- 26 1月, 2016 10 次提交
-
-
由 Vishnu Patekar 提交于
Different A83T boards have different DRAM types. Banapi M3 has LPDDR3, Allwinner Homlet v1.2 has DDR3. This adds groundwork to support for new DRAM type for A83T. Introduce CONFIG_DRAM_TYPE, It'll be 3 for DDR3 and 7 for LPDDR3, must be set in respective board defconfig. Signed-off-by: NVishnu Patekar <vishnupatekar0510@gmail.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Vishnu Patekar 提交于
This removes the redundant lines of code from mctl_sys_init. Signed-off-by: NVishnu Patekar <vishnupatekar0510@gmail.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
Now that we support PSCI and various security switches, we can let U-boot boot Linux into non-secure and HYP mode. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
H3 has the same power sequencing procedure as the A31/A31s, which includes the power clamps. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
H3's CCU includes some switches which disable non-secure access to some of the more critical clock controls, such as MBUS, PLLs, and main platform busses. Configure them to enable non-secure access. For now the only SoC that has this feature is the H3. For other platforms just use a default (weak) empty function so things do not break. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
Secure Memory Touch Arbiter is the same thing as the TrustZone Protection Controller found on A31/A31s. Access to many peripherals on the H3 can be controlled by the SMTA, and the settings default to secure access only. This patch supports the new settings, and sets them to allow non-secure access. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Hans de Goede 提交于
Adds poweroff support for axp221 pmic. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Michael van Slingerland 提交于
Adds poweroff support for axp209 pmic. Signed-off-by: NMichael van Slingerland <michael@deviousops.nl> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
Adds poweroff support for axp152 pmic. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Stephen Warren 提交于
The Linux kernel, from which checkpatch originates, contains function ether_addr_copy() to copy Ethernet MAC addresses, and checkpatch warns that it should be used in preference to memcpy() where appropriate. U-Boot doesn't contain ether_addr_copy(), so tell checkpatch not to issue this warning. Signed-off-by: NStephen Warren <swarren@nvidia.com> Reviewed-by: NMarek Vasut <marex@denx.de> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Tested-by: NAnand Moon <linux.amoon@gmail.com> Reviewed-by: NAnand Moon <linux.amoon@gmail.com>
-
- 25 1月, 2016 26 次提交
-
-
-
由 Thomas Chou 提交于
Zap the rockchip serial compatible string, because rockchip serial has "snps,dw-apb-uart" compatible string in the dts. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Thomas Chou 提交于
Replace ns16550.txt with binding files from Linux kernel. As suggested by Stephen Warren, we should keep the directory structure, filenames, and file content identical to the bindings in the Linux kernel. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NStephen Warren <swarren@nvidia.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Adam Ford 提交于
Since we are manipulating GPIO 189 to determine the board type, we need to enable the GPIO Bank 6. Signed-off-by: NAdam Ford <aford173@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Ladislav Michl 提交于
Do not undefine CONFIG_BOOTDELAY, so board can boot without user intervention. Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Acked-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
-
由 Bin Meng 提交于
With kernel.org toolchain, it reports: CC arch/openrisc/lib/board.o arch/openrisc/lib/board.c:56:2: error: 'console_init_f' undeclared here (not in a function) arch/openrisc/lib/board.c: In function 'board_init': arch/openrisc/lib/board.c:120:2: warning: implicit declaration of function 'console_init_r' make[1]: *** [arch/openrisc/lib/board.o] Error 1 make: *** [arch/openrisc/lib] Error 2 Include console.h will fix this. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
When building katmai, it reports quite a lot warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Fix this by casting the dev->iobase with u_long. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Bin Meng 提交于
