- 22 8月, 2014 24 次提交
-
-
由 Masahiro Yamada 提交于
CONFIG_DEFCONFIG_LIST specifies the default defconfig. It is used by "make savedefconfig" when .config is missing. But that's it. I could not find other useful cases. As a side effect, CONFIG_DEFCONFIG_LIST="configs/sandbox_defconfig" is contained in .config of every target board, which some people think is odd. So, let's remove it. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Vasili Galka 提交于
The command generating the "common/system_map.o" file was always shown during the build making the output messy. Now it is called using the Kbuild "cmd" macro, so that the full command is shown only when building in verbose mode. Signed-off-by: NVasili Galka <vvv444@gmail.com>
-
由 Colin Cross 提交于
Add a BSD-3 relicensed version of the Android sparse format image header from: https://android.googlesource.com/platform/system/core/+/28fa5bc347390480fe190294c6c385b6a9f0d68b/libsparse/sparse_format.h Unchanged except for the license header. Cc: Tom Rini <trini@ti.com> Signed-off-by: NColin Cross <ccross@android.com>
-
由 Jeroen Hofstee 提交于
Provide stubs in case that no NET interface is supported. Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Marek Vasut 提交于
Add i210 support to the e1000 driver. Signed-off-by: NMarek Vasut <marex@denx.de> Acked-by: NTim Harvey <tharvey@gateworks.com>
-
由 Marek Vasut 提交于
Implement proper support for cache flushing and invalidation into the Intel e1000 NIC driver. Signed-off-by: NMarek Vasut <marex@denx.de> Acked-by: NTim Harvey <tharvey@gateworks.com>
-
由 Roger Meier 提交于
The existing terminalsize detection raised an exception on build server. Just removes the exception. This also deactivates the progress indicator. Remove a trainling whitespace. Signed-off-by: NRoger Meier <roger@bufferoverflow.ch> CC: Masahiro Yamada <yamada.m@jp.panasonic.com> CC: Tom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
Prior to Kconfig, the CPU field of boards.cfg could optionally have ":SPLCPU", like "armv7:arm720t". (Actually this syntax was only used for Tegra platform.) Now it is not necessary at all because CPU is defined by CONFIG_SYS_CPU in Kconfig. For Tegra platform, the Kconfig option is described as follows: config SYS_CPU string default "arm720t" if SPL_BUILD default "armv7" if !SPL_BUILD Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Hans de Goede 提交于
Use cli_simple_process_macros, so that environment variables (e.g. ${console}) can be used in append strings. Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Masahiro Yamada 提交于
Emails to Sandeep Paulraj <s-paulraj@ti.com> have been bouncing. Please assign new maintainer(s) to get these boards back to Maintained. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
This board has been orphaned for a while and old enough. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
These boards have been orphaned for a while and old enough. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This board has been orphaned for a while and old enough. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This board has been orphaned for a while and old enough. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This board has been orphaned for a while and old enough. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Emails to the board maintainer "Rishi Bhattacharya <rishi@ti.com>" have been bouncing. Tom suggested to remove this board. Remove also omap1510_udc.c because this is the last board to enable it. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Suggested-by: NTom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
Import scripts/objdiff improvements from Linux v3.16, which consists of 7 commits written by me. commit 7fa0e6db3cedc9b70d68a4170f1352e2b1aa0f90 scripts: objdiff: support directories for the augument of record command commit 8ac28bee76eec006aac5ba5c418878a607d53a9b scripts: objdiff: fix a comment commit 8b5d0f20d64f00ffd5685879f8eb3659379f5aaa scripts: objdiff: change the extension of disassembly from .o to .dis commit 18165efa8203a34d82f60a1831ea290e7304c654 scripts: objdiff: improve path flexibility for record command commit 1ecc8e489abfdaa6d8d1689f7ff62fdf1adda30c scripts: objdiff: remove unnecessary code commit 5ab370e91af70d5f1b1dbaec78798a2ff236a2d5 scripts: objdiff: direct error messages to stderr commit fd6e12423311697860f30d10398a0f9eb91977d2 scripts: objdiff: get the path to .tmp_objdiff more simply Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
"make %_config all" was supported for the first time in U-Boot: commit 53bca5ab kbuild: support simultaneous board configuration and "make all" Surprisingly it had not been working in Linux Kernel for a long time. So I sent back the patch to the Linux Kbuild community and it was accepted with a little code improvement, at commit 9319f453. Now, you can do "make defconfig all" or "make %_defconfig all" in Linux too. This commit updates some scripts to fill the code-diff between Linux and U-Boot. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This commit was imported from Linux Kernel: commit a86fe353 written by me. W=... provides extra gcc checks. Having such code in scripts/Makefile.build results in the same flags being added to KBUILD_CFLAGS multiple times becuase scripts/Makefile.build is invoked every time Kbuild descends into the subdirectories. Since the top Makefile is already too cluttered, this commit moves all of extra gcc check stuff to a new file scripts/Makefile.extrawarn, which is included from the top Makefile. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
The following configs are not defined at all: - CONFIG_INCA_IP_SWITCH - CONFIG_PBL2800_ETHER - CONFIG_PHY_ICPLUS Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
In Python, sys.exit() function can also take an object other than an integer. If an integer is given to the argument, Python exits with the return code of it. If a non-integer argument is given, Python outputs it to stderr and exits with the return code of 1. That means, print >> sys.stderr, "Blah Blah" sys.exit(1) is equivalent to sys.exit("Blah Blah") The latter is a useful shorthand. Note: Some error messages in Buildman and Patman were output to stdout. But they should go to stderr. They are also fixed by this commit. This is a nice side effect. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 21 8月, 2014 7 次提交
