The SoCDK uses EMAC1, not EMAC0. This patch fixes the issue.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>

Commit 832472 "tools: socfpga: Add socfpga preloader signing
to mkimage" added tools/socfpga.c which relies on htole32,
le32toh and friends. While compiler.h includes these protypes
for linux from endian.h, it doesn't do so for FreeBSD. Hence
include <sys/endian.h> for FreeBSD.

Cc: Marek Vasut <marex@denx.de>
CC: Tom Rini <trini@ti.com>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Signed-off-by: NHeiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Signed-off-by: NBo Shen <voice.shen@atmel.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

We need to set the 'BE' flag here for things to work right.
Signed-off-by: NTom Rini <trini@ti.com>

remove the seldomly used EXT2 support because the U-Boot binary will
not fit into the 512KiB flash otherwise.
Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>

fix broken SPI access by adding/activating BOARD_EARLY_INIT_F
functionality and calling spi_init_f() from there.
Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>

Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>

Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>

Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>

Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>

A number of network related files were imported from the LiMon
project; these contain a somewhat unclear license statement:

	Copyright 1994 - 2000 Neil Russell.
	(See License)

I analyzed the source code of LiMon v1.4.2 which was used for this
import.  It does not contain any "License" file, but the top level
directory contains a file "COPYING", which turns out to be GPL v2
of June 1991.  So it is legitimate to conclude that the LiMon derived
files are also to be released under GPLv2.  Mark them as such.
Signed-off-by: NWolfgang Denk <wd@denx.de>

These boards have been orphaned for more than 6 months.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

These boards have been orphaned for more than 6 months.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

This board has been orphaned for more than 6 months.

It is the last board defining CONFIG_APM821XX.
The code inside #ifdef CONFIG_APM821XX should be removed too.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

This board has been orphaned for more than 6 months.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

These boards have been orphaned for more than 6 months.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

On OMAP platforms, SATA controller provides the SCSI subsystem
so implement scsi_init().

Get rid of the unnecessary sata_init() call from dra7xx-evm
and omap5-uevm board files.
Signed-off-by: NRoger Quadros <rogerq@ti.com>

Commit 12cc5437 'omap3: overo: Select
fdtfile for expansion board' wrongly missed the operator in the fdtfile
test. Update the test to only overwrite an empty fdtfile environment
variable.
Signed-off-by: NStefan Herbrechtsmeier <stefan@herbrechtsmeier.net>

SCIF of koelsch use external clock mode.
This enables external clock mode on koelsch board.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>

SCIF of lager use external clock mode.
This enables external clock mode on lager board.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>

The clock of SCIF (serial port) of lager is supplied from External
Clock. And value of clock is 14.7456MHz.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>

Enable this feature to support driver model before relocation.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Change this board to add a device tree.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Change this board to add a device tree.

This also adds a pinmux header file although it is not used as yet.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Most of the smdkv310 features are common with other exynos4 boards. To
permit easier addition of driver model support, use the common file and
add a device tree file.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Most of the arndale features are common with other exynos5250 boards. To
permit easier addition of driver model support, use the common file.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

These boards do not in fact have a Chrome OS EC, nor a TPS565090 PMIC, so
move the settings into a separate common file to be used by those that need
it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

A few things are common but are not in the common file. Fix this and
rename the file to fit with the other exynos*-common files.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Since exynos4 and exyno5 share many settings, we should move these into
a common file to avoid duplication.

In effect the changes are that all exynos boards now have EXT4 and FAT
write support. This affects exynos5250 and exynos5420 which previously
did not. This also disables the ext2 commands which are equivalent to
ext4 anyway.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

We want exynos5250-dt.h to be a board which can support any exynos5250
device. This matches the naming used by Linux. As a first step, rename
the existing -dt files to -common to make it clear they are common files,
and not specific boards.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

With the driver model conversion we are going to be using driver model for
SPI and not for I2C. This works OK so long as a board doesn't need both
dm and non-dm versions of the cros_ec driver. Since pit uses SPI and snow
uses I2C we need to split the configs so that only one driver is compiled
for each platform.

We can fix this later when driver model supports I2C.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Exynos 5250 boards (snow, spring) use the I2C driver but Exynos 5420 boards
cannot due to a hardware design decision. Select the correct driver to use
in each case.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Tested-by: NAjay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Things run faster when the data cache is enabled, so turn it on along with
the 'dcache' command.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Tested-by: NAjay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Support reading/writing ext4 partitions.
Signed-off-by: NKevin Mihelich <kevin@archlinuxarm.org>
Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com>

Enable 'fastboot' command.

This is currently enabled but not yet functional. Including it in the
configuration will ease further testing and development as discussed
on the mailing list.
Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com>

Enable the 'gpio' command to allow reading and toggling of GPIO
pins.
Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com>

Some users (QNX and Windows CE users in particular) have asked
to disable the Penguin shown on the display at boot time.
Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com>
Acked-by: NStefano Babic <sbabic@denx.de>

Increase the maximum number of arguments allowed by the Hush parser.
This prevents errors when users or scripts aren't quoting parameters
when setting the "bootargs" variable et al.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com>

Enable the "i2c edid" command to query data from an attached
HDMI monitor.

Usage is typically this:

        U-Boot > i2c dev 1
        U-Boot > i2c edid 0x50
        ...
Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com>