- 29 7月, 2020 25 次提交
-
-
由 Simon Glass 提交于
When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
At present only the ARMv7 tegra SoCs actually use binman to create an image. Change the config to reflect this, since otherwise running binman will produce an error. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This has been in the Makefile long enough to ensure migration is complete. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a simple binman config and enable CONFIG_HAS_ROM so that U-Boot produces a ROM for bob. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a simple binman config and enable CONFIG_HAS_ROM so that U-Boot produces a ROM for jerry. Change the binman image definition to support multiple images, since it may be used to build both u-boot-rockchip.bin and u-boot.rom Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update the config for chromebook_bob to support booting from SPI flash. The existing SPL size is too small since ATF is needed, so double it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This option allows the serial console to work correctly. Add it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Some non-x86 devices can use SPI flash to boot and need to produce images of a fixed size to program the flash. Add a way to handle this for non-x86 boards. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Bob is a Chromebook and can boot from SPI flash. Add it to the condition check for this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Most x86 boards build a u-boot.rom which is programmed into SPI flash. But this is not unique to x86. For example some rockchip boards can also boot from SPI flash. Also, at least on x86, binary blobs are sadly quite common. It is not possible to build a functional image without them, and U-Boot needs to know this at build time. Introduce a new CONFIG_HAS_ROM option which selects whether u-boot.rom is built and a new CONFIG_ROM_NEEDS_BLOBS option to indicate whether binary blobs are also needed. If they are not needed, it is safe to build the ROM always. Otherwise we still require the BUILD_ROM environment variable. For now this affects only x86, but future patches will enable this for rockchip too. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
It is interesting to note the number of builds completed per second to track machine performance and build speed. Add a 'rate' value at the end of the build to show this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This current fails with an error. Fix it. Signed-off-by: NSimon Glass <sjg@chromium.org> Fixes: 7664b03f ("buildman: Remove _of_#_ from results directory paths")
-
由 Simon Glass 提交于
Older versions of this script don't support the -q flag. Since buildman runs this script from when it starts, we may get the old version. Fix this in two ways: 1. Use the version from the same tree as buildman is run from, if available 2. Failing that, allow the -q flag to be missing Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Oppenlander 提交于
Linux distributions generally use the "make defconfig && make tools-all" recipe to generate a uboot-tools (or similar) package. This patch enables FIT cipher support in the default mkimage build. Signed-off-by: NPatrick Oppenlander <patrick.oppenlander@gmail.com>
-
由 Walter Lozano 提交于
Add an additional test to dtoc in order improve the coverage, specifically to take into account the case of unicode error when scanning drivers. Signed-off-by: NWalter Lozano <walter.lozano@collabora.com>
-
由 Tom Rini 提交于
- Migration of more symbols to Kconfig
-
由 Peng Fan 提交于
Done with: ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS -H Signed-off-by: NPeng Fan <peng.fan@nxp.com> [trini: A few more migrations] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Peng Fan 提交于
Add SPL_LOAD_FIT_ADDRESS to make user could add it in defconfig Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_SYS_MMCSD_FS_BOOT_PARTITION Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
BOOTP_DEFAULT is defined in several boards, but this config option is never checked or used. This patch removes this config option from config files and the whitelist.txt Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_BOOTP_SEND_HOSTNAME Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_DRIVER_TI_EMAC_USE_RMII Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 28 7月, 2020 10 次提交
-
-
由 Tom Rini 提交于
- Update Azure to fix some recent issues with Windows host tool builds
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Bin Meng 提交于
Recent CI failures were seen [1] when building MSYS2 Windows host tools. The error messages are something like: downloading mingw32.db... downloading mingw32.db.sig... error: mingw32: key "4A6129F4E4B84AE46ED7F635628F528CF3053E04" is unknown error: mingw32: signature from "David Macek <david.macek.0@gmail.com>" is unknown trust error: failed to update mingw32 (invalid or corrupted database (PGP signature)) Per the MSYS2 official news [2], this was caused by a packager switch and several solutions were suggested, e.g.: a new package of msys2-keyring and a new msys2 installer that includes them are released. However right now we have been using the MSYS2 github CI base repo [3] for the MSYS2 build in U-Boot, but per the project information on the github webpage, it says: "This repository is unused/deprecated and will be remove after 2021-01-01". Since it is unmaintained it's unlikely the new PGP keys will be included in the git repo, and the only choice is to switch to use the MSYS2 official installer as the CI base instead. [1] https://dev.azure.com/u-boot/u-boot/_build/results?buildId=975 [2] https://www.msys2.org/news/#2020-06-29-new-packagers [3] https://github.com/msys2/msys2-ci-baseSigned-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
Package 'flex' is needed when building the U-Boot host tool, but is currently missing in the build dependency in the CI pipeline. This is to prepare switching to an installer based CI build. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
As of 2020-05-17, 32-bit MSYS2 is no longer actively supported by the upstream [1]. Let's drop the 32-bit Windows host tool build. [1] https://www.msys2.org/news/#2020-05-17-32-bit-msys2-no-longer-actively-supportedSigned-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
This simplifies things a bit to just use a login shell everywhere. This keeps in sync with MSYS2 upstream commit: 9d11b7f0aa93 ("azure-pipelines: simplify things a bit"). Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic由 Tom Rini 提交于
- Handle errors in Meson serial driver - Enable HDMI, keyboard and ADC for Odroid-C2
-
https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq由 Tom Rini 提交于
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
-
由 Tom Rini 提交于
With the migration to python3 for all of our tests, we need to install pyelftools via pip now rather than the system tools as they will otherwise not be present in our virtualenv. Signed-off-by: NTom Rini <trini@konsulko.com> --- Changes in v2: Switch to pip
-
- 27 7月, 2020 5 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-dm由 Tom Rini 提交于
binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
-
由 Anand Moon 提交于
Enable options to permit HDMI output on Odroid-C2 GXBB boards. Enable VPU Power Domain. Enable ADC and USB_KERBOARD. Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NAnand Moon <linux.amoon@gmail.com>
-
由 Neil Armstrong 提交于
This checks and handles RX errors on the Amlogic UART controller after experiencing errors on the Khadas VIM3 & VIM3L when UART AO A lines are not connected. When the RX line is not connected, the first byte is erroneous and breaks the U-Boot autoboot, breaking automatic boot. This checks and drops any erroneous RX byte on pending and getc callbacks to avoid returning true to pending when an error byte is in the FIFO. Fixes: bfcef28a ("arm: add initial support for Amlogic Meson and ODROID-C2") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Tested-by: NGuillaume La Roque <glaroque@baylibre.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-sh由 Tom Rini 提交于
- R8A774A1 / Beacon EmbeddedWorks RZG2M Dev Kit support
-
-