- 05 9月, 2021 1 次提交
-
-
由 Simon Glass 提交于
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 01 9月, 2021 2 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NRick Chen <rick@andestech.com>
-
- 28 6月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 15 3月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 08 1月, 2021 1 次提交
-
-
由 Hugh Cole-Baker 提交于
SPI flash on this machine is located on bus 1, default to using bus 1 for SPI flash and stop aliasing it to bus 0. Signed-off-by: NHugh Cole-Baker <sigmaris@gmail.com> Suggested-by: NSimon Glass <sjg@chromium.org> Fixes: c4cea2bb ("rockchip: Enable building a SPI ROM image on bob")
-
- 13 11月, 2020 1 次提交
-
-
由 Peter Robinson 提交于
Improve USB config so keyboard and USB-A ports work. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
-
- 10 10月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 11 8月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 05 8月, 2020 1 次提交
-
-
由 Jonas Smedegaard 提交于
This commit moves CONFIG_PREBOOT="usb start" to common/KConfig for all boards also declaring USB_KEYBOARD. Besides simplifying defconfig files, this also enables support for board-specific CONFIG_PREBOOT for sunxi boards: commit 37304aaf ("Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig") intended to support CONFIG_PREBOOT, but include/configs/sunxi-common.h hardcodes preboot as part of internally defined CONSOLE_STDIN_SETTINGS, silently ignoring any board-specific CONFIG_PREBOOT. Signed-off-by: NJonas Smedegaard <dr@jones.dk> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Series-Cc: Jagan Teki <jagan@amarulasolutions.com> Series-Cc: Lukasz Majewski <lukma@denx.de> Series-Cc: Andre Przywara <andre.przywara@arm.com>
-
- 28 7月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 07 7月, 2020 3 次提交
-
-
由 Peter Robinson 提交于
Some minor fixes for SPI flash on the Pinebook Pro and also default to saving environment to the SPI flash as it's guaranteed to be on board. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com> (applied with make savedefconfig) Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Peter Robinson 提交于
The built in keyboard on the Pinebook Pro is attached via USB so fix this up to ensure USB works as expected. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Peter Robinson 提交于
Enable the rng so UEFI can provide entropy for KASLR Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
- 26 6月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Due to how the Makefile logic is we currently get DM_SPI support in SPL enabled by having DM_SPI enabled for full U-Boot but not having CONFIG_SPL_DM_SPI set. Add this missing option to boards that were inadvertently making use of it. Cc: Adam Ford <aford173@gmail.com> Cc: Akash Gajjar <akash@openedev.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Chee Hong Ang <chee.hong.ang@intel.com> Cc: Chin-Liang See <clsee@altera.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Cc: Heiko Schocher <hs@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Levin Du <djw@t-chip.com.cn> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Marek Vasut <marex@denx.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Looijmans <mike.looijmans@topic.nl> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Machek <pavel@denx.de> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: Suniel Mahesh <sunil@amarulasolutions.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Wolfgang Grandegger <wg@aries-embedded.de> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NLuca Ceresoli <luca@lucaceresoli.net>
-
- 07 6月, 2020 1 次提交
-
-
由 Patrick Wildt 提交于
Enable CONFIG_PCI and CONFIG_NVME and related configs for the Pinebook Pro. Signed-off-by: NPatrick Wildt <patrick@blueri.se> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
- 05 6月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 31 5月, 2020 1 次提交
-
-
由 Peter Robinson 提交于
Specification: - Rockchip RK3399 - 4GB Dual-Channel LPDDR4 - eMMC socket - mSD card slot - 128Mbit (16Mb) SPI Flash - AP6256 for 11AC WiFi + BT5 - 14 inch 1920*1080 eDP MiPi display - Camera - USB 3.0, 2.0 ports - Type-C port with alt-mode display (DP 1.2) and 15W charge - DC 5V/3A - optional PCIe slot for NVMe SSD drive Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Tested-by: NVagrant Cascadian <vagrant@debian.org> Reviewed-by: NKever Yang <kever.yang@rock-chips.com> Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
- 26 5月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 22 5月, 2020 1 次提交
-
-
由 Jagan Teki 提交于
Due to board limitation some SSD's would work on rock960 PCIe M.2 only with 1.8V IO domain. So, this patch enables grf io_sel explicitly to make PCIe/M.2 to work. Cc: Tom Cubie <tom@radxa.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Acked-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
- 29 4月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 02 4月, 2020 1 次提交
-
-
由 Jagan Teki 提交于
Enable config options and console setting to respective rk3399 board for HDMI output. Boards supported and tested on this patch are: - NanoPc T4 - NanoPi M4 - NanoPi Neo4 - ROC-RK3399-PC - Rock960 Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Tested-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
- 30 1月, 2020 1 次提交
-
-
由 Jagan Teki 提交于
RK3288, RK3399 are now support cpu-info, so enable DISPLAY_CPUINFO by default. Reviewed-by: NKever Yang <kever.yang@rock-chips.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
- 23 1月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 05 12月, 2019 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 11月, 2019 1 次提交
-
-
由 Jagan Teki 提交于
Enable DWC3 core, gadget for rock960 board. This would help to use fastboot by default. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
- 21 11月, 2019 3 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Tom Rini 提交于
Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 17 11月, 2019 1 次提交
-
-
由 Peter Robinson 提交于
Enable TPL for rock960 like other rk3399 boards. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
- 10 11月, 2019 1 次提交
-
-
由 Kever Yang 提交于
Use the same SPL_STACK_R_ADDR in Kconfig instead of each board config; default to 0x4000000(64MB) instead of 0x80000(512KB) for this address can support all the SoCs including those may have only 64MB memory, and also reserve enough space for atf, kernel(in falcon mode) loading. After the ATF entry move to 0x40000, the stack from 0x80000 may be override when loading ATF bl31. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
- 23 9月, 2019 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 8月, 2019 1 次提交
-
-
由 Kever Yang 提交于
RK3399 SPL only support FIT image for ATF bl31. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
- 14 8月, 2019 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 20 7月, 2019 2 次提交
-
-
由 Kever Yang 提交于
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
There is no difference in rk3399 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
- 19 7月, 2019 4 次提交
-
-
由 Peter Robinson 提交于
Enable USB3 support via the dwc3 XHCI driver. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Peter Robinson 提交于
As the Rock960 doesn't have an onboard wired ethernet interface it's useful to have some common USB wired ethernet devices added to enable testing. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Peter Robinson 提交于
Enable the SDMA controller so the eMMC connected to the SDHCI controller (sdhci@fe330000) can make use of it. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Peter Robinson 提交于
We have both PMIC and Regulator functionality so it's useful to be able to see output and debug with the commands enabled. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-