- 04 5月, 2016 5 次提交
-
-
由 Marek Vasut 提交于
Initialize desc_before_addr, otherwise the USB core won't send the first 64B Get Device Descriptor request in common/usb.c function usb_setup_descriptor() . There are some USB devices which expect this sequence and otherwise can misbehave. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Tom Rini <trini@konsulko.com>
-
由 Marek Vasut 提交于
Introduce a new flag in the controller private data, which allows selectively disabling the OC protection. Use the standard 'disable-over-current' OF prop to set this flag. This OC protection must be disabled on EBV SoCrates rev 1. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org>
-
由 Marek Vasut 提交于
Introduce a boolean flag in the dwc2 controller private data and set it according to the macro (for now) instead of having this macro directly in the dwc_otg_core_init(). This will let us configure the flag from DT or such later on, if needed. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org>
-
由 Marek Vasut 提交于
Pass the whole bulk of private data instead of just the regs, since the private data will soon contain important configuration flags. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org>
-
由 Enric Balletbo i Serra 提交于
Move CONFIG_SPL_TEXT_BASE down to 0x40200000 and set CONFIG_SPL_MAX_SIZE to (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE), so that it's clear what the limit is. This will also help some compilers to fit all the code into the allocated space. Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
-
- 03 5月, 2016 15 次提交
-
-
由 Andreas Bießmann 提交于
Commit 7a439cad broke generation of SPL loadable FIT images (CONFIG_SPL_LOAD_FIT). Fix it by removing the unnecessary storage of expected image type. This was a left over of the previous implementation. It is not longer necessary since the mkimage -b switch always has one parameter. Tested-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NAndreas Bießmann <andreas@biessmann.org>
-
由 Mario Six 提交于
I2C_RXTX_LEN from include/i2c.h is not defined if CONFIG_DM_I2C is enabled. This leads to a compilation error on boards that enable both CONFIG_CMD_EEPROM and CONFIG_DM_I2C. To avoid this, we define I2C_RXTX_LEN in cmd/eeprom.c if it is not already defined. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Fabio Estevam 提交于
mx6ul_evk does not come with a eMMC populated, so we should not define CONFIG_SUPPORT_EMMC_BOOT as it causes SPL to not be able to boot some brands of SD cards, such as SanDisk microSD HC - 8GB: U-Boot SPL 2016.05-rc1-28384-g108f8418 (Apr 19 2016 - 11:19:11) Trying to boot from MMC1 spl: mmc block read error SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### When CONFIG_SUPPORT_EMMC_BOOT is defined spl_boot_mode() returns MMCSD_MODE_EMMCBOOT, so remove this option to have a reliable boot via SD card. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Michal Simek 提交于
dtb is already included in binary that's why there is no need to replace u-boot-spl.bin with u-boot-spl-dtb.bin. This is only needed for OF_SEPARATE is enabled. Only copy -nodtb.bin version which is straight output from objcopy -O binary. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
There is an extra close() call which is not needed. Reported-by: Coverity (CID: 143065) Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Anatolij Gustschin 提交于
env library is broken as the config file pointer is only initialized in main(). When running in the env library parse_config() fails: Cannot parse config file '(null)': Bad address Ensure that config file pointer is always initialized. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
-
Since 770e68c0 BoneGreen is detected in board_late_init as board_name 'BBG1' Signed-off-by: NMatwey V. Kornilov <matwey.kornilov@gmail.com>
-
由 Vagrant Cascadian 提交于
Signed-off-by: NVagrant Cascadian <vagrant@debian.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Andreas Bießmann 提交于
I'll switch my mails to my own server, so drop all gmail references. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Andreas Bießmann 提交于
The getopt(3) optstring '-' is a GNU extension which is not available on BSD systems like OS X. Remove this dependency by implementing argument parsing in another way. This will also change the lately introduced '-b' switch behaviour. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
We need to be passing -T firmware here and aren't. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Ronald Zachariah 提交于
The function ext4fs_read_symlink was unable to handle a symlink which had target name of exactly 60 characters. Signed-off-by: NRonald Zachariah <rozachar@cisco.com> Signed-off-by: NStefan Roese <sr@denx.de> Reviewed-by: NStephen Warren <swarren@nvidia.com> Cc: Tom Rini <trini@konsulko.com>
-
由 Vagrant Cascadian 提交于
This reverts commit b5788dc0. Ram size is incorrectly reported as 512MB on a firefly-rk3288 board with 2GB of ram. Reverting this patch displays the full amount of ram. Signed-off-by: NVagrant Cascadian <vagrant@debian.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
-
由 Tom Rini 提交于
