommand to the ut command.

This will run unit tests on the env code. This should be targetable to
any device that supports the env features needed for the tests.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Put the driver model for the system back into a good state after
completing the DM testing.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Acked-by: NSimon Glass <sjg@chromium.org>

The asserts are sometimes called from the context of the test command
itself so make sure that a return that happens as a result of a failure
is compatible with that command return. When called within a test, the
return value is ignored.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Make sure that the env gets cleaned up after a test fails so that other
tests aren't affected.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

There's not much point in having a failure count if we always give up on
the first failure. Also stop clearing the entire state between tests.

Make sure that any failures are still passed out to the command line.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Make all unit tests selectable as a menu of test suites instead of just
sitting in the top-level menu individually.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Unify the command for running unit tests further by moving the "ut_time"
command over to "ut time".
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Unify the command for running unit tests further by moving the "dm test"
command over to "ut dm".
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Add a command that all other unit tests should be a sub-command of.
Also include a command that will run all tests.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Separate the ability to define tests and assert status of test functions
from the dm tests so they can be used more consistently throughout all
tests.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

When the ethaddr is changed in the env, update the device pdata at the
same time (only if it is probed for the DM case; only if registered for
the non-DM case). Again this gets us closer to completely non-polled
env needed to simplify the net_loop.

This requires that the NET feature select the REGEX feature.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

The bootfile env var is already kept up to date by the callback in net.c
so there is no need to poll it too.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Check that the common network stack's env vars conform to the proper
format for IP addresses.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Instead of checking for changes to the env each time we enter the
net_loop, use the env callbacks to update the values of the variables.
Don't update the variables when the source was programmatic, since the
variables were the source of the new value.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Use a regular expression to apply the default formatting flags for all
ethaddr env vars.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

We already could tell the difference in the callback between an import
and "other" which we called interactive. Now add further distinction
between interactive (i.e. running env set / env edit / env ask / etc.
from the U-Boot command line) and programmatic (i.e. when u-boot source
calls any variant of setenv() ).
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Allow the features that use env_attrs to specify regexs for the name
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

In some cases it can be helpful to have context in the callback about
the calling situation. This is needed for following patches.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

The logic to find the whole matching name was split needlessly between
the reverse_strstr function and its caller. Fully contain it to make the
interface for calling it more consistent.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

This function returned numbers for error codes. Change them to error
codes.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Enable some additional ENV commands in sandbox to aid in build testing
and run testing.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Stop using the sandbox arch Kconfig to override defaults for config
options. This is a bit of abuse and may be causing build problems.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

The defconfigs should not be edited directly. They should be generated
by editing the .config (through menuconfig or whatever) and then run
make savedefconfig to have the Kconfig system generate a clean defconfig

I did this for sandbox here with no actual changes.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Follow-up commit 7fc63cca (mpc85xx/T4240EMU: Remove T4240EMU
board), and commit 27e72156 (ppc4xx: Remove sc3 board),
filling the blank fields.
Reviewed-by: NStefan Roese <sr@denx.de>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Remove the calls to net_random_ethaddr() that some boards and some
drivers are calling. This is now implemented inside of net/eth.c

Enable the feature for all boards that previously enabled it.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Acked-By: Michael Walle <michael@walle.cc> (for the lsxl board part)

Series-changes: 2
-Fixed bfin build errors

We really don't want boards defining fixed MAC addresses in their config
so we just remove the option to set it in a fixed way. If you must have
a MAC address that was not provisioned, then use the random MAC address
functionality.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Implement the random ethaddr fallback in eth.c so it is in a common
place and not reimplemented in each board or driver that wants this
behavior.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Targets with CONFIG_NEEDS_MANUAL_RELOC do not use REL/RELA
relocation (mostly only GOT) where functions aray are not
updated. This patch is fixing function pointers passed to phy_register
function.
This patch was tested on Microblaze architecture.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

RTL8211F needs to enalbe TXDLY for RGMII during
phy initialization, so move it to rtl8211f_config
for early initialization.
Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com>
cc: Joe Hershberger <joe.hershberger@gmail.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

When the ethaddr changes in the env, the hardware should also be updated
so that MAC filtering will work properly without resetting U-Boot.

Also remove the manual calls to set the hwaddr that was included in a
few drivers as a result of the framework not doing it.
Reported-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Tested-by: NMichal Simek <michal.simek@xilinx.com>

RTL8211F has different registers from RTL8211E.
This patch adds support for RTL8211F PHY which
can be found on Freescale's T1023 RDB board.
Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Sunxi platforms use ARM Cortex A8, A7 and A15 (unsupported yet) CPU cores,
which all have 64 bytes cache line size.

This is required to e.g. enable USB gadget.
Signed-off-by: NPaul Kocialkowski <contact@paulk.fr>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>

sunxi_usbc_vbus_detect was renamed to sunxi_usb_phy_vbus_detect but
g_dnl_board_usb_cable_connected was still using the old name, breaking the build
when USB gadget is enabled.
Signed-off-by: NPaul Kocialkowski <contact@paulk.fr>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>

The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand,
sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot.

This commit adds a defconfig for the v1.1 pcb with an a33 soc.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NIan Campbell <ijc@hellion.org.uk>

We've never tested the lvds panel support on sun6i+ SoCs until now, and
unsurprisingly the lvds code needed some fixes to work on my ga10h A33
tablet with lvds panel. This makes the panel on that tablet actually work.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NIan Campbell <ijc@hellion.org.uk>

Make DRAM_ODT_EN Kconfig setting a bool, add a separate DRAM_ODT_CORRECTION
setting for A23 SoCs and use DRAM_ODT_EN Kconfig everywhere instead of
only in dram_sun4i.c and hardcoding odt_en elsewhere.

Note this commit makes no functional changes for existing boards,
its purpose is to allow changing the odt_en value on future A33 boards.

For sun4i/sun5i/sun7i boards which set DRAM_ODT_EN=y (which no defconfigs
currently do) this patch turns on odt for both the DQ and the DQS lines,
whereas previously it was possibly (but not desirable) to turn odt on only
for one of them by setting the in DRAM_ODT_EN option to 1 or 2 instead of 3.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NSiarhei Siamashka <siarhei.siamashka@gmail.com>

When porting the allwinner dram init code to u-boot we missed some code
setting an extra bit when doing auto dram config.

This commits add this bit, fixing dram init not working on the ga10h
10" a33 tablet which I'm bringing up atm.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NIan Campbell <ijc@hellion.org.uk>