This patch fixes the issue by defining and using
CONFIG_SYS_INIT_RAM_SIZE and CONFIG_SYS_INIT_RAM_ADDR.

This patch adopts the
commit 31bfcf1c
from Steve Sakoman and Sandeep Paulraj on Devkit8000.
Signed-off-by: NThomas Weber <weber@corscience.de>

CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.
Signed-off-by: NWolfgang Denk <wd@denx.de>
Acked-by: NKumar Gala <galak@kernel.crashing.org>

Fix compilation of Devkit8000 after introduction of
ARM relocation support.
Signed-off-by: NThomas Weber <weber@corscience.de>

Adapt to TEXT_BASE => CONFIG_SYS_TEXT_BASE rename.
Signed-off-by: NWolfgang Denk <wd@denx.de>

The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9

Cortex A8 and A9 both belong to the armv7 architecture, hence the name change.

The two architectures are similar enough that substantial code can be shared.
Signed-off-by: NAneesh V <aneesh@ti.com>
Signed-off-by: NSteve Sakoman <steve@sakoman.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Consolidated SDRC related functions into one file - sdrc.c

And also replaced sdrc_init with generic memory init
function (mem_init), this generalization of omap memory setup
is necessary to support the new emif4 interface introduced in AM3517.
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Consolidated SDRC related functions into one file - sdrc.c

And also replaced sdrc_init with generic memory init
function (mem_init), this generalization of omap memory setup
is necessary to support the new emif4 interface introduced in AM3517.
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Every omap3 board config file declared the global variable gpmc_cfg.
This changes moves the declaration to a better location in the
arch dependent header file cpu.h.
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Every omap3 board config file declared the global variable gpmc_cfg.
This changes moves the declaration to a better location in the
arch dependent header file cpu.h.
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.
Signed-off-by: NHeiko Schocher <hs@denx.de>

Micron DDR timings based on:
http://www.sakoman.net/cgi-bin/gitweb.cgi?p=x-load-omap3.git;a=blob;f=include/asm/arch-omap3/mem.h;h=e6fbfe3947f5d0d85fea776e30821d4017316d86;hb=HEAD

Introduce Micron DDR timings and provide
CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config
options to allow for platform files to setup their timings as
per the type of DDR selected

Reported-by: Steve Sakoman in http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page=ySigned-off-by: NNishanth Menon <nm@ti.com>

This patch removes dependency on the sizes.h header file
and removes all references to SZ_xx.
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

This changes fixes an early i2c error.

It appears that I2C is working because once a read or write
error is detected, the omap24xx_i2c driver calls i2c_init
inside its error handling check.

While it is ok to attempt error handling this way, the boards
must not depend on this side effect to initialize it's i2c.

Instead of explicitly calling i2c_init for every board, use
the generic arm initialization in lib_arm/board.c. By defining
the config variable CONFIG_HARD_I2C, the omap3 i2c initialization
is included in the init_sequence table.

Run tested on Beagle.
Compile tested on the omap3's
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>
Acked-by: NDirk Behme <dirk.behme@googlemail.com>

This changes fixes an early i2c error.

It appears that I2C is working because once a read or write
error is detected, the omap24xx_i2c driver calls i2c_init
inside its error handling check.

While it is ok to attempt error handling this way, the boards
must not depend on this side effect to initialize it's i2c.

Instead of explicitly calling i2c_init for every board, use
the generic arm initialization in lib_arm/board.c. By defining
the config variable CONFIG_HARD_I2C, the omap3 i2c initialization
is included in the init_sequence table.

Run tested on Beagle.
Compile tested on the omap3's
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>
Acked-by: NDirk Behme <dirk.behme@googlemail.com>

This patch adds support for the DevKit8000 board.
Signed-off-by: NFrederik Kriewitz <frederik@kriewitz.eu>

Signed-off-by: NMatthias Ludwig <mludwig@ultratronik.de>
Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>

Embedd chip select configuration into struct for gpmc config
instead of having it completely separated as suggested by
Wolfgang Denk on
http://lists.denx.de/pipermail/u-boot/2009-May/052247.htmlSigned-off-by: NMatthias Ludwig <mludwig@ultratronik.de>

Because twl4030 now has its own device files, move exiting
omap3 power_init_r to a new location.

power_init_r is the only function in board/omap3/common.
It initializes the twl4030 power for the board and enables
the led.

The power part of the the function is moved to twl4030_power_init in
drivers/power/twl4030.c The power compilation is conditional on the
existing config variable CONFIG_TWL4030_POWER.

The led part is moved to twl4030_led_init in the new file
drivers/misc/twl4030_led.c  The led compilation is conditional on
the new config variable CONFIG_TWL4030_LED

The directory board/omap3/common was removed because power_init_r
was the only function in it.
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NHeiko Schocher <hs@denx.de>

Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.

This patch covers the non-PPC boards that were missed in the previous
patch (commit 170c1972).
Signed-off-by: NWolfgang Denk <wd@denx.de>

By changing the cmd_mtdparts to only use the MTD infrastructure and
not the direct interface to the CFI NOR FLASH driver we now need
to add the MTD infrastructure to all boards using those mtdparts
commands. This patch adds those components:

CONFIG_MTD_DEVICE (for all FLASH types)

plus

CONFIG_FLASH_CFI_MTD (for NOR FLASH)

To all board maintainers: Please test this on your platforms and
report any problems/issues found. Thanks.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ron Madrid <info@sheldoninst.com>
Cc: Georg Schardt <schardt@team-ctech.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Martin Krause <martin.krause@tqs.de>
Cc: Gary Jennejohn <garyj@denx.de>
Cc: Ricardo Ribalda <ricardo.ribalda@uam.es>

Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>
Signed-off-by: NManikandan Pillai <mani.pillai@ti.com>

Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.
Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>

Use the functions print_cpuinfo() and checkboard() to
display the cpu and board specific information.

These functions reuse content from the existing function
display_board_info() - which has been removed.

Also, updated the existig OMAP3 configurations to
define:
 - CONFIG_DISPLAY_CPUINFO
 - CONFIG_DISPLAY_BOARDINFO
Signed-off-by: NSanjeev Premi <premi@ti.com>

In recent U-Boot mmcinit changed to mmc init.
Signed-off-by: NSteve Sakoman <steve@sakoman.com>
Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>

According to the doc/feature-removal-schedule.txt, the "autoscr"
command will be replaced by the "source" command in approximately 6
months from now.

This patch prepares this change and starts a 6 month transition
period as follows:

- The new "source" command has been added, which implements exactly
  the same functionlaity as the old "autoscr" command before
- The old "autoscr" command name is kept as an alias for compatibility
- Command sequences, script files atc. have been adapted to use the
  new "source" command
- Related environment variables ("autoscript", "autoscript_uname")
  have *not* been adapted yet; these will be renamed resp. removed in
  a separate patch when the support for the "autoscr" command get's
  finally dropped.
Signed-off-by: NWolfgang Denk <wd@denx.de>

Divisor field is called PTV not PVT.
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NLadislav Michl <ladis@linux-mips.org>

http://www.denx.de/wiki/DULG/UBootCmdGroupFlash#UBootCmdFlMtdparts
provides a flexible way to create and maintain u-boot mtd
partitions. This allows commands such as "nand erase fs"
to work and the user no longer needs to decode the absolute
nand offsets. This patch enables this function for beagleboard
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Add BeagleBoard support, common power code and README.
Signed-off-by: NJason Kridner <jkridner@beagleboard.org>
Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>