- 08 12月, 2014 13 次提交
-
-
由 Masahiro Yamada 提交于
The CPU directory of this board is arch/powerpc/cpu/mpc5xxx. Without the CONFIG_SPL_START_S_PATH and CONFIG_SPL_LDSCRIPT defines, the same start.o and u-boot-spl.lds are selected by default. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefan Roese <sr@denx.de> Acked-by: NStefan Roese <sr@denx.de>
-
由 Masahiro Yamada 提交于
The CPU directory of this board is arch/powerpc/cpu/ppc4xx. Without the CONFIG_SPL_START_S_PATH and CONFIG_SPL_LDSCRIPT defines, the same start.o and u-boot-spl.lds are selected by default. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: NStefan Roese <sr@denx.de>
-
由 Masahiro Yamada 提交于
This board sprinkles #ifdef(CONFIG_HERMES) over various global files such as include/common.h, common/board_r.c, common/cmd_bdinfo.c. Let's zap such an ill-behaved board. It has not been converted to generic board yet and mpc8xx is old enough. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: NWolfgang Denk <wd@denx.de>
-
由 Hector Palacios 提交于
Fuse drivers, like the mxs_ocotp.c, may return negative error codes but the commands are only allowed to return CMD_RET_* enum values to the shell, otherwise the following error appears: "exit not allowed from main input shell." Signed-off-by: NHector Palacios <hector.palacios@digi.com> Reviewed-by: NBenoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
-
由 Stephen Warren 提交于
Enable ENV_IS_IN_FAT so that the environment can be stored persistently. It's stored in the FAT partition that the RPi firmware requires. On most RPis, this is on the SD card (which must be present in order for the system to boot). On the CM this is on the built-in eMMC device. Since we now have a persistent environment, there's no need to load uEnv.txt at boot; we only did that to work around the lack of persistent environment. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Reviewed-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
The U-Boot port runs on a variety of RPi models, not just the B. So, rename the port to something slightly more generic. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Reviewed-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
Detect the board revision early during boot, and print the decoded model name. Eventually, this information can be used for tasks such as: - Allowing/preventing USB device mode; some models have a USB device on- board so only host mode makes sense. Others connect the SoC directly to the USB connector, so device-mode might make sense. - The on-board USB hub/Ethernet requires different GPIOs to enable it, although luckily the default appears to be fine so far. - The compute module contains an on-board eMMC device, so we could store the environment there. Other models use an SD card and so don't support saving the environment (unless we store it in a file on the FAT boot partition...) Set $fdtfile based on this information. At present, the mainline Linux kernel doesn't contain a separate DTB for most models, but I hope that will change soon. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Reviewed-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
由 Guillaume GARDET 提交于
In SPL MMC, boot modes are exclusive. So, if MMCSD_MODE_RAW fails, the board hangs. This patch allows to try MMCSD_MODE_FS then, if available. It has been tested on a pandaboard (rev. A3). Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
-
由 Heiko Schocher 提交于
Add me for UBI custodian. Signed-off-by: NHeiko Schocher <hs@denx.de> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Wu, Josh 提交于
Currenly when CONFIG_BOOTP_SERVERIP is defined, the SERVERIP is not changed when receive the BOOTP packet. But BOOTFILE is changed via BOOTP packet. As we will load the BOOTFILE from SERVERIP, if the BOOTFILE is modified by bootp packet but SERVERIP is not, that is not make sense. This patch make SERVERIP and BOOTFILE be consistent. If we define the CONFIG_BOOTP_SERVERIP, then SERVERIP and BOOTFILE will not changed by BOOTP packet. Only IP address is changed. Signed-off-by: NJosh Wu <josh.wu@atmel.com>
-
由 Daniel Schwierzeck 提交于
get_maintainer.pl always fails with following message: ./scripts/get_maintainer.pl: The current directory does not appear to be a linux kernel source tree. This was caused by commit: commit 548b310c Author: Masahiro Yamada <yamada.m@jp.panasonic.com> Date: Thu Oct 30 15:50:15 2014 +0900 Remove the CREDITS file This file is not maintained these days. We use MAINTAINERS for the maintainership of the supported boards. For dead boards, we have some clues in doc/README.scrapyard and also imperishable history in git-log. Remove CREDITS from source tree detection to fix this. Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Commit 709ea543 made a subtle change to the way the U-Boot API jump table is set up. So at present putc(), getc(), tstc() and puts() do not work correctly from functions that use the U-Boot API. Previously these were set to the stdio functions, but these now take a parameter specifying which stdio device to use. Instead, we should change them to use the global functions which do not have a parameter. This is a slight change in behaviour. The functions will now output to all selected stdio devices - for example putc() will output a character to all devices selected by stdout. However in most cases there is only one, and it isn't necessarily incorrect behaviour anyway. The API version is not changed since it is compatible with what was there before. Reported-by: NMartin Dorwig <dorwig@tektronik.com> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Paul Kocialkowski 提交于
