We have a number of platforms that are a combination of a carrier board
and System-on-Module (SoM) that in turn allows for the board to have
different SoCs on it.  In some cases, this is handled via board-specific
Kconfig options.  In other cases we make use of
CONFIG_SYS_EXTRA_OPTIONS.  This latter case however can lead to invalid
configurations as we will not in turn get options that in Kconfig are
selected by or depend on that setting.

To resolve this, make the SoC option a choice in Kconfig and make boards
depend on what they can support.  This change opens us up for further
clean-ups in the cases where a single CONFIG_TARGET_xxx can support
different SoCs and today they do not, or do not cleanly do so.
Reported-by: NMatt Porter <mporter@konsulko.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Soeren Moch <smoch@web.de>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Andreas Geisreiter <ageisreiter@dh-electronics.de>
Cc: Ludwig Zenz <lzenz@dh-electronics.de>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Akshay Bhat <akshaybhat@timesys.com>
Cc: Ken Lin <Ken.Lin@advantech.com.tw>
Cc: Ian Ray <ian.ray@ge.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Cc: Simone CIANNI <simone.cianni@bticino.it>
Cc: Adam Ford <aford173@gmail.com>
Cc: Marcin Niestroj <m.niestroj@grinn-global.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Jason Liu <jason.hui.liu@nxp.com>
Cc: Ye Li <ye.li@nxp.com>
Cc: Eric Nelson <eric@nelint.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Parthiban Nallathambi <parthiban@linumiz.com>
Cc: Marek Vasut <marex@denx.de>
Cc: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Niel Fourie <lusus@denx.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Richard Hu <richard.hu@technexion.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Arkadiusz Karas <arkadiusz.karas@somlabs.com>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org>
Cc: Silvio Fricke <open-source@softing.de>
Tested-by: Matt Porter <mporter@konsulko.com> [colibri_imx6]
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NMarcin Niestroj <m.niestroj@grinn-global.com>

- Remove pinmux definition from pico-imx6ul.c
- Enable NET_RANDOM_ETHADDR for temporary solution, because micrel_ksz8xxx
driver does not support DM_ETH yet, so cannot read MAC address directly.

Before enable DM_ETH:
  Net:   FEC [PRIME]

After enable DM_ETH:
  Net:
  Warning: using random MAC address - ca:3f:43:8f:67:d4
  eth1: ethernet@20b4000

Here is the test commands:
  => dhcp
  BOOTP broadcast 1
  DHCP client bound to address 10.88.88.94 (139 ms)
  *** ERROR: `serverip' not set
  Cannot autoload with TFTPGET
  => ping 8.8.8.8
  Using ethernet@20b4000 device
  host 8.8.8.8 is alive
Signed-off-by: NWig Cheng <wig.cheng@technexion.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>

It's due to the warning messages issue after compiled:

  ===================== WARNING ======================
  This board does not use CONFIG_DM_VIDEO Please update
  the board to use CONFIG_DM_VIDEO before the v2019.07 release.
  Failure to update by the deadline may result in board removal.
  See doc/driver-model/migration.rst for more info.
  ====================================================

Enable DM_VIDEO can fix it on the stage of compilation.
Signed-off-by: NWig Cheng <wig.cheng@technexion.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>

Here is the test commands:

  => ums 0 mmc 0
  UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x710000
Signed-off-by: NWig Cheng <wig.cheng@technexion.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>

Add initial infrastructure for Xen para-virtualized block device.
This includes compile-time configuration and the skeleton for
the future driver implementation.
Add new class UCLASS_PVBLOCK which is going to be a parent for
virtual block devices.
Add new interface type IF_TYPE_PVBLOCK.

Implement basic driver setup by reading XenStore configuration.
Signed-off-by: NAndrii Anisov <andrii_anisov@epam.com>
Signed-off-by: NAnastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Signed-off-by: NOleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>

Add support for Xen para-virtualized serial driver. This
driver fully supports serial console for the virtual machine.

Please note that as the driver is initialized late, so no banner
nor memory size is visible.
Signed-off-by: NPeng Fan <peng.fan@nxp.com>
Signed-off-by: NOleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: NAnastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Introduce a minimal Xen guest board running as a virtual
machine under Xen Project's hypervisor [1], [2].