Unfortunately with this change we now are unable to do FS mode boots from MMC1 as with the way the code works today we will always load and assume that the hard-coded raw location contains U-Boot. Further, we cannot fix this by just changing other logic to try FS-then-RAW as it would also make us have to ignore what order the ROM is telling us to try. This reverts commit 22d90d56. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 02 5月, 2016 1 次提交
-
-
由 Tom Rini 提交于
We cannot change the long standing hard-coded offset for raw boot mode for everyone to accommodate how Android expects things to be done here. This reverts commit ef5ebe95. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 5月, 2016 4 次提交
-
-
由 Masahiro Yamada 提交于
The code in uniphier_sld3_sbc_init() is pin-muxing, so it would be a better fit in uniphier_sld3_early_pin_init(). Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
The System Bus is not available by default on the ROM boot mode of PH1-LD20. To use devices connected to the System Bus, such as the Micro Support Card, it is necessary to set up pin-muxing and some System Bus Controller register. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This is needed to use UART on SPL. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
PH1-LD20 does not have the dedicated boot swap select latch. Instead, it is controlled from the boot mode select. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 29 4月, 2016 2 次提交
-
-
- 28 4月, 2016 5 次提交
-
-
由 Martin Pietryka 提交于
The DMA was outputting the palette on the screen because the base for the DMA was not after the palette. In addition to that, the ceiling was also too high, this led that the output on the screen was shifted. NOTE: According to the TRM, even in 16/24bit mode a palette is required in the first 32 bytes of the framebuffer. See also: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/234967/834483#834483 "In this mode, the LCDC will assume all information is data and thus you need to ensure that the DMA points to the first pixel of data and not the first entry in the frame buffer which is the beginning of the 512 byte palette." Signed-off-by: NMartin Pietryka <martin.pietryka@chello.at> Reviewed-by: NHannes Schmelzer <oe5hpm@oevsv.at> Tested-by: NHannes Schmelzer <oe5hpm@oevsv.at>
-
由 Martin Pietryka 提交于
To support 16bpp we just need to change the raster_ctrl register accordingly. Also 32bpp mode should work as well, but was not tested. According to the TRM the uppermost byte will be ignored when LCD_TFT_24BPP_UNPACK is set. The switch logic is based on the Linux kernel tilcdc driver: drivers/gpu/drm/tilcdc/tilcdc_crtc.c: lines 407 through 419 (kernel was checked out at commit: bcc981e9ed8) Signed-off-by: NMartin Pietryka <martin.pietryka@chello.at> Reviewed-by: NHannes Schmelzer <oe5hpm@oevsv.at> Tested-by: NHannes Schmelzer <oe5hpm@oevsv.at>
-
由 Tom Rini 提交于
While the OMAP3 has 64KiB of SRAM, per the TRM the download area is only from 0x40200000 to 0x4020F000 and exceeding that will cause failure to boot. Further, we need to make sure that we don't run into SRAM_SCRATCH_SPACE_ADDR as once SPL is running we will write values there and would corrupt our running image. Cc: Adam Ford <aford173@gmail.com> Cc: Steve Sakoman <sakoman@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Hans de Goede 提交于
LDO3 is used for the VGA output, this fixes a regression where the VGA output on these boards would no longer work. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
We are running with the caches disabled when mctl_mem_matches gets called, but the cpu's write buffer is still there and can still get in the way, add a memory barrier to fix this. This avoids mctl_mem_matches always returning false in some cases, which was resulting in: U-Boot SPL 2015.07 (Apr 14 2016 - 18:47:26) DRAM: 1024 MiB U-Boot 2015.07 (Apr 14 2016 - 18:47:26 +0200) Allwinner Technology CPU: Allwinner A23 (SUN8I) DRAM: 512 MiB Where 512 MiB is the right amount, but the DRAM controller would be initialized for 1024 MiB. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
- 26 4月, 2016 8 次提交
-
-
由 Michal Simek 提交于
The patch: "configs: Re-sync almost all of cmd/Kconfig" (sha1: 78d1e1d0) doesn't remove empty if-endif. This patch is fixing it. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Masahiro Yamada 提交于
The recently added uniphier_ld20_defconfig missed the tree-wide re-sync by commit 89cb2b5f ("configs: Re-sync with cmd/Kconfig"). Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The defconfig/config.h file were merged but were already out of sync with mainline. This brings them further into line now. Cc: Richard Hu <richard.hu@technexion.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
由 Martin Pietryka 提交于
According to the TRM you have to set bits [21:20] to 0b10 for RAW mode, so (0x10 << 20) is obviously wrong here. Signed-off-by: NMartin Pietryka <martin.pietryka@chello.at>
-
由 Yoshinori Sato 提交于
The terminal condition in the area where a PCI device is scanned is wrong, and 1f.7 isn't scanned. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-