- 24 10月, 2020 11 次提交
-
-
由 Jaehoon Chung 提交于
It doesn't need to consider start byte address. If ramdisk size is 0x800000 and start address is 0x2700000, then it's used until 0x02efffff, not 0x02f00000. But it's detected to overlapt RD image, when kernel start address is 0x02f00000. Because it's doing wrong calculation about rd_len. This patch fixed wrong calculation address position when check condition. In addition, it needs to check one more condition about overlapping entire area. Fixes: commit fbde7589 ("common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image") Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
-
由 Lad Prabhakar 提交于
do_save() function defined in fs.c also supports FAT file system re-use the same for fatwrite command. Also fix the FAT test script to match the expected output. Signed-off-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: NBiju Das <biju.das.jz@bp.renesas.com>
-
由 Heinrich Schuchardt 提交于
Provide unit tests for functions print_freq() and print_size(). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Bin Meng 提交于
Enable the command "misc" for accessing miscellaneous devices with a MISC uclass driver. The command provides listing all MISC devices as well as read and write functionalities via their drivers. Signed-off-by: NBin Meng <bin.meng@windriver.com>
-
由 Bin Meng 提交于
CONFIG_CMD_TIMER merits a single file instead of co-exist in the sleep command file. Signed-off-by: NBin Meng <bin.meng@windriver.com>
-
由 Bin Meng 提交于
The "cmd/Kconfig" has a TODO description for CMD_MISC that it should really be named as CMD_SLEEP. Change it in the whole source tree. Signed-off-by: NBin Meng <bin.meng@windriver.com>
-
由 Pali Rohár 提交于
This change fixes two issues when building u-boot-nodtb.bin target: * Remove intermediate binary u-boot-nodtb.bin from disk when static_rela call (which modifies u-boot-nodtb.bin binary) failed. It is required because previous objcopy call creates binary and static_rela finish it. * Do not call static_rela cmd when u-boot-nodtb.bin binary was not created/updated by previous objcopy call. Second fix would ensure that u-boot-nodtb.bin binary is not updated when all prerequisites were up-to-date. And therefore final binary u-boot.bin is not updated in case all prerequisites were not modified and were up-to-date. Now running 'make SOURCE_DATE_EPOCH=0 u-boot.bin' second time now does not touch u-boot.bin binary in case nothing was modified, so GNU make can correctly detect that everything is up-to-date. Signed-off-by: NPali Rohár <pali@kernel.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the driver can support live DT. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Patrick Delaunay 提交于
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the driver can support live DT. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Update the size of states_array to avoid overflow for dev_pdata->voltages[j] and dev_pdata->states[j]. As the size of array is GPIO_REGULATOR_MAX_STATES, the size of states_array is limited by GPIO_REGULATOR_MAX_STATES * 2 = 4 instead of 8 previously. The value of the "count" variable is limited by the third parameter of fdtdec_get_int_array_count. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heinrich Schuchardt 提交于
(A && A == 0x20) is only true for (A == 0x20). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 23 10月, 2020 8 次提交
-
-
-
由 Tom Rini 提交于
I had inadvertently merged the Xen series before everything was fully happy with the board maintainer. Revert the series.
-
由 Tom Rini 提交于
This reverts commit 18426bf0. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This reverts commit 3a51b2a2. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This reverts commit 16389a74. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This reverts commit 82e21b39. Signed-off-by: NTom Rini <trini@konsulko.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi由 Tom Rini 提交于
- sun8i emac changes (Andre) - SCP firmware (Samuel)
-
由 Tom Rini 提交于
- Assorted updates for Xen, IPQ40xx, ASpeed, Keymile - Assorted typo / documentation fixes - Fix default preboot cmd to act like before with USB_STORAGE set - A number of other bugfixes throughout the code
-
- 22 10月, 2020 21 次提交
-
-
由 Heiko Schocher 提交于
add Kconfig option for pcf8563 driver and run tools/moveconfig.py Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Fabien Parent 提交于
dev_err has been used for debugging and a few dev_err message are printed for normal code execution. Make them dev_dbg instead. Signed-off-by: NFabien Parent <fparent@baylibre.com> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
由 AKASHI Takahiro 提交于
By using a hypervisor call, we can implement DEBUG_UART on xen. This will allow us to see messages even earlier than serial_init(). Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
-
由 AKASHI Takahiro 提交于
Those definitions added are used with HYPERVISOR_console_io(). Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