Part of the code is ported from Xen mini-os and also uses
work initially done by different authors from NXP: please see
relevant files for their copyrights.

[1] https://xenbits.xen.org
[2] https://wiki.xenproject.org/Signed-off-by: NAndrii Anisov <andrii_anisov@epam.com>
Signed-off-by: NOleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: NAnastasiia Lukianenko <anastasiia_lukianenko@epam.com>

Switch DTB provider form OF_EMBED to OF_SEPARATE
to avoid the compile warning message:

  ==================== WARNING ======================
  CONFIG_OF_EMBED is enabled. This option should only
  be used for debugging purposes. Please use
  CONFIG_OF_SEPARATE for boards in mainline.
  See doc/README.fdt-control for more info.
  ====================================================
Signed-off-by: NChia-Wei, Wang <chiawei_wang@aspeedtech.com>

Move the BOOTCOMMAND definition from the board inclusion
header to the default configuration file.
Signed-off-by: NChia-Wei, Wang <chiawei_wang@aspeedtech.com>

Include both PDK2 and DRC02 DTs in the DHCOM fitImage .its and implement
support in SPL to select the correct configuration entry for U-Boot by
using the machine compatible string from SPL DT.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>

This patch enables the support of FMC2 EBI.
Signed-off-by: NChristophe Kerello <christophe.kerello@st.com>
Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>

Add initial A72 defconfig support.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>

Add initial R5 defconfig support
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>

Because of space constraints, create a new USB defconfig for R5 to
faciliate booting from USB mass storage devices
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>

Because of space constraints, create a new USB defconfig for R5 to
faciliate booting in USB peripheral (DFU) bootmode
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>

Enable configs to facilitate booting from USB Mass Storage devices
as well as USB peripheral boot
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>

This commit completes the migrations for DM_ETH and DM_USB. The board
is now consistent with omap3_beagle and other remaining OMAP3 boards.

Cc: Tom Rini <trini@konsulko.com>
Cc: Adam Ford <aford173@gmail.com>
Signed-off-by: NDerald D. Woods <woods.technical@gmail.com>

Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_SYS_MMC_ENV_DEV
   CONFIG_SYS_MMC_ENV_PART

Note that with this conversion we now have consistent behavior with
respect to ensuring that we have always selected the correct MMC
device and hardware partition.
Signed-off-by: NTom Rini <trini@konsulko.com>

Add Python scripts to test 'ls' and 'load' commands. The scripts
generate a SquashFS image and clean the directory after the assertions,
or if an exception is raised.
Signed-off-by: NJoao Marcos Costa <joaomarcos.costa@bootlin.com>

Add various fixes and improvements to this command that were missed in
the original version. Unfortunately I forgot to send v2.

- Fix Kconfig name
- Use a separate variable for the remaining search length
- Correct a minor bug
- Move into a separate test suite
- Add -q flag to the 'quiet' test to test operation when console is enabled
- Enable the feature for sandbox
Signed-off-by: NSimon Glass <sjg@chromium.org>

Update the MikroTik CRS305-1G-4S flash layout to support redundant UBI
partitions.
Additionally enable the UBI commands in crs305-1g-4s_defconfig.
Signed-off-by: NLuka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: NStefan Roese <sr@denx.de>

MikroTik CRS328-4C-20S-4S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.

This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit board variant has a
bigger Macronix flash.

Add basic U-Boot, UART and SPI flash support.
Signed-off-by: NLuka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: NStefan Roese <sr@denx.de>

MikroTik CRS326-24G-2S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.

This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit board variant has a
bigger Macronix flash.

Add basic U-Boot, UART and SPI flash support.
Signed-off-by: NLuka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: NStefan Roese <sr@denx.de>

MikroTik CRS305-1G-4S Bit board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.

The Bit board variant is added, which has a bigger Macronix flash.

Add basic U-Boot, UART and Winbond SPI flash support.
Signed-off-by: NLuka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: NStefan Roese <sr@denx.de>

This commit moves CONFIG_PREBOOT="usb start" to common/KConfig
for all boards also declaring USB_KEYBOARD.

