Convert the marsboard/riotboard to use DM_USB.
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

Convert the two Embest boards to use DM MMC.
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

Enable OF_CONTROL and DM for gpio and pin control support
on the i.MX6D based riotboard.
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

It doesn't make much sense to have two separate configs for
the riotboard so let's merge the SPL config into the main one
for less duplication.
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

Enable OF_CONTROL and DM for gpio and pin control support
on the i.MX6Q based embestmx6boards marsboard.
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

Import the iMX6 based marsboard and riotboard. dts files from Linux 5.12-rc1
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: NFabio Estevam <festevam@gmail.com>

While initializing dram in spl_dram_init(), mdelay() is called that in
order calls get_ticks() that  verifies if timer exists, if doesn't, it
throws a panic(), but since preloader_console_init() has still not been
called those panic()s will fail. This doesn't help debugging, so let's
setup console before calling spl_dram_init() by moving it after
spl_dram_init().
Signed-off-by: NGiulio Benetti <giulio.benetti@benettiengineering.com>

While initializing dram in spl_dram_init(), mdelay() is called that in
order calls get_ticks() that  verifies if timer exists, if doesn't, it
throws a panic(), but since preloader_console_init() has still not been
called those panic()s will fail. This doesn't help debugging, so let's
setup console before calling spl_dram_init() by moving it after
spl_dram_init().
Signed-off-by: NGiulio Benetti <giulio.benetti@benettiengineering.com>

While initializing dram in spl_dram_init(), mdelay() is called that in
order calls get_ticks() that  verifies if timer exists, if doesn't, it
throws a panic(), but since preloader_console_init() has still not been
called those panic()s will fail. This doesn't help debugging, so let's
setup console before calling spl_dram_init() by moving it after
spl_dram_init().
Signed-off-by: NGiulio Benetti <giulio.benetti@benettiengineering.com>

There is a QSPI chip connected to the FSPI.  Enable the defconfig
to support it.
Signed-off-by: NAdam Ford <aford173@gmail.com>

There have been a few updates including flexspi, so it's necessary
to re-sync.
Signed-off-by: NAdam Ford <aford173@gmail.com>

Convert usbarmory to OF_CONTROL and DM for gpio, pin
usb support on the i.MX53 based usbarmory.
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Cc: Andrej Rosano <andrej@inversepath.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

Import the iMX53 based usbarmory dts files from Linux 5.12-rc1
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Cc: Andrej Rosano <andrej@inversepath.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: NFabio Estevam <festevam@gmail.com>

Fix an URL for downloading the SCFW binary for an Apalis iMX8X
and improve u-boot image build instructions.
Signed-off-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>

Since Toradex provides the full set of overlays for Linux kernel
for display interfaces for both Apalis iMX6Q and Colibri iMX6DL
modules, the video= settings are obsolete. Remove them.
Signed-off-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>

All the other boards have tdxargs specified for setting manual kernel
command-line arguments. Add them also to NAND-based boards.
Signed-off-by: NPhilippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>

Remove duplicate of mmc0, set this boot order:
1) SD
2) eMMC
3) USB
4) DHCP boot

Fixes: 0e15165b ("colibri_imx6: boot env configuration updates")
Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>

commit 03f1f78a ("spl: fit: Prefer a malloc()'d buffer for loading images")'
changed the way buffer allocation worked for SPL to a more flexible
method.

For venice this caused breakage that is resolved by increasing the size
of CONFIG_SYS_SPL_MALLOC_SIZE as the current FIT slighly exceeds 512KiB.

Additionally remove the unnecessary comment on CONFIG_SPL_BSS_MAX_SIZE
and CONFIG_SYS_SPL_MALLOC_SIZE as the size is obvious from the define.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>

use dm_i2c_probe instead of i2c_get_chip which appears to be more
reliable.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>

Use my personal e-mail address for U-Boot related work.
Signed-off-by: NFabio Estevam <festevam@gmail.com>

Enable driver model for SPI which allows us to remove the iomux
and init.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

Enable driver model for MTD and NAND support allowing us to remove
the iomux, init, and most of the static configuration.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

Enable driver model support for MMC and SATA.

Note that DM_MMC requires aliases for your mmc devices so
they are added to the dts. Linux does not support enumerating mmc
devices by alias so these are not present in the Linux dts.

Note that we still need board_mmc_init() and board_mmc_getcd() for
not DM SPL to support MMC.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

Enable dm support for USB (which also requires dm support for fixed
regulators used for vbus enable) and remove usb iomux which is no
longer needed.

We can remove the handling of otgpwr_en gpio as this is defined in
dt as usbotg vbus-supply but we need to keep the handling of
USB_HUB_RST# for boards that have a USB HUB as that isn't defined in
the dt's currently.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

Once the IMX6 pinctrl driver is added UART is fully using driver mode
so we no longer need to config and initialize it.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

In preparation for dm conversion convert to OF_CONTROL by adding FIT image
support and multi dtb.

Add a board_fit_config_name_match to match the dtb based off of EEPROM
model.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

The fsl-usb dt bindings in Linux default dr_mode to 'host' for
backward compatibility however U-Boot prints an error if
this property does not exist. Declare it in the Gateworks
Ventana device-trees to avoid the error.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

Add Gateworks Ventana dts/dtsi files from Linux 5.11 in preparation for
conversion to driver-model.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

Add td1997x header from Linux to be included by dts files.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>

Add a weak nand_get_mtd function for nand drivers to provide mtd info
and use this to set pagesize such that reading of non page-aligned
elements can succeed.

The spl_load_simple_fit already handles block block access so all we
need to do is provide the nand writesize as the block length.

Further cleanup of the drivers which use nand_spl_loaders.c such as
am335x_spl_bch.c, atmel_nand.c, and nand_spl_simple.c could be done
using info from mtd_info instead of statically defined details.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

commit 9f6a14c4 ("spl: fit: nand: fix fit loading in case of bad blocks")
added support for adjusting the image offset to account for bad blocks.
However this requires nand_spl_adjust_offset() which requires fully defined
specifics of the NAND chip being used may not be avialable.

Allow skipping this support for drivers or configs which don't specify
the NAND chip details statically with defines.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

The OCRAM_S is regular memory, just like the OCRAM, add it to the MMU
tables so it can be used and cached.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

update doc after using binman to pack images
Signed-off-by: NPeng Fan <peng.fan@nxp.com>

Use binman to pack images
Signed-off-by: NPeng Fan <peng.fan@nxp.com>

Update doc after using binman to pack images
Signed-off-by: NPeng Fan <peng.fan@nxp.com>

Use binman to pack images.
Signed-off-by: NPeng Fan <peng.fan@nxp.com>

Use binman to pack images
Signed-off-by: NPeng Fan <peng.fan@nxp.com>

Update doc after switch to binman to pack images
Signed-off-by: NPeng Fan <peng.fan@nxp.com>

Use binman to pack images
Signed-off-by: NPeng Fan <peng.fan@nxp.com>

Previous patch "MLK-18044-4: crypto: caam: Fix pointer size to 32bit
for i.MX8M" breaks the 64 bits CAAM.

Since i.MX CAAM are all 32 bits no matter the ARM arch (32 or 64),
to adapt and not break 64 bits CAAM support,  add a new config
CONFIG_CAAM_64BIT and new relevant type "caam_dma_addr_t".

This config is default enabled when CONFIG_PHYS_64BIT is set except
for iMX8M.
Signed-off-by: NYe Li <ye.li@nxp.com>
Reviewed-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NPeng Fan <peng.fan@nxp.com>