- 05 9月, 2021 2 次提交
-
-
由 Simon Glass 提交于
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 04 9月, 2021 1 次提交
-
-
由 Simon Glass 提交于
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 9月, 2021 1 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NRick Chen <rick@andestech.com>
-
- 11 8月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 29 7月, 2021 4 次提交
-
-
由 Simon Glass 提交于
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Simon Glass 提交于
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com>
-
- 27 7月, 2021 2 次提交
-
-
由 Suman Anna 提交于
The J721E R5 SPL will no longer support booting of the Main R5FSS Core0 after the R5 SPL re-architecture for System Firmware split. The MCU R5F branch-only boot does not use the K3 R5F remoteproc driver, and relies only on the filesystem (FS) support for now. The K3 R5F remoteproc driver is therefore no longer needed in R5 SPL, so drop it from the J721E R5 defconfig. Signed-off-by: NSuman Anna <s-anna@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210726211311.5977-6-s-anna@ti.com
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 08 7月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 28 6月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 11 6月, 2021 1 次提交
-
-
由 Tero Kristo 提交于
Sysfw is not going to provide access to power management features in the new architecture, so SPL must implement these itself. Enable all the raw register access based clock + power domain drivers. Signed-off-by: NTero Kristo <t-kristo@ti.com> Signed-off-by: NTero Kristo <kristo@kernel.org>
-
- 12 5月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 04 2月, 2021 1 次提交
-
-
由 Faiz Abbas 提交于
Add configs to support UHS modes for the SD card and HS200 for the eMMC. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com> Signed-off-by: NAswath Govindraju <a-govindraju@ti.com>
-
- 29 7月, 2020 3 次提交
-
-
由 Simon Glass 提交于
At present we use the empty string to indicate that there is no FIT generator, but this doesn't allow an individual board to undefine it. Create a separate bool instead. Update the config of the boards which currently have an empty string. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Peng Fan 提交于
Done with: ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS -H Signed-off-by: NPeng Fan <peng.fan@nxp.com> [trini: A few more migrations] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 28 7月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 26 7月, 2020 1 次提交
-
-
由 Dave Gerlach 提交于
Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3 so the TI K3 SoC driver can be used for SoC detection. Signed-off-by: NDave Gerlach <d-gerlach@ti.com>
-
- 24 7月, 2020 1 次提交
-
-
git://git.denx.de/u-boot-dm由 Tom Rini 提交于
This reverts commit 5d3a21df, reversing changes made to 56d37f1c. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 21 7月, 2020 1 次提交
-
-
由 Dave Gerlach 提交于
Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3 so the TI K3 SoC driver can be used for SoC detection. Signed-off-by: NDave Gerlach <d-gerlach@ti.com>
-
- 07 7月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 30 6月, 2020 1 次提交
-
-
由 Lukasz Majewski 提交于
This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: NLukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 26 6月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Due to how the Makefile logic is we currently get DM_SPI support in SPL enabled by having DM_SPI enabled for full U-Boot but not having CONFIG_SPL_DM_SPI set. Add this missing option to boards that were inadvertently making use of it. Cc: Adam Ford <aford173@gmail.com> Cc: Akash Gajjar <akash@openedev.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Chee Hong Ang <chee.hong.ang@intel.com> Cc: Chin-Liang See <clsee@altera.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Cc: Heiko Schocher <hs@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Levin Du <djw@t-chip.com.cn> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Marek Vasut <marex@denx.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Looijmans <mike.looijmans@topic.nl> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Machek <pavel@denx.de> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: Suniel Mahesh <sunil@amarulasolutions.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Wolfgang Grandegger <wg@aries-embedded.de> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NLuca Ceresoli <luca@lucaceresoli.net>
-
- 29 4月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 09 3月, 2020 1 次提交
-
-
由 Faiz Abbas 提交于
Enable configs to support eMMC boot. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
- 03 3月, 2020 4 次提交
-
-
由 Tero Kristo 提交于
Enable ESM modules for both PMIC and SoC side for proper watchdog handling on the board. SPL_BOARD_INIT is also enabled so that the board init function probing the drivers is called. Signed-off-by: NTero Kristo <t-kristo@ti.com>
-
由 Keerthy 提交于
Remove saving ENV in eMMC in R5 as the power domains are not setup. Environment in eMMC cannot be read if we do not boot from eMMC. Signed-off-by: NKeerthy <j-keerthy@ti.com>
-
由 Keerthy 提交于
Enable R5F remoteproc support in R5 defconfig so that R5s can be started in SPL. While at it enable the SPL_FS_EXT4 config option to load the firmwares from file system. Signed-off-by: NKeerthy <j-keerthy@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Vignesh Raghavendra 提交于
Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com>
-
- 29 2月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 14 2月, 2020 1 次提交
-
-
由 Lokesh Vutla 提交于
Early cons will be used in uart boot. Enable the same for j721e_r5 Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
- 04 2月, 2020 4 次提交
-
-
由 Vignesh Raghavendra 提交于
Enable PCA953x IO expander to control MMC/SD power lines. Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Vignesh Raghavendra 提交于
Enable DFU, Fastboot and USB mass storage gadget related configs Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Vignesh Raghavendra 提交于
Enable USB Gadget for R5 SPL, A72 SPL and A72 U-Boot to support DFU boot Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Vignesh Raghavendra 提交于
Increase R5 SPL early malloc memory pool by ~7K to accommodate SPL USB DFU boot requirements Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
- 23 1月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 20 1月, 2020 1 次提交
-
-
由 Faiz Abbas 提交于
Add config to save and read back environment from eMMC. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-