Raw images of U-Boot can be stored inside MMC partitions, so it makes sense to read the partition table, looking for a partition number instead of using a fixed sector address. Signed-off-by: NPaul Kocialkowski <contact@paulk.fr> Reviewed-by: NTom Rini <trini@ti.com> [trini: Only add mmc_load_image_raw_partition() when CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to avoid warning, add missing conversion in spl_mmc_load_image()] Signed-off-by: NTom Rini <trini@ti.com>
-
- 05 12月, 2014 1 次提交
-
-
由 Paul Kocialkowski 提交于
CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION ought to be called CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to keep it consistent with other config options such as: CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR. In addition, it is not related to raw mode booting but to fs mode instead. Signed-off-by: NPaul Kocialkowski <contact@paulk.fr> Reviewed-by: NTom Rini <trini@ti.com>
-
- 04 12月, 2014 2 次提交
-
-
-
由 Tom Rini 提交于
It has been found that this change breaks the case of an appended device tree file, so for the problem in question some other solution must be found. This reverts commit c6150aaf. Reported-by: NBill Pringlemeir <bpringlemeir@nbsps.com> Reported-by: NPantelis Antoniou <panto@antoniou-consulting.com> Confirmed-by: NBill Pringlemeir <bpringlemeir@nbsps.com> Signed-off-by: NTom Rini <trini@ti.com>
-
- 02 12月, 2014 3 次提交
-
-
-
-
由 Tom Rini 提交于
The changes to introduce loff_t into filesize means that we need to do 64bit math on 32bit platforms. Make sure we use the right wrappers for these operations. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Suriyan Ramasami <suriyan.r@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Rini <trini@ti.com> Tested-by: NPierre Aubert <p.aubert@staubli.com>
-
- 01 12月, 2014 1 次提交
-
-
由 Hans de Goede 提交于
After commit 933cdbb4: "fdt: Try to use fdt_address_cells()/fdt_size_cells()" I noticed that allwinner boards would no longer boot. Switching to fdt_address_cells / fdt_size_cells changes the result from bytes to 32 bit words, so when we increment pointers into the blob, we must do so by 32 bit words now. This commit makes allwinner boards boot again. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Tested-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org> Tested-by: NStefan Roese <sr@denx.de> Tested-by: NVince Hsu <vinceh@nvidia.com>
-
- 28 11月, 2014 9 次提交
-
-
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
If CONFIG_OF_CONTROL is defined, search device tree nodes that are compatible with "panasonic,uniphier-ehci" and take the base address from their "reg" property. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Marek Vasut <marex@denx.de>
-
由 Masahiro Yamada 提交于
This commit implements the ofdata_to_platdata handler for the UniPhier serial driver and adds serial device nodes to the device tree sources. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This commit adds basic device tree sources for UniPhier SoCs/boards. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled. It includes <asm/gpio.h> and then <asm/gpio.h> includes <asm/arch/gpio.h>. Consequently, all the SoCs that enable CONFIG_OF_CONTROL must have <asm/arch/gpio.h> even if they do not support GPIO. In the first place, GPIO has nothing to do with OF_CONTROL. It is wrong that lib/fdtdec.c includes GPIO functions; it should be split into two files, FDT-common things and GPIO things. It is, however, a pretty big work to fix that correctly. This is a compromised commit to add a dummy <asm/arch/gpio.h> to support OF_CONTROL for UniPhier platform. This dummy header will be removed after FDT-GPIO stuff is fixed correctly. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
The fdt_path_offset() checks an alias too. fdtdec_get_alias_node(blob, "foo") is equivalent to fdt_path_offset(blob, "foo"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 27 11月, 2014 11 次提交
-
-
-
由 Daniel Schwierzeck 提交于
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Daniel Schwierzeck 提交于
The initramfs is currently only relocated if the user calls the bootm ramdisk subcommand. If bootm should be used without subcommands, the arch-specific bootm code needs to implement the relocation. Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Daniel Schwierzeck 提交于
After all MIPS boards are switched to generic-board, the MIPS specific board.c can be removed. Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Daniel Schwierzeck 提交于
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: NStefan Roese <sr@denx.de>
-
由 Daniel Schwierzeck 提交于
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Daniel Schwierzeck 提交于
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Daniel Schwierzeck 提交于
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Daniel Schwierzeck 提交于
To get correct stack walking and backtrace functionality in gdb, registers fp and ra should be initialized before calling board_init_f or board_init_r. Thus allocating stack space and zeroing it as it is currently done in board.c becomes obsolete. Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Marek Vasut 提交于
Merge struct s3c2410_nand and struct s3c2440_nand into one unified struct s3c24x0_nand. While at it, fix up and rename the functions to retrieve the NAND base address and fix up the s3c NAND driver to reflect this change. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Vladimir Zapolskiy <vz@mleia.com>
-
由 Simon Glass 提交于
We probably don't need to enable this option by default. It is useful to display only failure boards (not errors) and it is easy to add -e if it is required. Also update the docs. Signed-off-by: NSimon Glass <sjg@chromium.org> Reported-by: NAlbert Aribaud <albert.u.boot@aribaud.net>
-