- 16 3月, 2013 15 次提交
-
-
由 Simon Glass 提交于
This adds ppc features to the generic pre-relocation board init. This is a separate commit so that these features are clearly shown. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Link symbols as created by the link script can either be absolute or relative to the text start. This option switches between the two options so that we can support both. As we convert architectures over to generic board, we can see if this option is actually needed, or whether it is possible to unify this feature also. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This enables generic board support so that ARM boards can define CONFIG_SYS_GENERIC_BOARD. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These boards define CONFIG_LAST_STAGE_INIT and CONFIG_BOARD_EARLY_INIT_R but these options are not available on ARM. Move them into the powerpc common file instead. This change affects: km_kirkwood_pci, mgcoge3un, kmnusa, kmcoge5un, km_kirkwood and portl2. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This adds secondary program loader support to the generic board. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This file handles common post-relocation init for boards which use the generic framework. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This file handles common pre-relocation init for boards which use the generic framework. It starts up the console, DRAM, performs relocation and then jumps to post-relocation init. Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NWolfgang Denk <wd@denx.de> Acked-by: NWolfgang Denk <wd@denx.de>
-
由 Simon Glass 提交于
These functions are only available for powerpc and are not declared in a header file. We want to use the rest function in two places (board_f and board_r), so declare the functions in watchdog.h. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We are introducing a new unified board setup. Add a check to make sure that board config files do not define CONFIG_SYS_GENERIC_BOARD unless their architecture defines __HAVE_ARCH_GENERIC_BOARD __HAVE_ARCH_GENERIC_BOARD will currently not be the default setting, but we can switch this later when most architecture support generic board. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This library supports calling a list of functions one after the other. It is intended that we move to a more powerful initcall implementation as proposed by Graeme Russ <graeme.russ@gmail.com>. For now, this allows us to do the basics. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We can use the declarations of __bss_start and _end from this header instead of declaring them locally. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Include this header to get access to link symbols, which are otherwise removed. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We create a separate header file for link symbols defined by the link scripts. It is helpful to have these all in one place and try to make them common across architectures. Since Linux already has a similar file, we bring this in even though many of the symbols there are not relevant to us. Each architecture has its own asm/sections.h where symbols specifc to that architecture can be added. For now everything except AVR32 just includes the generic header. One change is needed in arch/avr32/lib/board.c to make this conversion work. Reviewed-by: Tom Rini <trini@ti.com> (version 5) Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Note this is a tree-wide change affecting multiple architectures. At present we use __bss_start, but mostly __bss_end__. This seems inconsistent and in a number of places __bss_end is used instead. Change to use __bss_end for the BSS end symbol throughout U-Boot. This makes it possible to use the asm-generic/sections.h file on all archs. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This file holds the board info structure. We need this to be generic for the unified board series, so create a structure which contains the basic fields required by the main architectures. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 13 3月, 2013 7 次提交
-
-
由 Rajeshwari Shinde 提交于
This patch corrects the following issues 1) Write the correct M/T Stop value to I2CSTAT after i2c write. According to the spec, after finish the data transmission, we should write a M/T Stop (I2C_MODE_MT | I2C_TXRX_ENA) to I2CSTAT instead of a M/R Stop (I2C_MODE_MR | I2C_TXRX_ENA). 2) Not split the write to I2CSTAT into 2 steps in i2c read. According to the spec, we should write the combined M/R Start value to I2CSTAT after setting the slave address to I2CDS 3) Fix the mistake of making an equality check to an assignment. In the case of I2C write with the zero-length address, while tranfering the data, it should be an equality check (==) instead of an assignment (=). Signed-off-by: NTom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
-
由 Rajeshwari Shinde 提交于
This revomes the code under #if 0 in the s3c24x0_i2c driver. Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com> Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
mem_test_quick and mem_test_alt functions are only called by do_mem_mtest, so move them under the #ifdef Signed-off-by: NTom Rini <trini@ti.com>
-
由 Joe Hershberger 提交于
Because the code that handles bootdelay is compiled in conditionally based on the default value, you are restricted in the default, regardless of what you want the runtime options to be. Change the source to always check if any default is given so that other values can be selected and used at runtime. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Barak Wasserstrom 提交于
