- Fix BUILD_TARGET for ARCH_MVEBU from Baruch
- Fix MVEBU PCIe reset issues from Baruch
- Increase DDR stability on x530 from Chris

MV_DDR_FREQ_SAR lets the DDR frequency be determined by hardware
strapping. This also has the side effect of running the DDR clock in
synchronous mode with the CPU core clock rather than from an independent
PLL. We've seen this improve reliability in operation across a number of
boards and temperature ranges.
Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NStefan Roese <sr@denx.de>
Signed-off-by: NStefan Roese <sr@denx.de>

Commit dc146ca1 ("Kconfig: Migrate CONFIG_BUILD_TARGET") made the
mvebu default build target depend on CONFIG_SPL_BUILD. Unfortunately,
there is no such Kconfig symbol. Use the CONFIG_SPL symbol instead to
fix that.

Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Reviewed-by: NStefan Roese <sr@denx.de>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Describe the mini-PCIe slot gpio reset signal. This enables PCIe devices
on Clearfog GT-8K.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Reviewed-by: NStefan Roese <sr@denx.de>
Signed-off-by: NStefan Roese <sr@denx.de>

The dm_gpio_set_value() routine sets signal logical level, with
GPIO_ACTIVE_LOW/HIGH value taken into account. Reset active value is 1
(asserted), while reset inactive value is 0 (de-asserted). Fix the reset
toggle code to set the correct reset logic value.
Reported-by: NSven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Reviewed-by: NStefan Roese <sr@denx.de>
Signed-off-by: NStefan Roese <sr@denx.de>

The PCIe slot PERST signal is active low. Fix the gpio signal
description in the dts.

This happened to work because the pcie_dw_mvebu driver sets the reset
gpio level to 1 (high) to release the reset. The following commit will
fix that.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Reviewed-by: NStefan Roese <sr@denx.de>
Signed-off-by: NStefan Roese <sr@denx.de>

- SD/MMC fixes and ext4 memory leak fix

Samsung sound patches (applied for Samsung maintainer)
Common sound support
buildman environment support
of-platdata documentation improvements

- bcm6345 watchdog, bcm63158/bcm963158 initial support.
- Various TI platform resyncs and improvements.
- FDT support in Android-format images.
- stm32mp1 improvements.

At present there is still some samsung-specific code in the audio codecs.
Remove it so that these can be used by other SoCs.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Fix a struct typo and drop a comment (and function prototype) which is not
actually used.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Fix a typo that appears many times in this file.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Allow misc devices to have children, so that we can use this uclass for
cases where a child device (e.g. I2S) needs to access a misc driver for
transferring data.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Fix a typo in the error message from CheckOutputDir().
Signed-off-by: NChris Packham <judge.packham@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Improve some things in the documentation of OF_PLATDATA that I found
while porting socfgpa_gen5 to it.
Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Sometimes it is useful to see the environment that was used to build
U-Boot. Write this out to a file in the build directory.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Use regulator_set_enable_if_allowed() api instead of regulator_set_enable()
while enabling io regulators. This way the driver doesn't see an error
when disabling an always-on regulator and when enabling is not supported.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>

regulator_set_enable() api throws an error in the following three cases:
- when requested to disable an always-on regulator
- when set_enable() ops not provided by regulator driver
- when enabling is actually failed.(Error returned by the regulator driver)

Sometimes consumer drivers doesn't want to track the first two scenarios
and just need to worry about the case where enabling is actually failed.
But it is also a good practice to have an error value returned in the
first two cases.

So introduce an api regulator_set_enable_if_allowed() which ignores the
first two error cases and returns an error as given by regulator driver.
Consumer drivers can use this api need not worry about the first two
error conditions.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This reverts commit e17e0ceb.

It is advised to return an error when trying to disable an always-on
regulator and let the consumer driver handle the error if needed.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>

This is no-longer used. Drop it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NLukasz Majewski <lukma@denx.de>

This enum still exists but we can shrink it a little based on recent
driver-model conversions with samsung. Update it to remove unused items.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NLukasz Majewski <lukma@denx.de>

Now that these boards use driver model we can drop the old code. At
present s5p_mmc_init() is still used by goni and smdkv310 so cannot be
removed unless we remove those boards.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NLukasz Majewski <lukma@denx.de>
Reviewed-by: NMinkyu Kang <mk7.kang@samsung.com>

This function is not needed now since the audio codecs have been converted
to proper drivers. The codec-enable GPIO is handled there.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NLukasz Majewski <lukma@denx.de>
Reviewed-by: NMinkyu Kang <mk7.kang@samsung.com>

Update the flashmap so that this board can be started over USB A-A. It
is slightly different from snow.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NLukasz Majewski <lukma@denx.de>

Update the spring settings to use this codec, which is what it actually
shipped with.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NLukasz Majewski <lukma@denx.de>

This chip is used by spring. Add a driver for it and update the
samsung_sound driver to pick it up.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move all exynos boards over to use CONFIG_BLK.

This converts s5p_goni also, but adding dummy functions for pinmux and
peripheral ID. This will not function correctly, but gives the maintainer
more time to convert the board if desired.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NLukasz Majewski <lukma@denx.de>
Reviewed-by: NMinkyu Kang <mk7.kang@samsung.com>

At present the model is shown twice, once in the generic code and once
in the exynos code. Drop the latter.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NLukasz Majewski <lukma@denx.de>
Reviewed-by: NMinkyu Kang <mk7.kang@samsung.com>

This converts the following to Kconfig:
   CONFIG_BOARD_TYPES
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NLukasz Majewski <lukma@denx.de>
Acked-by: NAlexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: NMinkyu Kang <mk7.kang@samsung.com>

Perform some cosmetic cleanup of the ATF image startup function, namely
fixing a spelling mistake, capitalization of a few words, spacing, as
well aligning how errors are printed and as using panic() for cases that
were using a combination of printf() + hang().
Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com>
Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>

The option OF_EMBED is deprecated,
so we switch to CONFIG_OF_SEPARATE
Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com>

The name of the board is bcm968580xref,
so rename the config to bcm968580xref too.
Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com>

The first element in the debug section is expected to be debugUID.
ROM will not parse this correctly when out of order, fix this here.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>

Bootm will fail to load kernels over 8MB, this is not enough
for our 64bit kernel images. Increase this to 64MB.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>

The second loader stages may be stored on GPT partitions,
enable support for this here.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>

Calling sata_scan() with a null pointer probably won't make much sense.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

While uclass_find_device() fails with -ENODEV in case of list_empty
strangely uclass_find_first_device() returns 0.

Fix uclass_find_first_device() to also fail with -ENODEV instead.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Enable watchdog and reboot with watchdog in the configuration.
Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com>

This commit add watchdog and sysreset watchdog
in the bcm63158 device tree.
Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com>

This IP is also used on some arm SoC, so we allow to
use it on arm bcm63158 too.
Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com>