With gcc 4.9, it produces the following warnings: CC board/tqc/tqm834x/tqm834x.o board/tqc/tqm834x/tqm834x.c: In function 'initdram': board/tqc/tqm834x/tqm834x.c:325:12: warning: iteration 3u invokes undefined behavior [-Waggressive-loop-optimizations] (((base + size - 1) >> CSBNDS_EA_SHIFT) & ^ board/tqc/tqm834x/tqm834x.c:80:2: note: containing loop for(cs = 0; cs < 4; ++cs) { ^ There is an integer overflow when cs = 3. To fix it, change parameters of set_cs_bounds() to ulong. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
Currently buildman fails to build sh7753evb and reports the following: board/renesas/sh7753evb/built-in.o: In function 'init_gether_mdio': board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'PMB_ADDR_BASE' board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'PMB_DATA_BASE' board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'mk_pmb_addr_val' board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'mk_pmb_data_val' make: *** [u-boot] Error 1 The fix is to wrap any codes that access these macros with CONFIG_SH_32BIT. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Masahiro Yamada 提交于
BUILD_BUG_* macros have been defined in several headers. It would be nice to collect them in include/linux/bug.h like Linux. This commit is cherry-picking useful macros from include/linux/bug.h of Linux 4.4. I did not import BUILD_BUG_ON_MSG() because it would not work if it is used with include/common.h in U-Boot. I'd like to postpone it until the root cause (the "error()" macro in include/common.h causes the name conflict with "__attribute__((error()))") is fixed. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Masahiro Yamada 提交于
This reverts commit 67871a59. Since that commit, out-of-tree cleaning emits lots of warnings. $ make O=foo clean make[1]: Entering directory `/home/masahiro/workspace/u-boot/foo' ../dts/../arch/arm/dts/Makefile:209: warning: overriding commands for target `dtbs' ../dts/../arch/arc/dts/Makefile:15: warning: ignoring old commands for target `dtbs' ../dts/../arch/microblaze/dts/Makefile:13: warning: overriding commands for target `dtbs' ../dts/../arch/arm/dts/Makefile:209: warning: ignoring old commands for target `dtbs' ../dts/../arch/mips/dts/Makefile:14: warning: overriding commands for target `dtbs' ../dts/../arch/microblaze/dts/Makefile:13: warning: ignoring old commands for target `dtbs' ../dts/../arch/nios2/dts/Makefile:13: warning: overriding commands for target `dtbs' ../dts/../arch/mips/dts/Makefile:14: warning: ignoring old commands for target `dtbs' ../dts/../arch/powerpc/dts/Makefile:13: warning: overriding commands for target `dtbs' ../dts/../arch/nios2/dts/Makefile:13: warning: ignoring old commands for target `dtbs' ../dts/../arch/sandbox/dts/Makefile:14: warning: overriding commands for target `dtbs' ../dts/../arch/powerpc/dts/Makefile:13: warning: ignoring old commands for target `dtbs' ../dts/../arch/x86/dts/Makefile:22: warning: overriding commands for target `dtbs' ../dts/../arch/sandbox/dts/Makefile:14: warning: ignoring old commands for target `dtbs' make[1]: Leaving directory `/home/masahiro/workspace/u-boot/foo' Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Mateusz Kulikowski 提交于
Use existing library function to poll bit(s). Signed-off-by: NMateusz Kulikowski <mateusz.kulikowski@gmail.com>
-
由 Mateusz Kulikowski 提交于
Use existing library function to poll bit(s). Signed-off-by: NMateusz Kulikowski <mateusz.kulikowski@gmail.com>
-
由 Mateusz Kulikowski 提交于
Use existing library function to poll bit(s). Signed-off-by: NMateusz Kulikowski <mateusz.kulikowski@gmail.com> Tested-by: NSylvain Lemieux <slemieux@tycoint.com>
-
由 Mateusz Kulikowski 提交于
Use existing library function to poll bit(s). Signed-off-by: NMateusz Kulikowski <mateusz.kulikowski@gmail.com>
-
由 Mateusz Kulikowski 提交于
Add function to poll register waiting for specific bit(s). Similar functions are implemented in few drivers - they are almost identical and can be generalized. Signed-off-by: NMateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
clang-3.8 reports that these functions are unused, remove them. As this is the last part of CONFIG_MODEM_SUPPORT_DEBUG, drop that from README. Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This is already defined in ide.h, which part.h includes. So we don't need the duplicate typedef. At least with my old blackfin gcc 4.3.5 tool chain, this causes an error. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Clemens Gruber 提交于
