- 19 2月, 2019 24 次提交
-
-
由 Peng Ma 提交于
remove SCSI and SCSI_AHCI configs for ls1043ardb due to no sata interface support. this changed is to fixed the ls1043ardb compile warning as fallows: ===================== WARNING ====================== This board does not use CONFIG_DM_SCSI. Please update the storage controller to use CONFIG_DM_SCSI before the v2019.07 release. Failure to update by the deadline may result in board removal.See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: NPeng Ma <peng.ma@nxp.com> [PK: reword the patch subject] Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Rajesh Bhagat 提交于
Moves CONFIG_LAYERSCAPE for all NXP Layerscape platforms. Signed-off-by: NRajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Rajesh Bhagat 提交于
Moves FSL_TZASC_400 and FSL_TZPC_BP147 configs to Kconfig for LS1088A and LS2088A platforms. Signed-off-by: NRajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Zhao Qiang 提交于
Due to the new layout of Layerscape series, move the QE firmware to address (512*4A00) in SD Card. Signed-off-by: NZhao Qiang <qiang.zhao@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Wen He 提交于
nand_bootcmd doest not exist, it should be support for nand auto boot up. Signed-off-by: NWen He <wen.he_1@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Pankaj Bansal 提交于
LX2160AQDS is a development board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: NWasim Khan <wasim.khan@nxp.com> Signed-off-by: NSriram Dash <sriram.dash@nxp.com> Signed-off-by: NPankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: NUdit Agarwal <udit.agarwal@nxp.com> [PK: Sqaush patch for "secure boot defconfig" & add maintainer] Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Priyanka Jain 提交于
Add init_func_vid() which calls adjust_vdd() This ensures adjust_vdd() is called via init_sequence_f[] Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Udit Agarwal 提交于
Adds esbc validate command for verification of MC and DPC firmware, along with secure boot defconfig. Also enable distro boot. Signed-off-by: NUdit Agarwal <udit.agarwal@nxp.com> Signed-off-by: NPeng Ma <peng.ma@nxp.com> [PK: squash "enable DM support for SATA patch" & add maintainer] Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Priyanka Jain 提交于
Add u-boot enviroments to support distro boot which scan boot.scr from external storage devices (e.g. SD/USB/SCSI disk) and execute autoboot script Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Meenakshi Aggarwal 提交于
Enable support for FAN controller EMC2305 for LX2160A RDB board. Signed-off-by: NSriram Dash <sriram.dash@nxp.com> Signed-off-by: NMeenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [PK: enable EMC2305 for lx2160rdb] Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Meenakshi Aggarwal 提交于
Add support for fan controller emc2305. Signed-off-by: NSriram Dash <sriram.dash@nxp.com> Signed-off-by: NMeenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Priyanka Jain 提交于
LX2160ARDB is an evaluation board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: NWasim Khan <wasim.khan@nxp.com> Signed-off-by: NYogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: NMeenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: NVabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: NSriram Dash <sriram.dash@nxp.com> Signed-off-by: NRajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: NPankit Garg <pankit.garg@nxp.com> Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: NPeng Ma <peng.ma@nxp.com> Signed-off-by: NChuanhua Han <chuanhua.han@nxp.com> Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com> [PK: Sqaush patches from Yinbo Zhu, Peng Ma, Chuanhua Han and re-arrange defconfig] Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Pankaj Bansal 提交于
some dpmacs in armv8a based freescale layerscape SOCs can be configured via both serdes(sgmii, xfi, xlaui etc) bits and via EC*_PMUX(rgmii) bits in RCW. e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits Now if a dpmac is enabled by serdes bits then it takes precedence over EC*_PMUX bits. i.e. in LX2160A if we select serdes protocol that configures dpmac17 as SGMII and set the EC1_PMUX as RGMII, then the dpmac is SGMII and not RGMII. Therefore, move the fsl_rgmii_init after fsl_serdes_init. in fsl_rgmii_init function of SOC, we will check if the dpmac is enabled or not? if it is (fsl_serdes_init has already enabled the dpmac), then don't enable it. Signed-off-by: NPankaj Bansal <pankaj.bansal@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Priyanka Jain 提交于
Add code to initial ethernet interface arrays with corresponding dpmac-id values in serdes_init function for LX2160A. Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Priyanka Jain 提交于
fsl_ddr_board_options is generally defined in board board's ddr.c, but some boards like lx2160ardb board does not need this function. Defining fsl_ddr_board_options as weak function to resolve compilation errors for such boards. Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com> [PK: Fix checkpatch warnings] Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Meenakshi Aggarwal 提交于
Flush L3 cache after uboot relocated to DDR. Signed-off-by: NMeenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: NUdit Kumar <udit.kumar@nxp.com> Reviewed-by: NStefan Roese <sr@denx.de> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Priyanka Jain 提交于
As per hardware documentation, CONFIG_SYS_FSL_PEBUF_BASE for lx2160a is 0x1c00000000 Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Jean-Jacques Hiblot 提交于
