Enable the DM ESPI driver in T2080RDB defconfig.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI slave node for T2080RDB.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM ESPI driver in T1042D4RDB defconfig.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI slave node for T1042D4RDB.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI controller DT node for T104x.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM ESPI driver in T1024RDB defconfig.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI slave node for T1024RDB.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI controller DT node for T102x.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM ESPI driver in P5040DS defconfig.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI slave node for P5040DS.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI controller DT node for P5040.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM ESPI driver in P4080DS defconfig.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI slave node for P4080DS.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI controller DT node for P4080.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM ESPI driver in P3041DS defconfig.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI slave node for P3041DS.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI controller DT node for P3041.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM ESPI driver in P2041RDB defconfig.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI slave node for P2041RDB.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI controller DT node for P2041.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM ESPI driver in P2020RDB defconfig.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI slave node for P2020RDB.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI controller DT node for P2020.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable the DM ESPI driver in P1020RDB defconfig.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI slave node for P1020RDB.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add ESPI controller DT node for P1020.
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

This patch is to enable  espi DM for T2080QDS in uboot
Signed-off-by: NChuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Rebased]
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add espi slave nodes  to support t2080qds.
Signed-off-by: NChuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add espi controller node to support t2080.
Signed-off-by: NChuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

binman enhancements for FIT
sunxi64 conversion to use binman
New 'no-map' property for reserved memory

When a message is written by a log driver (e.g. via the network stack) this
may result in the generation of further messages. We cannot allow these
additional messages to be emitted as this might result in an infinite
recursion.

Up to now only the syslog driver was safeguarded. We should safeguard all
log drivers instead.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

In the live tree API ofnode_parse_phandle_with_args, the cell_count
argument must be used when cells_name is NULL.

But this argument is not provided to the live DT function
of_parse_phandle_with_args even it is provided to
fdtdec_parse_phandle_with_args.

This patch adds support of the cells_count parameter in dev_ and
of_node API to allow migration and support of live DT:
- of_parse_phandle_with_args
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

OP-TEE reserved memory node must set property "no-map" to prevent
Linux kernel from mapping secure memory unless what non-secure world
speculative accesses of the CPU can violate the memory firmware
configuration.

Fixes: 6ccb05ea ("image: fdt: copy possible optee nodes to a loaded devicetree")
Signed-off-by: NEtienne Carriere <etienne.carriere@st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Add a test to verify that the no-map property is added in reserved-memory
node when fdtdec_add_reserved_memory() no-map parameter is set to true.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add boolean input argument @no_map to helper function
fdtdec_add_reserved_memory() to add or not "no-map" property
for an added reserved memory node.

Property no-map is used by the Linux kernel to not not map memory
in its static memory mapping. It is needed for example for the|
consistency of system non-cached memory and to prevent speculative
accesses to some firewalled memory.

No functional change. A later change will update to OPTEE library to
add no-map property to OP-TEE reserved memory nodes.
Signed-off-by: NEtienne Carriere <etienne.carriere@st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add a special help message pointing to the relevant README.
Signed-off-by: NSimon Glass <sjg@chromium.org>

When an external blob is missing it can be quite confusing for the user.
Add a way to provide a help message that is shown.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAlper Nebi Yasak <alpernebiyasak@gmail.com>

Add a new entry argument to the fit entry which allows selection of the
default configuration to use. This is the 'default' property in the
'configurations' node.

Update the Makefile to pass in the value of DEVICE_TREE or
CONFIG_DEFAULT_DEVICE_TREE to provide this information.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Suggested-by: NMichal Simek <michal.simek@xilinx.com>

Explain that binman interprets these environment variables in the
"External tools" section to run target/host specific versions of the
tools, and add a new section on how to use CROSS_COMPILE to run the
tests on non-x86 machines.
Signed-off-by: NAlper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This patch lets tools.Run() use host-specific versions with the
for_host keyword argument, based on the host-specific environment
variables (HOSTCC, HOSTOBJCOPY, HOSTSTRIP, etc.).
Signed-off-by: NAlper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>