- 10 8月, 2009 22 次提交
-
-
由 Wolfgang Denk 提交于
Update CHANGELOG Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
tftp.c:294: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness This was only visible for the utx8245 board which seems to have DEBUG enabled. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Dirk Behme 提交于
Remove bogus config.mk entry, fix newline and remove redundant omap3/config.mk Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>
-
由 Dirk Behme 提交于
Applying two indepenent OMAP3 patches resulted in missing GPMC_CONFIG_CS0_BASE. Patch "omap3: embedd gpmc_cs into gpmc config struct" removes GPMC_CONFIG_CS0_BASE, independent patch "omap3: bug fix for NOR boot support" introduces it's usage. Re-introduce GPMC_CONFIG_CS0_BASE. Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>
-
由 Ilya Yanok 提交于
This is a port of Linux driver for SDHC host controller hardware found on Freescale's MX2 and MX3 processors. Uses new generic MMC framework (CONFIG_GENERIC_MMC) and it looks like there are some problems with a framework (at least on LE cpus). Some of these problems are addressed in the following patches. Signed-off-by: NIlya Yanok <yanok@emcraft.com>
-
由 Alessandro Rubini 提交于
Signed-off-by: NAlessandro Rubini <rubini@gnudd.com>
-
由 Albin Tonnerre 提交于
This chip is used in a number of boards manufactured by Calao-Systems which should be supported soon. This driver provides the necessary spi_read and spi_write functions necessary to communicate with the chip. Signed-off-by: NAlbin Tonnerre <albin.tonnerre@free-electrons.com>
-
由 Prafulla Wadaskar 提交于
It is recommended to define the macro CONFIG_SYS_64BIT_VSPRINTF for NAND specific warning removal, same is done in this patch Signed-off-by: NPrafulla Wadaskar <prafulla@marvell.com>
-
由 Josh Boyer 提交于
It was brought to our attention that U-Boot contains code derived from the IBM OpenBIOS source code originally provided with some of the older PowerPC 4xx development boards. As a result, the original license of this code has been carried in the various files for a number of years in the U-Boot project. IBM is dual-licensing the IBM code contributions already present in U-Boot under either the terms of the GNU General Public License version 2, or the original code license already present. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Kumar Gala 提交于
If the size of a region equal to 4G it can't be represnted in a 32-bit BAR so we should have marked that case as MEM64. Additionally bump the number of inbound windows up to 4 to handle the fact that Freescale PPCs that have an implicit window for CCSRBAR. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Wolfgang Denk 提交于
The ARM EABI defines new names for GCC helper functions, and GCC seems to need some new functions as well. This patch is a minimal-invasive approach to fix problems with EABI conformant tool chains (to be used with "USE_PRIVATE_LIBGCC=yes"). Signed-off-by: NWolfgang Denk <wd@denx.de> Tested-by: NDirk Behme <dirk.behme@googlemail.com>
-
由 Peter Tyser 提交于
An off-by-one error in hush.c resulted in an unintentional free() call every time a command was executed Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Detlev Zundel 提交于
Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Detlev Zundel 提交于
While at it, remove initialization of variables which will be set before usage in all cases. Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Anatolij Gustschin 提交于
Add mtc state subcommand description to the help of mtc command. Remove some newlines in description of commands for proper help formating. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Grzegorz Bernacki 提交于
Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
-
由 Wolfgang Denk 提交于
Remove bogus newline character that got added to the .name field of the disk_partition_t structure. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Luigi 'Comio' Mantellini 提交于
Signed-off-by: NLuigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
-
由 Jens Scharsig 提交于
Signed-off-by: NJens Scharsig <esw@bus-elektronik.de>
-
由 Mike Frysinger 提交于
The only environment type that uses this variable is spi flash, and that is only because it is reimplementing the common set_default_env() function. So fix the spi flash code and kill off the default_environment_size in the process. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
While we're here, fix the broken #ifdef handling in _exports.h. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 08 8月, 2009 10 次提交
-
-
-
由 Penda Naveen Kumar 提交于
This patch provides bug fix, when omap3 uses nor boot. Signed-off-by: Penda Naveen Kumar<pnaveen@ti.com> Acked-by: NDirk Behme <dirk.behme@googlemail.com>
-
由 Michael Evans 提交于
The attached patch corrects an error in the examples/Makefile which causes the applications in the examples directory to hang on OMAP3 based boards. The current Makefile sets -Ttext during linking to 0x0c100000 which is outside of addressable SDRAM memory. The script corrects the existing ifeq...else...endif logic to look at the VENDOR tag rather than the CPU tag. The patch affects the following configs: omap3_beagle_config, omap3_overo_config, omap3_evm_config, omap3_pandora_config, omap3_zoom1_config and omap3_zoom2_config. Signed-off-by: NMichael Evans <horse_dung@hotmail.com> Edited commit message. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Dirk Behme 提交于
