This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig.
Update defconfigs.
Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on
USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and
LAN78XX options under new menu. Finally update the defconfigs that need
CONFIG_USB_HOST_ETHER.
Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This is not a valid option. Drop it.
Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This is not a valid option. Drop it.
Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

The correct name is 'gd->fdt_blob', not 'gd->blob'.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Simon Glass <sjg@chromium.org>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

With Makefiles testing for $(SPL_TPL_)SYSRESET, we need SPL_SYSRESET
for do_reset() in SPL for Rockchip SoCs.

References: 87c16d49 "drivers: spl: consistently use the $(SPL_TPL_) macro"
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

syscon id table need a dummy member as NULL ending, or else system
will panic while try to match a compatible in this table as a list.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Disable CONFIG_ARCH_FIXUP_FDT_MEMORY to prevent U-Boot from modifying
the memory {} nodes in the DT passed to the Linux kernel. The R8A779x
DT contains multiple memory {} nodes, while U-Boot only modifies the
first one and stuffs all the memory entries into it, which is wrong.
Disabling CONFIG_ARCH_FIXUP_FDT_MEMORY is the least intrusive way to
fix the issue this close to the release, while the real fix is to
extend the fdt_fixup_memory_banks() to handle multiple memory nodes
in DT.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

On RCar M3 and on RCar H3 newer than and not including ES1.0, the SD clock
must be divided by 4 rather than 2 because a hardware workaround present
only in the H3 ES1.0 has been removed from these chips. U-Boot currently
only supports M3 and H3 ES 2.0 and newer, so configure the SD pre-divider
to 4 to prevent SD instability.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

%s/Desriptor/Descriptor/g
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Acked-by: NYork Sun <york.sun@nxp.com>

In the general case, CONFIG_NFS_READ_SIZE is unchanged from the default
of 1024.  There are in fact no in-tree users that increase this size.
Adjust the comment to reflect what could be done in the future in
conjunction with CONFIG_IP_DEFRAG.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

The old logic always enabled the TX-delay when the phy-mode was set to
PHY_INTERFACE_MODE_RGMII. With this patch we enable the TX delay for
PHY_INTERFACE_MODE_RGMII_ID and PHY_INTERFACE_MODE_RGMII_TXID and
disable it for PHY_INTERFACE_MODE_RGMII.

Based on a similar change made in the Linux Realtek PHY driver
by Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Acked-by: NYork Sun <york.sun@nxp.com>

Delete one redundant 'which' for SPL_ATF_SUPPORT description.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

Remove a comment line refering to a non-existent file.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

The inline documentation of vsprintf mentions a parameter size
which does not exist in the function declaration.

int vsprintf(char *buf, const char *fmt, va_list args);
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

This reverts commit 25877d4e.

This is a workaround for Raspberry Pi boot failures seen when passing on
the device tree provided by the Raspberry Pi firmware at boot. Without
CONFIG_OF_EMBED, we just get stuck at "Starting kernel ..." when we try
to boot Linux with this device tree.
Signed-off-by: NPaul Barker <pbarker@toganlabs.com>
Cc: Simon Glass <sjg@chromium.org>
Tested-by: NJonathan Gray <jsg@jsg.id.au>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Some files are generated during libfdt build. Ignore them.

This was wrongly put in the .gitignore in the root directory before.
Now let's remove entries there and put them in the right place.

Fixes: 34e2c285 ("gitignore: add intermediates from libfdt build")
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

These are currently out of alphabetical order.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

Signed-off-by: NAlison Chaiken <alison@she-devel.com>

Change to use 'debug' to output the error message if it fails to
read the driver descriptor block.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

The target is not currently mentioned anywhere. Add it to the help so
people can find it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This was broken by the recent environment refactoring. Specifically:

$  make environ
scripts/Makefile.build:59: tools/environ/Makefile: No such file or directory
make[1]: *** No rule to make target 'tools/environ/Makefile'.  Stop.
make: *** [Makefile:1469: environ] Error 2

Fix this by updating the Makefile and adjusting the #include filesnames in
two C files.

Fixes: ec74f5f9 (Makefile: Rename 'env' target to 'environ')
Reported-by: NMåns Rullgård <mans@mansr.com>
Signed-off-by: NSimon Glass <sjg@chromium.org>

Since commit 842778a0 ("usb: gadget: g_dnl: only set iSerialNumber
if we have a serial#") "fastboot devices" stopped to show correct device
serial number for TI boards, showing this line instead:

    ????????????	fastboot

This is because serial# env variable could be set after g_dnl gadget was
initialized (e.g. by using env_set() in the board file).

To fix this, let's update internal serial number variable (g_dnl_serial)
when "serial#" env var is changed.
Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Tested-by: NHeiko Schocher <hs@denx.de>
Acked-by: NŁukasz Majewski <lukma@denx.de>
Reviewed-by: NMarek Vasut <marex@denx.de>

With the move of environment code from common/ to env/ a number of
changes needed to be made to various make targets.  We missed updating
some of the files required for out of tree builds of the tools.  Correct
the 'environ' target to know that we need to work under tools/env/ still
(not tools/environ/) and then update the wrappers in env_attr.c and
env_flags.c to point to the new correct file.
Reported-by: NPeter Robinson <pbrobinson@gmail.com>
Tested-by: NPeter Robinson <pbrobinson@gmail.com>
Signed-off-by: NTom Rini <trini@konsulko.com>

LCD drivers are video related, so add them to video section.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

The hw can read up to 32 bytes at a time. If we need
more than one chunk, we have to enter the plain RX mode.
Signed-off-by: NWadim Egorov <w.egorov@phytec.de>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

enable the ATF option and SDCard in defconfig.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

When I originally added this driver, I did some careless (and in
retrospect: mindless) copy & paste for the U_BOOT_DRIVER structure
skeletion... unfortunately, the 'arc_timer' string was committed
and slipped through all reviews.

This fixes the U_BOOT_DRIVER name to read 'rockchip_rk3368_timer'
(as originally intended).
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reported-by: NArtturi Alm <artturi.alm@gmail.com>

Sometimes it's helpful to know the reset reason caused in the SoC.
Add reset reason detection for the RK3288 SoC.
This will set an environment variable which represents the reset reason.
Signed-off-by: NWadim Egorov <w.egorov@phytec.de>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Read SoM information from EEPROM and set ethaddr in late init.
Signed-off-by: NWadim Egorov <w.egorov@phytec.de>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

The IPSR18 register bits were missing from the R8A7795 ES2.0+ PFC
tables, which triggered a BUG() in sh_pfc driver. This is because
of an out-of-bounds access to the pinmux_gpios[] array in the PFC
tables, which was too short due to the missing IPSR18 bits.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

The board_mmc_init() is no longer invoked when DM is used, so move
all the pinmux config into board_init() instead.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

The configuration option name is the later, so replace usage of
CONFIG_RAVB in board files with CONFIG_RENESAS_RAVB , otherwise
the RAVB pinmux is not set and ethernet does not work.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Before reading entire FIT image, add sanity check by testing image
header against FDT_MAGIC. This should help avoid problems in situations
where FIT is not yet available from storage device, for example when
performing initial programming of device.

Cc: Anatolij Gustschin <agust@denx.de>
Acked-by: NTomas Melin <tomas.melin@vaisala.com>