Enable CONFIG_DM_SCSI and CONFIG_BLK. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Jean-Jacques Hiblot 提交于
CONFIG_BLK can be safely enabled as DM_MMC and DM_USB are already enabled. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com> Tested-by: NVignesh R <vigneshr@ti.com>
-
由 Alexander Graf 提交于
Heinrich is going to take over maintainership of the efi_loader tree going forward. To ensure that I will still receive review mails at least, add me as reviewer with a stable email address. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Alexander Graf 提交于
Matthias Brugger agreed to take over maintainership from me for the Raspberry Pi tree. Add him to the MAINTAINERS file instead. Signed-off-by: NAlexander Graf <agraf@suse.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Hannes Schmelzer 提交于
The commit 1bac199e ("configs: Resync with savedefconfig") did remove ethernet driver from following boards defconfig: - brppt1_mmc - brppt1_nand - brppt1_spi With this commit we add ethernet and responsible phy support again. Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>
-
https://github.com/xypron2/u-boot由 Tom Rini 提交于
The patches fix multiple errors. Mentionable are: - EFI unit tests (bootefi selftest) can run on i386. - `make tests` executes the Unicode unit tests. The LoadImage patch is preparing for further rework to be delivered in v2019.07.
-
- 17 2月, 2019 5 次提交
-
-
git://git.denx.de/u-boot-video由 Tom Rini 提交于
- sunxi display DDC probe fallback - support 24bpp BMP files on 16bpp displays
-
-
由 Marek Vasut 提交于
The DT2FF register must be configured differently for HS400 mode and for HS200/SDR104 mode. Configure the DT2FF register according to the recommended datasheet settings for each mode. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
-
由 Marek Vasut 提交于
Set the HOST_MODE register WMODE bit according to the SDHI bus width, that is 0 for 64bit bus and 1 for 16/32bit bus. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
-
由 Marek Vasut 提交于
Older kernel versions or systems which do not connect eMMC reset line properly may not be able to handle situations where either the eMMC is left in HS200/HS400 mode or SD card in UHS modes by the bootloader and may misbehave. Downgrade the eMMC to HS/HS52 mode and/or SD card to non-UHS mode before booting the kernel to allow such older kernels to work with modern U-Boot. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
-
- 16 2月, 2019 11 次提交
-
-
由 Heinrich Schuchardt 提交于
If the last block in the relocation table contains only a single relocation, the current coding ignores it. Fix the determination of the end of the relocation table. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
- Add missing function descriptions. - Update existing function descriptions to match Sphinx style. - Add lib/efi_loader/efi_image_loader.c to the input files for Sphinx generated documentation. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Free resources upon failure. Correct the function description. As there is no need for any special address in the dummy memory device path passed via the EFI_LOADED_IMAGE_PROTOCOL simply use 0 as address. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
`bootefi selftest` fails on qemu-x86_defconfig if efi_selftest() is not invoked using EFI_CALL(). Likewise we call the entry point of EFI payloads with EFI_CALL(efi_start_image()). entry_count indicates if we are in U-Boot (1) or in EFI payload code (0). As we start in U-Boot code the initial value has to be 1. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Remove the duplicate code in efi_do_enter() and use efi_start_image() to start the image invoked by the bootefi command. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Up to now efi_load_pe() returns the entry point or NULL in case of an error. This does not allow to return correct error codes from LoadImage(). Let efi_load_pe() return a status code and fill in the entry point in the corresponding field of the image object. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
If we want to properly unload images in Exit() the memory should always be allocated in the same way. As we allocate memory when reading from file we should do the same when the original image is in memory. A further patch will be needed to free the memory when Exit() is called. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
In case of an error we should set the returned pointers to NULL. This ensures that an illegal free does not occur even if the caller calls free() for the handles. If protocols cannot be installed, release all resources. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
In test/py/conftest.py the assumption is made that for if a test is called with `ut unicode` the test function name starts with 'unicode_test_'. As the Unicode tests did not follow this naming scheme they were not executed by `make tests`. Rename the Unicode test functions. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Commit 0e66c10a ("lib: vsprintf: avoid overflow printing UTF16 strings") broke the Unicode unit tests: an illegal UTF16 code point should be printed as '?'. Fixes: 0e66c10a ("lib: vsprintf: avoid overflow printing UTF16 strings") Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Provide a unit test that calls LoadImage() with a file device path and executes the application via StartImage(). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-