- 19 8月, 2013 4 次提交
-
-
由 Dirk Eibach 提交于
Up to this point some PHY initialization was done from the FPGA and some from u-boot. From now all initialization is done from u-boot. To keep this maintainable a PHY setup machine was implemented that can execute commands from initialization arrays. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Dirk Eibach 提交于
Add a new iocon flavor with a second communiction port per channel. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Dirk Eibach 提交于
Add a new iocon flavor with fiber instead of copper connectivity. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: NStefan Roese <sr@denx.de>
-
git://88.191.163.10/u-boot-arm由 Tom Rini 提交于
Fixup an easy conflict over adding the clk_get prototype and USB_OTG defines for am33xx having moved. Conflicts: arch/arm/include/asm/arch-am33xx/hardware.h Signed-off-by: NTom Rini <trini@ti.com>
-
- 18 8月, 2013 1 次提交
-
-
由 Albert ARIBAUD 提交于
-
- 17 8月, 2013 7 次提交
-
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@ingics.com> Reviewed-by: NThierry Reding <thierry.reding@gmail.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 York Sun 提交于
Commit 669dfc2e adds libfdt_env.h to HOSTCPPFLAGS. It causes stdio.h to be included before _GNU_SOURCE is defined in C files. On some old hosts some prototypes are protected by #ifdef __USE_GNU, which is set when _GNU_SOURCE is defined. Signed-off-by: NYork Sun <yorksun@freescale.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The timestamp is shown in fit_print_contents() but for some reason not in fit_image_print(). This seems to be an oversight, since it is the latter which is used by bootm. Add timestamp printing in this case. (There is code duplication in these two function, for looking at in a future patch). Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Paul B. Henson 提交于
This function is only defined if CONFIG_SILENT_CONSOLE is set and CONFIG_SILENT_U_BOOT_ONLY is not set, the call to it should be based on the same conditions. Signed-off-by: NPaul B. Henson <henson@acm.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present the console for linux is silent if the U-Boot console is silent, unless CONFIG_SILENT_U_BOOT_ONLY is set. I wonder if a better way would be to have an environment variable to control this? Then we can control the verbosity from scripts, and set the variable to 'no' for those boards that want Linux to boot with console output. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Taras Kondratiuk 提交于
If image name is longer than 32 bytes, then it will be truncated. This will remove '\0' at the end of the line, so printf will go out of string limit. Signed-off-by: NTaras Kondratiuk <taras@ti.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Angus Ainslie 提交于
This is a trivial patch that just enables xmodem downloads using the existing ymodem framework. Signed-off-by: NAngus Ainslie <angus@akkea.ca>
-
- 16 8月, 2013 20 次提交
-
-
由 TENART Antoine 提交于
Signed-off-by: NAntoine Tenart <atenart@adeneo-embedded.com> [trini: Change to SPDX, fix a few compiler warnings, adapt to CONFIG_OMAP_COMMON] Signed-off-by: NTom Rini <trini@ti.com>
-
由 TENART Antoine 提交于
Signed-off-by: NAntoine Tenart <atenart@adeneo-embedded.com> [trini: Fix warnings about vtp things in emif4.c, adapt AM43XX] Signed-off-by: NTom Rini <trini@ti.com>
-
由 TENART Antoine 提交于
Rename some CONFIG_TI814X to a more generic CONFIG_TI81XX Signed-off-by: NAntoine Tenart <atenart@adeneo-embedded.com> [trini: Adapt for CONFIG_OMAP_COMMON changes, AM43XX] Signed-off-by: NTom Rini <trini@ti.com>
-
由 Heiko Schocher 提交于
add the am1808 based ipam390 board from Barix. - 128MByte, DDR2, synchronous RAM 16bit databus to SDRAM interface - 128MByte, NAND Flash, 8bit databus to the NANDFlash Interface - Ethernet PHY Micrel KSZ8051R via RMII - Console on UART 0 - booting fron nand flash - spl falcon bootmode Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
-
由 Heiko Schocher 提交于
in arch_cpu_init() uart2 is fix enabled, without reference the setting from CONFIG_SYS_NS16550_COM1. Use the setting from CONFIG_SYS_NS16550_COM1 for enabling the console. Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Rini <tom.rini@gmail.com> Cc: Christian Riesch <christian.riesch@omicron.at>
-
由 Heiko Schocher 提交于
In case CONFIG_BOOTSTAGE is not defined, call from bootstage_mark_name() show_boot_progress(), so get more BOOTSTAGE_ID* ids in show_boot_progress() if CONFIG_BOOTSTAGE is not defined. Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
-
由 Tom Rini 提交于
Add the generic "poke a GPIO" command, with the GPIO related defines. Acked-by: NDan Murphy <dmurphy@ti.com> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
Add the generic "poke the SPI bus" command, with the SPI related defines. Acked-by: NDan Murphy <dmurphy@ti.com> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
Update omap5_common.h to use ti_armv7_common.h, and in turn update dra7xx_evm.h and omap5_uevm.h slightly. The biggest changes here are that IP blocks which exist on the platform, and had clocks enabled, now have the drivers being built as well. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
We create two new files, include/configs/ti_armv7_common.h for all of the common IP blocks and related features / commands we share in virtually all of our platforms. We then create include/configs/ti_am335x_common.h for everything common to the am335x SoC leaving just the board specific parts to include/configs/ti_am335x_common.h. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