replace variable types in ctrl_structs for omap3 by those with fixed size (u8, u16, u32). Additional ifndef-protection is needed by examples which do not compile when including asm/types.h Signed-off-by: NMatthias Ludwig <mludwig@ultratronik.de> Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>
-
由 Dirk Behme 提交于
Signed-off-by: NMatthias Ludwig <mludwig@ultratronik.de> Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>
-
由 Dirk Behme 提交于
Signed-off-by: NMatthias Ludwig <mludwig@ultratronik.de> Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>
-
由 Roy Zang 提交于
Based on Intel PRO/1000 Network Driver 7.3.20-k2 Add Intel E1000 PCIE card support. The following cards are added: INTEL_82571EB_COPPER INTEL_82571EB_FIBER, INTEL_82571EB_SERDES INTEL_82571EB_QUAD_COPPER INTEL_82571PT_QUAD_COPPER INTEL_82571EB_QUAD_FIBER INTEL_82571EB_QUAD_COPPER_LOWPROFILE INTEL_82571EB_SERDES_DUAL INTEL_82571EB_SERDES_QUAD INTEL_82572EI_COPPER INTEL_82572EI_FIBER INTEL_82572EI_SERDES INTEL_82572EI INTEL_82573E INTEL_82573E_IAMT INTEL_82573L INTEL_82546GB_QUAD_COPPER_KSP3 INTEL_80003ES2LAN_COPPER_DPT INTEL_80003ES2LAN_SERDES_DPT INTEL_80003ES2LAN_COPPER_SPT INTEL_80003ES2LAN_SERDES_SPT 82571EB_COPPER dual ports, 82572EI single port, 82572EI_COPPER single port PCIE cards and 82545EM_COPPER, 82541GI_LF pci cards are tested on both P2020 board and MPC8544DS board. Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Mike Frysinger 提交于
In the previous enetaddr refactoring, the assumption with commit 56b555a6 was that the eth layer would handle the env -> device enetaddr syncing. This was not the case as eth_initialize() is called only once and the sync occurs there. So make sure the eth_init() function does the env -> device sync with every network init. Reported-by: NAndrzej Wolski <awolski@poczta.fm> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Robin Getz 提交于
Minor ./net cleanups - no functional changes - change #ifdef DEBUG printf(); #endif to just debug() - changed __FUNCTION__ to __func__ - got rid of extra whitespace between function and opening brace - removed unnecessary braces on if statements gcc dead code elimination should make this functionally/size equivalent when DEBUG is not defined. (confirmed on Blackfin, with gcc 4.3.3). Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Matthias Ludwig 提交于
Embedd chip select configuration into struct for gpmc config instead of having it completely separated as suggested by Wolfgang Denk on http://lists.denx.de/pipermail/u-boot/2009-May/052247.htmlSigned-off-by: NMatthias Ludwig <mludwig@ultratronik.de>
-
- 05 8月, 2009 1 次提交
-
-
- 03 8月, 2009 1 次提交
-
-
由 David Brownell 提交于
For some reason the AT91rm9200 lowlevel init writes to a bunch of reserved or read-only addresses. All the boards seem to define the value-to-be-written values as zero ... but they shouldn't actually be writing *anything* there. No documented erratum justifies these accesses. It looks like maybe some pre-release BDI-2000 setup code has been carried along by cargo cult programming since at least late 2004 (per GIT history). Here's a patch disabling what seems to be bogosity. Tested on a csb337; there were no behavioral changes. Signed-off-by: NDavid Brownell <david-b@pacbell.net> on RM9200ek Tested-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 01 8月, 2009 2 次提交
-
-
由 David Hunter 提交于
Fix a typo in the GCDR(x) macro. It's a good thing no one was using it. Signed-off-by: NDavid Hunter <hunterd42@gmail.com>
-
由 Eric Benard 提交于
Needed for AT91SAM9260 NOR Boot on Eukrea's CPU9260. Signed-off-by: NEric Benard <eric@eukrea.com>
-
- 30 7月, 2009 4 次提交
-
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch is based on a diff created by Phong Vo from AMCC. Signed-off-by: NPhong Vo <pvo@amcc.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch is based on a diff created by Phong Vo from AMCC. Signed-off-by: NPhong Vo <pvo@amcc.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Some Canyonlands boards are equipped with different SODIMM's. This is no problem with the "normal" NOR booting Canyonlands U-Boot, since it automatically detects the SODIMM's via SPD data and correctly configures them. But the NAND booting version is different. Here we only have 4k of image size to completely setup the hardware, including DDR2 setup. So we need to use a fixed DDR2 setup here. This doesn't work for different SODIMM's right now. Currently only this Crucial SODIMM is support: CT6464AC667.8FB (dual ranked) Now some boards are shipped with this SODIMM: CT6464AC667.4FE (single ranked) This patch now supports both SODIMM's by configuring first for the dual ranked DIMM. A quick shows, if this module is really installed. If this test fails, the DDR2 controller is re-configured for the single ranked SODIMM. Tested with those SODIMM's: CT6464AC667.8FB (dual ranked) CT6464AC667.4FE (single ranked) Signed-off-by: NStefan Roese <sr@denx.de>
-