Besides simplifying defconfig files, this also enables support for
board-specific CONFIG_PREBOOT for sunxi boards:
commit 37304aaf ("Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to
Kconfig") intended to support CONFIG_PREBOOT, but
include/configs/sunxi-common.h hardcodes preboot as part of internally
defined CONSOLE_STDIN_SETTINGS, silently ignoring any board-specific
CONFIG_PREBOOT.
Signed-off-by: NJonas Smedegaard <dr@jones.dk>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Series-Cc: Jagan Teki <jagan@amarulasolutions.com>
Series-Cc: Lukasz Majewski <lukma@denx.de>
Series-Cc: Andre Przywara <andre.przywara@arm.com>

Add necessary defconfig and Kconfig entries to enable SiFive SoC's
reset driver so as to utilise U-Boot's reset framework.
Signed-off-by: NSagar Shrikant Kadam <sagar.kadam@sifive.com>
Reviewed-by: NPragnesh Patel <Pragnesh.patel@sifive.com>
Reviewed-by: NBin Meng <bin.meng@windriver.com>
Tested-by: NBin Meng <bin.meng@windriver.com>

Migration to DM_VIDEO changed the output device name (in stout, stderr)
from 'vga' to 'vidconsole'. This also was adapted in the default environment.
However, existing user defined environments still use 'vga'. Enable this
workaround to map the 'vga' name to 'vidconsole'. So we get HDMI video
output also with existing legacy environments.
Signed-off-by: NSoeren Moch <smoch@web.de>

This patch enables the following options for the Octeon EBB7304 EVB:

- PCI & DM_PCI
- DM_SPI_FLASH & SPI flash device support
- SPI & Octeon SPI driver
- GPIO cmd support
- I2C cmd support
Signed-off-by: NStefan Roese <sr@denx.de>

Before enable _DM_ETH:
    Net:   FEC [PRIME]

After enable DM_ETH:
    Net:   eth0: ethernet@2188000

Here is the test commands:
    => dhcp
    BOOTP broadcast 1
    DHCP client bound to address 10.88.88.152 (146 ms)
    *** ERROR: `serverip' not set
    Cannot autoload with TFTPGET
    => ping 8.8.8.8
    Using ethernet@2188000 device
    host 8.8.8.8 is alive
Signed-off-by: NWig Cheng <wig.cheng@technexion.com>

Enable CONFIG_SPL_DM_SPI_FLASH to be able to boot from SPI NOR,
modify the offset of U-boot proper in the SPI NOR, so the
difference in offset matches between SPL and U-boot matches that of
the SD Card, allowing u-boot-with-spl.imx to also be copied to SPI
NOR at an offset of 0x400. Update the README to reflect this
change.
Signed-off-by: NNiel Fourie <lusus@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

MYS-6ULX is single board computer (SBC) comes with eMMC or NAND based
on imx6ULL SoC from NXP and provision for expansion board. This
commit adds support only for SBC with NAND.

CPU:   Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 45C
Reset cause: WDOG
Model: MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND
Board: MYiR MYS-6ULX 6ULL Single Board Computer
DRAM:  256 MiB
NAND:  256 MiB
MMC:   FSL_SDHC: 0
In:    serial@2020000
Out:   serial@2020000
Err:   serial@2020000
Net:   FEC0

Working:
 - Eth0
 - MMC/SD
 - NAND
 - UART 1
 - USB host
Signed-off-by: NParthiban Nallathambi <parthiban@linumiz.com>

Enable these extra PCI ethernet devices, so they can be tested in CI.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Switch r2dplus to DM and DT probing for serial and clock.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

The ethernet on r2dplus is on PCI bus, enumerate the PCI early
to get the ethernet operational.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Enable DM ethernet support for the board, now that rtl8139 is converted.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

As both MMC and GPIO driver now supports OF_PLATDATA, enable it in
defconfig in order to reduce the SPL footprint. After applying this
setting the SPL reduction is 5 KB, which partially compensates the
increment due to DM.
Signed-off-by: NWalter Lozano <walter.lozano@collabora.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

The K210 has only 8 MiB RAM thereof 2 MiB reserved for AI.

Allow only 1 MiB for the stack.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Add test for the erase command tested on ENV in EXT4.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>

Add support of environment location with the new env command:
'env select' and 'env load'

The ENV backend is selected by priority order
- 0 = "nowhere" (default at boot)
- 1 = "EXT4"

To test EXT4 env support, this backend is selected by name:
> env select EXT4
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>