Bring in the 'boot_fdt' environment variable that i.MX boards use to try and load a device tree when booting. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
With device trees, boards do not always set CONFIG_MACH_TYPE now, so we must not rely on this define being set. The kernel uses ~0 to see if we have a valid machine number or not, so set that as the default, invalid machine, id and only fix if CONFIG_MACH_TYPE is set. Acked-by: NDan Murphy <dmurphy@ti.com> Tested-by: NHeiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
We defined PHYS_DRAM_1 to 0x80000000 (start of DRAM) and then used this for CONFIG_SYS_SDRAM_BASE. But then we kept on referencing PHYS_DRAM_1 in other places. Change to directly setting CONFIG_SYS_DRAM_BASE and then using that name in code. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
Acked-by: NDan Murphy <dmurphy@ti.com> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Javier Martinez Canillas 提交于
IGEP boards now have Device Tree support in the mainline kernel. To boot an IGEP board using a DT, a uEnv.txt plain text file could be used to define a custom uenvcmd that will be run by the default boot command. It is more convenient to change the default boot command to allow loading a FDT if it is stored in the boot dir of the rootfs uSD/MMC partition. If no FDT is found then the defaul command tries to boot a zImage without a DT using legacy boot. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
-
由 Enric Balletbo i Serra 提交于
Able to load the kernel from some form of ext[234] or FAT. Also, with v3.9 and later of the Linux Kernel, uImage isn't builtable anymore by default, so we should switch to use the bootz command. Signed-off-by: NEnric Balletbo i Serra <eballetbo@gmail.com>
-
由 Taras Kondratiuk 提交于
Commit "OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon" (f4010734) changed sequence to set final DDR PHY config register value at the beginning. Looks like it was made by mistake and should be reverted. Signed-off-by: NTaras Kondratiuk <taras@ti.com>
-
由 Masahiro Yamada 提交于
Since Commit 7f5eef93 removed OMAP2420H4 support, arm1136/omap24xx has not been used at all. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 15 8月, 2013 8 次提交
-
-
由 Naumann Andreas 提交于
ARM: omap3: Implement dpll5 (HSUSB clk) workaround for OMAP36xx/AM/DM37xx according to errata sprz318e. In chapter 'Advisory 2.1 USB Host Clock Drift Causes USB Spec Non-compliance in Certain Configurations' of the TI Errata it is recommended to use certain div/mult values for the DPLL5 clock setup. So far u-boot used the old 34xx values, so I added the errata recommended values specificly for 36xx init only. Also, the FSEL registers exist no longer, so removed them from init. Tested this on a AM3703 board with 19.2MHz oscillator, which previously couldnt lock the dpll5 (kernel complained). As a consequence the EHCI USB port wasnt usable in U-Boot and kernel. With this patch, kernel panics disappear and USB working fine in u-boot and kernel. Signed-off-by: NAndreas Naumann <anaumann@ultratronik.de> [trini: Add extern to <asm/arch-omap3/clock.h> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Ash Charles 提交于
Gumstix uses 200Mhz RAM on revision 1, 2 & 3 COMs, so use 200MHz timings rather than 165MHz. Based on 6cf8bf44b1f8550e12f7f2a16e01890e5de8443d Signed-off-by: NAsh Charles <ashcharles@gmail.com>
-
由 Steve Sakoman 提交于
Signed-off-by: NAsh Charles <ashcharles@gmail.com>
-
由 Enric Balletbo i Serra 提交于
As config was originally based on am335x_evm.h we have also some duplicate / unnused #defines. Commit 15191c91 removed these #defines on various AM335x boards but not for IGEP COM AQUILA. This patch simply removes them for this board. Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: NJavier Martinez Canillas <javier@dowhile0.org>
-
由 Enric Balletbo i Serra 提交于
Add to the default environment the possibily to boot from NAND using a ubi rootfs. Also the partition scheme is set as follows: Start Size SPL : 0x00000000 0x00080000 (512KiB) U-Boot : 0x00080000 0x00100000 (1MiB) U-Boot Env : 0x00180000 0x00020000 (128KiB) File System : 0x001C0000 - The ubiboot script gets the kernel and the dtb file from the boot directory of the File System. Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: NJavier Martinez Canillas <javier@dowhile0.org>
-
由 Enric Balletbo i Serra 提交于
We will not use CYGNUS names for any IGEP COM based on AM335x processor, so, to avoid confusion, remove from headers. Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: NJavier Martinez Canillas <javier@dowhile0.org>
-
由 Enric Balletbò i Serra 提交于
Now, the default kernel to boot the IGEP COM AQUILA is device tree based. As old kernel is deprecated we should adapt the boot commands to use DTB files. Also, with v3.9 and later of the Linux Kernel, uImage isn't builtable anymore by default, so we should switch to use the bootz command. Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: NJavier Martinez Canillas <javier@dowhile0.org>
-
由 Enric Balletbo i Serra 提交于
After commit: 79cd2f81 config_cmd_default.h: Remove CONFIG_CMD_MEMTEST It's not necessary to undef the CONFIG_CMD_MEMTEST, so we can remove it from configuration file. Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: NJavier Martinez Canillas <javier@dowhile0.org>
-