由 AKASHI Takahiro 提交于
This new function, xen_debug_putc(), is intended to be used to enable CONFIG_DEBUG_UART on xen guest. Please note that the underlying functionality in Xen is available only when Xen is configured with !NDEBUG but is much simpler than a generic HYPERVISOR_console_io(). Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
由 AKASHI Takahiro 提交于
At present, DM_FLAG_PRE_RELOC is set only if !OF_CONTROL. It doesn't make sense for this para-virtualized driver. With this patch applied, you will be able to see early boot messages: U-Boot 2020.10-00001-ge442e71a6c52-dirty (Oct 15 2020 - 11:02:25 +0900) xenguest Xen virtual CPU Model: XENVM-4.15 DRAM: 128 MiB PVBLOCK: (XEN) gnttab_mark_dirty not implemented yet pvblock: 0 In: hypervisor Out: hypervisor Err: hypervisor xenguest# Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
由 Chia-Wei, Wang 提交于
1. Rename AST2500 reset driver from ast2500-reset.c to reset-ast2500.c 2. Rename AST2500 reset kconfig option from AST2500_RESET to RESET_AST2500 Signed-off-by: NChia-Wei, Wang <chiawei_wang@aspeedtech.com> Reviewed-by: NRyan Chen <ryan_chen@aspeedtech.com>
-
由 Chia-Wei, Wang 提交于
The System Control Unit (SCU) controller of Aspeed SoCs provides the reset control for each peripheral. This patch refactors the reset method to leverage the SCU reset control. Thus the driver dependency on watchdog including dedicated WDT API and reset flag encoding can be eliminated. The Kconfig description is also updated accordingly. Signed-off-by: NChia-Wei, Wang <chiawei_wang@aspeedtech.com> Reviewed-by: NRyan Chen <ryan_chen@aspeedtech.com>
-
由 Dario Binacchi 提交于
The 12d15262 commit fixed the get_rate helper because the set_parent one did not re-parent the clock device to the new parent. The 4d139f38 commit allows you to remove this workaround by calling the clk_get_parent_rate routine. Signed-off-by: NDario Binacchi <dariobin@libero.it>
-
由 Chance.Yang 提交于
Fix "ram" typos for serial flash Signed-off-by: NChance.Yang <chance.yang@vatics.com>
-
由 Simon Glass 提交于
Fix up the documentation which was lost in a merge conflict in the conversion to RST. Fixes: 52d3df7f ("log: Allow LOG_DEBUG to always enable log output") Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Naoki Hayama 提交于
%s/occured/occurred/ Signed-off-by: NNaoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Naoki Hayama 提交于
%s/occured/occurred/ Signed-off-by: NNaoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: NMarek Behún <kabel@kernel.org> Reviewed-by: NQu Wenruo <wqu@suse.com>
-
由 Naoki Hayama 提交于
%s/occured/occurred/ Signed-off-by: NNaoki Hayama <naoki.hayama@lineo.co.jp>
-
由 Patrick Delaunay 提交于
Remove the default value "usb start" for CONFIG_USB_STORAGE as the USB storage boot initialization is correctly managed by distro boot command ('usb_boot' defined in include/config_distro_bootcmd.h already include the command 'usb start'). Fixes: 324d7799 ("Define default CONFIG_PREBOOT with right config option") Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Dario Binacchi 提交于
Replace 'dev->dev' with '@desc->dev' in the gpio_request_by_name function desc parameter description. Signed-off-by: NDario Binacchi <dariobin@libero.it> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Dario Binacchi 提交于
Complete the devp parameter description. Signed-off-by: NDario Binacchi <dariobin@libero.it> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Holger Brunck 提交于
Instead having a hard coded value for "cramfsaddr" after compile time, we change it to take the variable "cramfsaddr" for the ubicopy variable. This makes sure that ubicopy uses the right address, even when the value for "cramfsaddr" has changed. CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: NHolger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Holger Brunck 提交于
Due to increasing kernel image sizes we get problems when decompressing the kernel image. To fix this we need to change the addresses where we load and where we extract the kernel. Also we need to adapt the address where to load the CRAMFS image and where to load the DTB file. While at it also harmonize all boards for PPC and ARM to have the same values. Also we add a new variable "env_version", so that the userspace is able to detect if this is a u-boot binary with updated values or not. CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: NHolger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: NHeiko Schocher <hs@denx.de> [trini: Remove old values from kmp204x.h] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Heinrich Schuchardt 提交于
In the International System of Units (SI) the prefix kilo is abbreviated as 'k' not 'K'. 'K' is the symbol for Kelvin. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Robert Marko 提交于
Since we now have the driver for Qualcomm PRNG HW, lets use it and add the necessary clocks and nodes. Signed-off-by: NRobert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
-