- 23 3月, 2019 1 次提交
-
-
由 Alexander Graf 提交于
Commit 1416e2d2 ("armv8: make SPL exception vectors optional") had a typo in it which effectively disabled exception handling in SPL code always. Since nobody complained, I guess we may as well disable exception handling in SPL always by default. So fix the bug to make the config option effective, but disable exception handling in SPL by default. This gets us to the same functionality as before by default, but with much less code included in the binary. Signed-off-by: NAlexander Graf <agraf@suse.de> Reviewed-by: NMatthias Brugger <mbrugger@suse.com> Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
-
- 22 3月, 2019 7 次提交
-
-
由 Marek Vasut 提交于
When the SPL has full fitImage support, do not generate fitImage with external data. The full fitImage code assumes the entire fitImage is loaded in RAM, and the SPL uses fdt_totalsize() to determine the size of the whole fitImage, which can not work with external data. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
-
由 Heinrich Schuchardt 提交于
CONFIG_SYS_HELP_CMD_WIDTH is used to format the output of help without any arguments. CONFIG_SYS_HELP_CMD_WIDTH = 8 is too narrow to fit all our commands. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Faiz Abbas 提交于
With U-boot supporting environment in multiple places, enable only ENV_IS_IN_EMMC Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Keerthy 提交于
Push the Starting kernel print to the end just before the dm_remove_devices call. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
git://git.denx.de/u-boot-socfpga由 Tom Rini 提交于
- ARM: socfpga: Build sfp image only for Gen5 and Arria10 devices
-
git://git.denx.de/u-boot-efi由 Tom Rini 提交于
Pull request for UEFI system for v2019.04-rc5 A bunch of small fixes. The major ones being - avoid illegal memory access in efi_allocate_pool() on 32 bit systems - avoid endless loop in HII protocol
-
-
- 21 3月, 2019 9 次提交
-
-
This patch fixes below warnings found with checker tool. The variable len in i2c_msg struct is of unsigned type and it is received as recv_count which is unsigned type but it is checked with < 0 which is always false, hence removed it. The local variable curr_recv_count is declared as signed type and compared aginst unsigned recv_count which is incorrect. This is fixed by declaring it as unsigned type. drivers/i2c/i2c-cdns.c: In function ‘cdns_i2c_read_data’: drivers/i2c/i2c-cdns.c:317:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if ((recv_count < 0)) ^ drivers/i2c/i2c-cdns.c:340:24: warning: comparison of integer expressions of different signedness: ‘u32’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare] updatetx = recv_count > curr_recv_count; ^ drivers/i2c/i2c-cdns.c:361:39: warning: comparison of integer expressions of different signedness: ‘u32’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare] while (readl(®s->transfer_size) != Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Dalon Westergreen 提交于
The sfp file is only valid for Gen5 (Cyclone5 & Arria5) and Arria10 devices. The file should only be built for these devices. Signed-off-by: NDalon Westergreen <dalon.westergreen@intel.com>
-
由 Heinrich Schuchardt 提交于
The check testing the string result of get_string() returned the wrong result. The result was ignored. Use efi_st_strcmp_16_8() for the string comparison. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
printf("%ls", ..) expects u16 * as argument to print. There is not need for a conversion to wchar_t *. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
It does not make any sense to check if a pointer is NULL if we have dereferenced it before. Reported-by: Coverity (CID 185827) Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
A misplaced return statement lead to a memory leak in efi_dump_single_var(). Reported-by: Coverity (CID 185829) Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Add a missing return statement in efi_get_next_variable_name(). Reported-by: Coverity (CID 185834) Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Avoid an endless loop in add_strings_package(). Suggested-by: NTakahiro Akashi <takahiro.akashi@linaro.org> Reported-by: Coverity (CID 185833) Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
efi_allocate_pages() expects a (uint64_t *) pointer to pass the address of the assigned memory. If we pass the address of a pointer here, an illegal memory access occurs on 32bit systems. Fixes: 282a06cb ("efi_loader: Expose U-Boot addresses in memory map for sandbox") Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 20 3月, 2019 1 次提交
-
-
git://git.denx.de/u-boot-marvell由 Tom Rini 提交于
- Enable network interface on clearfog_gt_8k (Baruch) - Fix dreamplug boot by adding an spi0 alias to the DT (Chris) - Fix / enhance Marvell ddr3 setup / parameters (Chris) - Change CONFIG_SYS_MALLOC_F_LEN to 0x2000 on db-88f6820-amc (Chris) - Enable SPL_FLASH_BAR on db-88f6820-amc (Chris) - Use correct pcie controller name in Armada-38x dts files (Chris) - Disable d-cache on Kirkwood platforms as currently needed (Chris) - Add a more descriptive comment to pci_mvebu.c (Stefan) - Update Marvell maintainers entry (Stefan)
-
- 19 3月, 2019 13 次提交
-
-
-
-
由 Chris Packham 提交于
Prior to commit 93b283d4 ("ARM: CPU: arm926ejs: Consolidate cache routines to common file") the kirkwood boards didn't have and dcache support. The network and usb drivers rely on this. Set CONFIG_SYS_DCACHE_OFF in the Kirkwood specific config.h. Reported-by: NLeigh Brown <leigh@solinno.co.uk> Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NStefan Roese <sr@denx.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
When armada-385.dtsi was sync'd from Linux the name of the node describing the pcie controller was changed from pcie-controller to pcie. Some of the boards that include armada-385.dtsi were missed in the update retaining the old name. This updates the affected boards. Reported-by: NВлад Мао <vlaomao@gmail.com> Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