This enables boards to choose where to/from the environment should be saved/loaded. They can then for example support using the same device (dynamically) from which the bootloader was launched to load and save env data and do not have to define CONFIG_SYS_MMC_ENV_DEV statically. In my use case, the environment needs to be on the same device I booted from. It can be the eMMC or an optional SD card. I therefore would override mmc_get_env_dev in the board code, read the CPU registers to determine where we booted from and return the corresponding device index. Cc: Tom Rini <trini@konsulko.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Simon Glass <sjg@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: NClemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: NStephen Warren <swarren@nvidia.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
clang-3.8 reports that serial_putc_raw_dev in serial_ns16550.c is unused. Further investigation shows that we have 3 places that implement this function and no callers, remove. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Purna Chandra Mandal 提交于
Variable _load_end_ points to end address of uncompressed buffer (*not* uncomress_buffer_end / sizeof(ulong)), so multipling uncompressed size with sizeof(ulong) is grossly incorrect in flush_cache(). It might lead to access of address beyond valid memory range and hang the CPU. Tested on MIPS architecture by using compressed(gzip, lzma) and uncompressed uImage. Signed-off-by: NPurna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Tom Rini 提交于
For compatibility clang will report some gcc version. However since we are checking gcc versions in order to then fail to build, we should limit these tests only to when we are using gcc and not clang. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Adapted from: >From 5631d9c429857194bd55d7bcd8fa5bdd1a9899a3 Mon Sep 17 00:00:00 2001 From: Michal Marek <mmarek@suse.com> Date: Wed, 19 Aug 2015 17:36:41 +0200 Subject: [PATCH 1/1] kbuild: Fix clang detection We cannot detect clang before including the arch Makefile, because that can set the default cross compiler. We also cannot detect clang after including the arch Makefile, because powerpc wants to know about clang. Solve this by using an deferred variable. This costs us a few shell invocations, but this is only a constant number. Reported-by: NBehan Webster <behanw@converseincode.com> Reported-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichal Marek <mmarek@suse.com> in the Linux kernel. This will allow us to make better decisions about when to run tests later on for gcc features. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
Now that they are in their own directory, we can remove this prefix. This makes it easier to find a file since the prefix does not get in the way. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NHeiko Schocher <hs@denx.de> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
-
由 Simon Glass 提交于
There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NHeiko Schocher <hs@denx.de> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
-
由 Peng Fan 提交于
This commit 4bdcbe60 removes reset_cpu which breaks SPL build when DEBUG macro defined. " arch/arm/lib/built-in.o: In function `do_reset': ~/uboot/arch/arm/lib/reset.c:45: undefined reference to `reset_cpu' scripts/Makefile.spl:244: recipe for target 'spl/u-boot-spl' failed " Enable CONFIG_SPL_WATCHDOG_SUPPORT to fix this issue. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Acked-by: NEric Nelson <eric@nelint.com>
-
- 24 1月, 2016 4 次提交
-
-
由 Peng Fan 提交于
The management data input/output (MDIO) requires open-drain, i.MX7D TO1.0 ENET MDIO pin has no open drain, but TO1.1 supports this feature. So to TO1.1, need to enable open drain by setting bits GPR0[8:7] for TO1.1. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Check "Figure 19-5. BUS clock generation" of i.MX 6SoloX Applications Processor Reference Manual and "Figure 18-5. BUS clock generation" of i.MX 6UltraLite Applications Processor Reference Manual. If mmdc clk sources from pll4_main_clk(pll_audio), the calculation is wrong. Fix mmdc_ch0 clk calculation. Also add PLL_AUDIO/VIDEO support for decode_pll. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Add more entries for structure mxc_ccm_reg. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NEric Nelson <eric@nelint.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Add pinmux settings. Add related macro definitions. Nand pin conflicts with emmc, so if want to enable nand, need to do hardware rework. After hardware rework, define CONFIG_NAND_MXS in board header file. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-