When using $fdtaddr in $bootcmd and $bootcmd is automatically called, $fdtaddr is yet not defined. Signed-off-by: NBarak Wasserstrom <wbarak@gmail.com>
-
由 Wolfgang Denk 提交于
The "env ask" traditionally uses a somewhat awkward syntax: env ask name [message ...] [size] So far, when a mesage was given, you always also had to enter a size. If you forgot to do that, the command would terminate without any indication of the problem. To avoid incompatible changes of the interface, we now check the last argument if it can be converted into a decimal number. If this is the case, we assume it is a size; otherwise we treat it as part of the message. Also, add a space after the message fore easier reading, and clean up help mesage. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Tom Rini 提交于
When using the partial read feature of fatwrite the buffer we read into can become unaligned not just due to initial location but the size of our partial reads as well. Make this clear in the help text. Signed-off-by: NTom Rini <trini@ti.com>
-
- 12 3月, 2013 13 次提交
-
-
由 Lubomir Rintel 提交于
In certain cases, memory device is present as flat file or block device (via mmc or mtdblock layer). Do not attempt MTD operations against it. Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
-
由 Robert P. J. Day 提交于
Nothing appears to use or compile cmd_df.c anymore. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Joe Hershberger 提交于
That's a bit presumptuous of you, u-boot! Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Kim Phillips 提交于
i.e., from the linux kernel's commit be987d9f80354e2e919926349282facd74992f90 Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Kim Phillips 提交于
without this, patches don't get checked for proper alignment, and e.g., for spaces after a cast and/or before a semicolon. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Stephen Warren 提交于
The core implementation of "help" already prints the command name before the help text of a specific command. Remove it from part's own help text to avoid it being printed twice: Tegra114 (Dalmore) # help part part - disk partition related commands Usage: part part uuid <interface> <dev>:<part> - print partition UUID ... Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
由 Andreas Bießmann 提交于
ps on BSD hosts (like OS X) do not provide the --no-headers switch nor understand the AIX format descriptions. Unfortunately there seems no solution to get the PIDs of children in a platfrom independent manner. Therefore detect the OS and decide upon that which way to go. This patch makes the MAKEALL script cleanly stoppable on bare OS X when using the parallel builds of targets. Additionally this patch removes double call to grep by a single call to sed for GNU style child PID detection. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Gray Remlin 提交于
Signed-off-by: NGray Remlin <gryrmln@gmail.com>
-
由 Stefan Roese 提交于
These boards seem to be unmaintained for quite some time. So lets remove support for them completely. This also cleans up some common drivers/files. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Guillaume Alexandre <guillaume.alexandre@gespac.ch> Acked-by: NWolfgang Denk <wd@denx.de>
-
由 Andreas Bießmann 提交于
This patch adds whitespace to the printed hex numbers to have an aligned ASCII printout at the end of the line. This changes for example the md output from: ---8<--- OMAP3 Tricorder # md.l $loadaddr 5 82000000: 30200109 20a4028c 90010000 08a00000 .. 0... ........ 82000010: 01010000 .... --->8--- to ---8<--- OMAP3 Tricorder # md.l $loadaddr 5 82000000: 30200109 20a4028c 90010000 08a00000 .. 0... ........ 82000010: 01010000 .... --->8--- The cost of this is about 72 byte .text increase (tested with at91 build). Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Wolfgang Denk 提交于
The "mtest" command is of little practical use (if any), and experience has shown that a large number of board configurations define useless or even dangerous start and end addresses. If not even the board maintainers are able to figure out which memory range can be reliably tested, how can we expect such from the end users? As this problem comes up repeatedly, we rather do not enable this command by default, so only people who know what they are doing will be confronted with it. As this changes the user interface, we allow for a grace period before this change takes effect. For now, we make "mtest" configurable through the CONFIG_CMD_MEMTEST variable, which is defined in include/config_cmd_default.h; we also add an entry to doc/feature-removal-schedule.txt which announces the removal of this default setting in two releases from now, i. e. with v2013.07. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Tom Rini <trini@ti.com>
-
- 10 3月, 2013 1 次提交
-
-
- 09 3月, 2013 4 次提交
-
-
由 Holger Brunck 提交于
All boards from this serie uses i2c. So we can drop these unneeded defines. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
-
由 Holger Brunck 提交于
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
-
由 Anatolij Gustschin 提交于
ft_cpu_setup() already does memory node fixup, no need to do it again. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Do maintain a 200 usecs period of stable power and clock before asserting the CKE signal and sending commands, have at least 200 DRAM clock cycles pass after initialization before data access. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-