This board uses Micron N25Q256A SPI flash. Enable SPI_FLASH_BAR to allow us to access the whole chip. Signed-off-by: NChris Packham <judge.packham@gmail.com> Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Set CONFIG_SYS_MALLOC_F_LEN to match the rest of the mvebu boards. The default of 0x400 is not enough when booting from SPI. Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Inactive chip-selects will give invalid values for read_sample so don't consider them when trying to determine the overall min/max read sample. Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz> [https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/18] Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
Based on the JEDEC standard JESD79-3F. The tRAS timings should include the highest speed bins at a given frequency. This is similar to commit 683c67b ("mv_ddr: ddr3: fix tfaw timimg parameter") where the wrong comparison was used in the initial implementation. Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz> [https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/15] Signed-off-by: NChris Packham <judge.packham@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
The conversion to DM_SPI managed to break accessing the environment on dreamplug. This is because the environment code relies on being to able to select the SPI device based on the sequence number. Add an alias so that the spi0 bus gets sequence number 0. Reported-by: NLeigh Brown <leigh@solinno.co.uk> Signed-off-by: NChris Packham <judge.packham@gmail.com> Tested-by: NLeigh Brown <leigh@solinno.co.uk> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch does the following changes to the u-boot-marvell maintainers entry: - Add Armada-7k/8k to the list - Remove Prafulla and Luka since they have been silent on the list for a long time. Please speak up, if you would like to continue or better start maintaining. - Add multiple Marvell / MVEBU related driver directories and files Signed-off-by: NStefan Roese <sr@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tom Rini <trini@konsulko.com> Acked-by: NLuka Perkov <luka.perkov@sartura.hr> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Baruch Siach 提交于
Enable the mvpp2 network driver for the Armada 8K SoC. Enable the Marvell PHY driver for the on-board 1512 PHY. Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Reviewed-by: NStefan Roese <sr@denx.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch adds a comment to explain the use of the hardcoded value for the number of address cells in mvebu_get_tgt_attr(). This should help to rework this function, once CONFIG_OF_LIVE is enabled for MVEBU in general. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 16 3月, 2019 5 次提交
-
-
由 Simon Goldschmidt 提交于
To boot from fpga on socfpga gen5, we need to set CONFIG_SPL_TEXT_BASE to 0xC0000000 (hps2fpgaslaves base address). Since converting CONFIG_SPL_TEXT_BASE to Kconfig hasn't been successful so far, let's make this value overridable in socfpga_common.h, so that we can have different board configs override this in socfpga_common.h. Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Ley Foon Tan 提交于
Syscon register is required in dts to select correct PHY interface. Fix error below: Net: Failed to get syscon: -2 Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Neil Armstrong 提交于
When booting on a 64-bit system, the boot_addr_start buffer is not large enough to contain a 64-bit number, thus leading to a crash even if fastboot_buf_addr is valid, only the high part of the address will be printed to boot_addr_start : fastboot with fastboot_buf_addr = 0x0000000006000000: downloading of 92239872 bytes finished Booting kernel at 0x00000000... "Synchronous Abort" handler, esr 0x96000004 elr: 00000000010561f4 lr : 0000000001056fac (reloc) <snip> x28: 000000007df2d38f x29: 000000007df2d1b0 Resetting CPU ... With this fix, boot_addr_start can have the full 64-bit address passed to bootm. Fixes: f73a7df9 ("net: fastboot: Merge AOSP UDP fastboot") Cc: Simon Glass <sjg@chromium.org> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Jean-Jacques Hiblot 提交于
commit 801f1fa4 "dm: usb: udc: Use SEQ_ALIAS to index the USB gadget ports" changed the way the udevice if found. It uses the alias to find a udevice for a given USB port number. In the commit log it was stated that if no alias is provided, the bind order will be used instead. However it doesn't work. Fixing this by adding a call to uclass_get_device() if uclass_get_device_by_seq() fails. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Tested-by: NVignesh R <vigneshr@ti.com>
-
由 Sean Nyekjaer 提交于
Watchdog is not handled while waiting for fastboot commands. Tested on a i.MX6 ULL EVK board. Signed-off-by: NSean Nyekjaer <sean@geanix.com>
-
- 15 3月, 2019 4 次提交
-
-
git://git.denx.de/u-boot-fsl-qoriq由 Tom Rini 提交于
- DPAA2 fixes and DDR errata workaround for LS1021A
-
https://github.com/xypron2/u-boot由 Tom Rini 提交于
Pull request for UEFI system for v2019.04-rc4 Fix an error with the serial communication on boards with a very small UART buffer which leads to a stalled system. Provide an X86 reset driver for the UEFI runtime. Fix a problem with parallel builds.
-
由 Alison Wang 提交于
Barrier transactions from CCI400 need to be disabled till the DDR is configured, otherwise it may lead to system hang. The patch adds workaround to fix the erratum. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: NAlison Wang <alison.wang@nxp.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-
由 Pramod Kumar 提交于
Fix EC1 and EC2 read from correct offset 26, instead of 25 Signed-off-by: NPramod Kumar <pramod.kumar_1@nxp.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-