- 11 9月, 2008 3 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 10 9月, 2008 18 次提交
-
-
由 Heiko Schocher 提交于
Also set up the port pins for using I2C. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Petri Lehtinen 提交于
When not using hush, the autoscr command now executes lines that are only one character long. It also runs the last line of scripts even if it does not end in a newline. Signed-off-by: NPetri Lehtinen <petri.lehtinen@inoi.fi>
-
由 Victor Gallardo 提交于
On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands and glacier. Signed-off-by: NVictor Gallardo <vgallardo@amcc.com>
-
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Andrew Klossner 提交于
Fix printf format-string/arg mismatches under -DDEBUG. These warnings occur with DEBUG defined for a platform using cpu/mpc85xx. Users of other architectures can unearth similar problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right after "CFLAGS += $(call cc-option,-fno-stack-protector)". Signed-off-by: NAndrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Kumar Gala 提交于
The e500um says the timebase is volatile out of reset. To ensure TB sync works we need to make sure its zero. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
print load_end value not pointer Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
...as done in image.c Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Markus Heidelberg 提交于
Signed-off-by: NMarkus Heidelberg <markus.heidelberg@web.de>
-
由 Markus Heidelberg 提交于
Signed-off-by: NMarkus Heidelberg <markus.heidelberg@web.de>
-
由 Yoshihiro Shimoda 提交于
Fix the problem that cannot work RTL8169 on sh7785lcr board. Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
-
由 Andy Fleming 提交于
-
由 TsiChung Liew 提交于
Add MTD SPI Flash support for M25P16, M25P20, M25P32, M25P40, M25P64, M25P80, M25P128. Signed-off-by: NJason McMullan <mcmullan@netapp.com> Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>
-
- 09 9月, 2008 19 次提交
-
-
由 Wolfgang Denk 提交于
We must link with libgeneric now. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Ryan CHEN 提交于
The patch is that check if usb_get_dev_index() function return valid pointer. If valid, continue. Otherwise return -1. Signed-off-by: NRyan Chen <ryan.chen@st.com> Acked-by: NMarkus Klotzbuecher <mk@denx.de>
-
由 Remy Bohmer 提交于
A recent commit (936897d4) enabled the usb_stop() command in common/cmd_bootm.c which was not enabled for some time, because no board did actually set the CFG_CMD_USB flag. So, now the usb_stop() is executed before loading the linux kernel. However, the usb_ohci driver hangs up (at least on AT91SAM) if the driver is stopped twice (e.g. the peripheral clock is stopped on AT91). If some other piece of code calls usb_stop() before the bootm command, this command will hangup the system during boot. (usb start and stop is typically used while booting from usb memory stick) But, stopping the usb stack twice is useless anyway, and a flag already existed that kept track on the usb_init()/usb_stop() calls. So, we now check if the usb stack is really started before we stop it. This problem is now fixed in both the upper as low-level layer. Signed-off-by: NRemy Bohmer <linux@bohmer.net> Acked-by: NMarkus Klotzbuecher <mk@denx.de>
-
由 Wolfgang Denk 提交于
-
由 Ricardo Ribalda Delgado 提交于
This patch solves the problems compiling ml507, v5fx30teval and ppc440-generic out of tree. Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@uam.es>
-
Fix output of the usb storage command. It was printing "Device 0: not available" because IF_TYPE_USB was not included into the switch statement. Signed-off-by: NNicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
-
由 Bartlomiej Sieka 提交于
Signed-off-by: NBartlomiej Sieka <tur@semihalf.com>
-
由 Bartlomiej Sieka 提交于
- add function fit_all_image_check_hashes() that verifies if all hashes of all images in the FIT are valid - improve output of fit_image_check_hashes() when the hash check fails Signed-off-by: NBartlomiej Sieka <tur@semihalf.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Peter Tyser 提交于
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Kumar Gala 提交于
Pantelis Antoniou stated: AFAIK, it is still used but the products using PPC are long gone. Nuke it plz (from orbit). So remove it since it cleans up a usage of env_get_char outside of the environment code. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Wolfgang Denk 提交于
Several source files need to be compiled and linked when one or more config options are selected. To allow for easy selection in the Makefiles yet to avoild multiple compilation (which costs build time) and especially multiple linking (which causes errors), we use "COBJS = $(sort COBJS-y)" which eliminates duplicates. By courtesy of Detlev Zundel who suggested this approach. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Andreas Engel 提交于
Signed-off-by: NAndreas Engel <andreas.engel@ericsson.com>
-
由 Andreas Engel 提交于
They only differ in the init function. This also adds the missing watchdog support for the PL011. Signed-off-by: NAndreas Engel <andreas.engel@ericsson.com>
-
由 Ricardo Ribalda Delgado 提交于
SREC files do not need gap fill: The load address is specified in the file. On the other hand, it can't be avoided in a .bin object. It has no information about memory location. Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@uam.es>
-
由 Markus Heidelberg 提交于
Signed-off-by: NMarkus Heidelberg <markus.heidelberg@web.de>
-
由 Graeme Russ 提交于
Attempt to bring i386 / sc520 inline with master Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>
-
由 Guennadi Liakhovetski 提交于
Add support for environment in NAND with automatic NOR / NAND recognition, including unaligned environment, bad-block skipping, redundant environment copy. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-