- 19 7月, 2014 14 次提交
-
-
由 Jeroen Hofstee 提交于
Remove self assignments which is just dead code to prevent compiler warnings about non used arguments. For u-boot this does not prevent any warning though, on the contrary it actual introduces warnings when compiling with clang. Remove them. Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
use weak instead of alias to prevent some clang warnings. Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
pack_hex_byte is only used when CONFIG_CMD_NET is defined so limit it to that scope. This prevents a clang warning. Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
When static inline is used in a header file the function should preferably be inlined and if not possible made a static function. When declared inside a c file there is a static function, which might be inlined. Since SPL uses a define to declare the static inline it becomes part of the c file although it is declared in a header and clang will warn that you have introduced unused static functions. Add maybe_unused to prevent such warnings. Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
This prevents a clang warning. Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
This not only looks a bit better it also prevents a warning with W=1 (no previous prototype). Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Jeroen Hofstee 提交于
This not only looks a bit better it also prevents a warning with W=1 (no previous prototype). Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
This not only looks a bit better it also prevents a warning with W=1 (no previous prototype). cc: agust@denx.de Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
lists.c / root.c do not include their own header and they could potentially implement a different function. Therefore actually include the headers. cc: sjg@chromium.org Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Jeroen Hofstee 提交于
First of all this looks a lot better, but it also prevents a gcc warning (W=1), that the weak function has no previous prototype. cc: Simon Glass <sjg@chromium.org> Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Jeroen Hofstee 提交于
Since most commands are not public, make them static. This prevents warnings that no common prototype is available. Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
Include the function its prototype to prevent the warning that it has no prototype. Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
clang warns this check is silly; it is since s is a local variable. u-boot/drivers/mtd/cfi_flash.c:2363:13: warning: comparison of array 's' not equal to a null pointer is always true else if ((s != NULL) && (strcmp(s, "yes") == 0)) { cc: Stefan Roese <sr@denx.de> Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
- 15 7月, 2014 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-
- 14 7月, 2014 4 次提交
-
-
由 Pavel Machek 提交于
Timer on cyclone5 actually counts down. It took me a while to figure out, as timer counting in wrong direction actually _can_ be used, it just appears to tick at extremely high frequency in u-boot. The bug was introduced in commit 23ab7ee0. Signed-off-by: NPavel Machek <pavel@denx.de> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Lokesh Vutla 提交于
Update the board_name env variable and accordingly populate the dtb file. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Masahiro Yamada 提交于
In the previous commit, all the board fields were filled. Now we can use "-" in the board field for a different meaning. Going forward, "-" stands for no board directory as in cpu, soc, vendor fields. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
The boards.cfg file has allowed to use "-" for the board (= 6th) field if the board name is the same as the 7th field. But I notice one problem. Because tools/reformat.py sorts the lines in the simple alphabetical order (= the order of character code), some entries for the same board are not lined up together. For example, "bf527-ezkit" and "bf527-ezkit-v2" share the same board. But they are located separately because "bf527-ezkit" fills the board field with "-" whereas "bf527-ezkit-v2" specifies it explicitely. The similar things can be seen: - between "trizepsive" and "polaris" - between "RRvision" and "RRvision_LCD" - between "korat" and "korat_perm" - between "lwmon5" and "lcd4_lwmon5" This commit was generated by the following command: awk '$6 == "-" { $6 = $7 } { print }' boards.cfg \ | tools/reformat.py -i -d '-' -s 8 > boards0.cfg; \ mv boards0.cfg boards.cfg Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 12 7月, 2014 1 次提交
-
-
- 10 7月, 2014 3 次提交
-
-
由 Eric Nelson 提交于
The pad settings for DISP0_DATA02 and DISP0_DAT10 were not set in the same way as DISP0_DAT00-23, causing much flicker in parallel RGB displays on Dual-Lite and Solo processors. These settings now match the i.MX6 Dual and Quad core versions. Note that this fixes a regression in commit b47abc36 and that this is the second time we've had a regression on these two pads (See commit e654ddf7). Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com> Acked-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Felipe Balbi 提交于
Newer AM437x silicon requires us to explicitly power up the USB2 PHY. By implementing usb_phy_power() we can achieve that. Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Felipe Balbi 提交于
some boards won't work if the PHY isn't explicitly powered up. Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 09 7月, 2014 11 次提交
-
-
由 Michal Simek 提交于
This is a MIME GnuPG-signed message. If you see this text, it means that your E-mail or Usenet software does not support MIME signed messages. The Internet standard for MIME PGP messages, RFC 2015, was published in 1996. To open this message correctly you will need to install E-mail or Usenet software that supports modern Internet standards. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Lokesh Vutla 提交于
Updating omap4_sdp/panda and omap5_uevm maintainer. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Acked-by: NR Sricharan <r.sricharan@ti.com>
-
-
由 Fabio Estevam 提交于
Commit 3d622b78 (mx6: soc: Introduce set_ldo_voltage()) introduces set_ldo_voltage() function that can be used to set the voltages of any of the three LDO regulators controlled by the PMU_REG_CORE register. Prior to this commit there was a single set_vddsoc() which only configured the VDDSOC regulator. Update the comments to align with the new set_ldo_voltage() implementation. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Andre Renaud 提交于
DIV_SELECT is used as Fout = Fin * div_select / 2.0, so we should do the shift after the multiply to avoid rounding errors Signed-off-by: NAndre Renaud <andre@bluewatersys.com>
-
由 Lothar Rubusch 提交于
Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NLothar Rubusch <lothar@denx.de> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Marek Vasut 提交于
Adjust the mtdparts settings to allow for alternative boot images and for using UBI. Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de>
-
由 Marek Vasut 提交于
- "env ask", "env grep" and "setexpr" are needed for commissioning - add support for ext4 file systems - adjust default environment to use ext4 commands - add write support for (V)FAT and EXT4 - add bitmap and splashscreen support - print timestamp information for images Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de>
-
由 Lothar Rubusch 提交于
Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NLothar Rubusch <lothar@denx.de>
-
由 Marek Vasut 提交于
Adjust the mtdparts to also consider factory-programmed config block. Signed-off-by: NMarek Vasut <marex@denx.de>
-
由 Marek Vasut 提交于
- "env ask", "env grep" and "setexpr" are needed for commissioning - add support for ext4 file systems - adjust default environment to use ext4 commands - add write support for (V)FAT and EXT4 - add bitmap and splashscreen support - print timestamp information for images Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
-
- 08 7月, 2014 6 次提交
-
-
-
由 Tyler Baker 提交于
The following patch re-enables the dhcp functionality on omap3_beagle. It was removed with df4dbb5d when omap3_beagle was converted to use ti_omap3_common.h. I have tested beagleboard and beagleboard-xm with this patch and confirmed dhcp is working. Signed-off-by: NTyler Baker <tyler.baker@linaro.org>
-
由 Alexey Ignatov 提交于
Fixes a bug when objcopy doesn't put .dtb.init.rodata section to resulting u-boot.bin, so u-boot was unable to find embedded DTB.
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Acked-by: NHans de Goede <hdegoede@redhat.com>
-
由 Dirk Eibach 提交于
sha256 has some beefy memory footprint. Make it optional for constrained systems. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
Commit "2842c1c2 fit: add sha256 support" badly increased memory footprint, so some of our boards did not build anymore. Since monitor base must not be changed I removed some commands to save memory. Maybe making sha256 optional for fit would be an option for the future since it really has some beefy footprint. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-