-
-
-
由 Valentin Longchamp 提交于
There is the requirement on the chassis's backplane that when the clocks have been enabled, they then should not disappear. Resetting the Zarlink clocking chips at unit reset violates this requirement because the backplane clocks are not supplied during the reset time. To avoid this side effect, both the Zarlink clocking chips are reset only at power up. Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com>
-
由 York Sun 提交于
Board specific README file should be moved to board folder. Signed-off-by: NYork Sun <yorksun@freescale.com>
-
由 Shaohui Xie 提交于
XFI is supported on T4QDS-XFI board, which removed slot3, and four LANEs of serdes2 are routed to a SFP+ cages, which to house fiber cable or direct attach cable(copper), the copper cable is used to emulate the 10GBASE-KR scenario. So, for XFI usage, there are two scenarios, one will use fiber cable, another will use copper cable. For fiber cable, there is NO PHY, while for copper cable, we need to use internal PHY which exist in Serdes to do auto-negotiation and link training, which implemented in kernel. We use hwconfig to define cable type for XFI, and fixup dtb based on the cable type. For copper cable, set below env in hwconfig: fsl_10gkr_copper:<10g_mac_name> the <10g_mac_name> can be fm1_10g1, fm1_10g2, fm2_10g1, fm2_10g2. The four <10g_mac_name>s do not have to be coexist in hwconfig. For XFI ports, if a given 10G port will use the copper cable for 10GBASE-KR, set the <10g_mac_name> of the port in hwconfig, otherwise, fiber cable will be assumed to be used for the port. For ex. if four XFI ports will both use copper cable, the hwconfig should contain: fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm2_10g1,fm2_10g2 For fiber cable: 1. give PHY address to a XFI port, otherwise, the XFI ports will not be available in U-boot, there is no PHY physically for XFI when using fiber cable, this is just to make U-boot happy and we can use the XFI ports in U-boot. 2. fixup dtb to use fixed-link in case of fiber cable which has no PHY. Kernel requests that a MAC must have a PHY or fixed-link. When using XFI protocol, the MAC 9/10 on FM1 should init as 10G interface. Change serdes 2 protocol 56 to 55 which has same feature as 56 since 56 is not valid any longer. Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Valentin Longchamp 提交于
When u-boot initializes the RAM (early in boot) it looks for the "pram" env variable to know which is area it cannot use. If the "pram" env variable is not found, the default CONFIG_PRAM value is used. This value used to be 0 (no protection at all). This patch sets it to a value that covers PHRAM and PNVRAM that must be protected in our case. Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Vijay Rai 提交于
This Patch updates error print for QE which should be easily understood Signed-off-by: NVijay Rai <vijay.rai@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Shaveta Leekha 提交于
If hwconfig does not contains "en_cpc" then by default all cpcs are enabled If this config is defined then only those individual cpcs which are defined in the subargument of "en_cpc" will be enabled e.g en_cpc:cpc1,cpc2; (this will enable cpc1 and cpc2) or en_cpc:cpc2; (this enables just cpc2) Signed-off-by: NShaveta Leekha <shaveta@freescale.com> Signed-off-by: NSandeep Singh <Sandeep@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 20 8月, 2014 4 次提交
-
-
由 Lukasz Majewski 提交于
This commit adds new test for UMS USB gadget to u-boot mainline tree. It is similar in operation to the one already available in test/dfu directory. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Acked-by: NStephen Warren <swarren@nvidia.com>
-
由 Lukasz Majewski 提交于
By mistake I've forgotten to add the SPDX license tags for the DFU testing scripts. This commit fixes that and also provides some other relevant information. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Acked-by: NStephen Warren <swarren@nvidia.com>
-
由 Lukasz Majewski 提交于
It is now possible to pass to the dfu_gadget_test_init.sh script the sizes of files to be generated. This feature is required by UMS tests which reuse this code. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Acked-by: NStephen Warren <swarren@nvidia.com>
-
由 Lukasz Majewski 提交于
It is necessary to provide the same Vendor and Product IDs as the one in the original Linux kernel code. Without this change the USB mass storage gadget is not working with Windows7. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Acked-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 13 8月, 2014 5 次提交
-
-
由 Simon Glass 提交于
Older versions of git (e.g. Ubuntu 10.04) do not support this flag. By default they do not decorate. So only enable this flag when supported. Suggested-by: NTom Rini <trini@ti.com> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move the code that builds a 'git log' command into a function so we can more easily adjust it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
It is useful to be able to build only some of the commits in a branch. Add support for the -c option to allow this. It was previously parsed by buildman but not implemented. Suggested-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NYork Sun <yorksun@freescale.com>
-
由 Simon Glass 提交于
Currently buildman allows a list of boards to build to be specified on the command line. The list can include specific board names, architecture, SOC and so on. At present the list of boards is dealt with in an 'OR' fashion, and there is no way to specify something like 'arm & freescale', meaning boards with ARM architecture but only those made by Freescale. This would exclude the PowerPC boards made by Freescale. Support an '&' operator on the command line to permit this. Ensure that arguments can be specified in a single string to permit easy shell quoting. Suggested-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NYork Sun <yorksun@freescale.com>
-
由 Simon Glass 提交于
The current README is a bit sparse in this area, so add a few more examples. Suggested-by: NTom Rini <trini@ti.com> Signed-off-by: NSimon Glass <sjg@chromium.org>
-