- 19 11月, 2015 4 次提交
-
-
由 Thomas Chou 提交于
Add CMD_GPIO to Kconfig and run tools/moveconfig.py . Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Nikita Kiryanov 提交于
Currently the mmc device that SPL looks at is always mmc0, regardless of the BOOT_DEVICE_MMCx value. This forces some boards to implement hacks in order to boot from other mmc devices. Make SPL take into account the correct mmc device. Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Nikita Kiryanov 提交于
Use spl alternate boot device feature to define fallback to the main boot device as it is defined by hardware. Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Nikita Kiryanov 提交于
Make spl_*_load_image() functions return a value instead of hanging if a problem is encountered. This enables main spl code to make the decision whether to hang or not, thus preparing it to support alternative boot devices. Some boot devices (namely nand and spi) do not hang on error. Instead, they return normally and SPL proceeds to boot the contents of the load address. This is considered a bug and is rectified by hanging on error for these devices as well. Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Jagan Teki <jteki@openedev.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 18 11月, 2015 15 次提交
-
-
由 Kipisz, Steven 提交于
BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does actually support two different platform configuration offered by TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728 (or more commonly known as AM5728-evm). Information about the TI AM57xx EVM can be found here http://www.ti.com/tool/tmdxevm5728 The EVM configuration is 1-1 compatible with BeagleBoard X15 with the additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering. Hence, we rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. This sets the stage to have a common u-boot image solution for multiple TI EVMs such as that already done for am335x and am437x. This sets the stage for upcoming multiple TI EVMs that share the same code base. NOTE: Commit eae7ae18 ("am437x: Add am57xx_evm_defconfig using CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm platform name. However, this ignored the potential confusion arising for users as a result. To prevent this, existing beagle_x15_defconfig is renamed as am57xx_evm_nodt_defconfig to denote that this is the "non device tree" configuration for the same platform. We still retain am57xx-beagle-x15.dts at this point, since we just require the common minimum dts. As a result of this change, users should expect changes in build procedures('make am57xx_evm_nodt_defconfig' instead of 'make beagle_x15_defconfig'). Hopefully, this would be a one-time change. Signed-off-by: NSteve Kipisz <s-kipisz2@ti.com> Signed-off-by: NSchuyler Patton <spatton@ti.com> Acked-by: NNishanth Menon <nm@ti.com> Acked-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Luka Perkov 提交于
These options were already defined in mv-common.h file. Signed-off-by: NLuka Perkov <luka.perkov@sartura.hr>
-
由 Luka Perkov 提交于
It is already defined in included mv-common.h file. Signed-off-by: NLuka Perkov <luka.perkov@sartura.hr>
-
由 Luka Perkov 提交于
Signed-off-by: NLuka Perkov <luka.perkov@sartura.hr>
-
由 Luka Perkov 提交于
The CONFIG_CMD_ENV is enabled by default so we can safely remove it. Signed-off-by: NLuka Perkov <luka.perkov@sartura.hr>
-
由 Luka Perkov 提交于
Avoid double typing in the shell and build u-boot.kwb when running "make" only. Signed-off-by: NLuka Perkov <luka.perkov@sartura.hr>
-
由 Luka Perkov 提交于
Mainline kernel for this device has only support for device tree. We can safely drop this legacy code. Signed-off-by: NLuka Perkov <luka.perkov@sartura.hr>
-
由 Quentin Armitage 提交于
Create include/configs/mv-plug-common.h for common definitions for Sheevaplug, Guruplug and Dreamplug. This will make it easier to ensure the built u-boots stay in track with each other Signed-off-by: NQuentin Armitage <quentin@armitage.org.uk>
-
由 Quentin Armitage 提交于
CONFIG_DISPLAY_CPUINFO is already defined in mv-common.h Signed-off-by: NQuentin Armitage <quentin@armitage.org.uk>
-
由 Quentin Armitage 提交于
Cosmetic: CONFIG_OF_LIBFDT was in a different position in the config file for the Dreamplug, compared to the Sheevaplug and Guruplug. Signed-off-by: NQuentin Armitage <quentin@armitage.org.uk>
-
由 Quentin Armitage 提交于
include/configs/mv-common.h brings in the required filesystems if CONFIG_SYS_MVFS is defined, so use it for Sheevaplug and Guruplug. Signed-off-by: NQuentin Armitage <quentin@armitage.org.uk>
-
由 Quentin Armitage 提交于
For Marvell plugs, move the configuration of DHCP, NAND/SF, PING and USB commands, and HUSH_PARSER into the _defconfig file, rather than the include/configs/*plug.h files. This avoids compiler warnings of duplicate definitions if the option is selected in the .config, but also defined in the include/configs/*plug.h file. Signed-off-by: NQuentin Armitage <quentin@armitage.org.uk>
-
由 Quentin Armitage 提交于
include/configs/guruplug.h defined CONFIG_CMD_FAT twice. Signed-off-by: NQuentin Armitage <quentin@armitage.org.uk>
-
由 Quentin Armitage 提交于
The Marvell plugs are very similar systems, and so it makes sense for their u-boots to have the same commands/configuration. Add EXT4 and MII to Dreamplug, DATE to Guruplug and Sheevaplug. Add CONFIG_SYS_ALT_MEMTEST to Sheevaplug. There are still command differences around NAND, SPI/NOR. Also default to building u-boot.kwb for Sheevaplug and Guruplug. Signed-off-by: NQuentin Armitage <quentin@armitage.org.uk>
-
由 Alexey Brodkin 提交于
With this change Synopsys DesignWare SDP board is switched to driver model for both serial port (serial_dw) and Ethernet (Designware GMAC). This simplifies include/configs/axs101.h and allows for reuse of Linux's Device Tree description. For simplicity Linux's .dts files are not blindly copied but only very few extracts of them are really used (those that are supported in U-Boot at the moment). Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
-
- 16 11月, 2015 3 次提交
-
-
由 Nikita Kiryanov 提交于
Add support for loading splashimage from filesystem formatted sata storage. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
-
由 Nikita Kiryanov 提交于
Add support for loading splash image from USB drive formatted with a filesystem. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
-
由 Nikita Kiryanov 提交于
Add support for loading splash image from an SD card formatted with a filesystem. Update boards to maintain original behavior where needed. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
-
- 13 11月, 2015 18 次提交
-
-
由 Bin Meng 提交于
commit c3c016cf "sf: Add SPI NOR protection mechanism" introduced flash_lock()/flash_unlock()/flash_is_locked() methods for SPI flash, but not every flash driver supplies these. We should test these methods against NULL before actually calling them. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NJagan Teki <jteki@openedev.com>
-
由 Bin Meng 提交于
CONFIG_SYS_EARLY_PCI_INIT is not needed any more since with driver model, PCI enumeration is automatically triggered. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
These are leftover when converted to use driver model pci. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Move to driver model for pci on QEMU. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Move chipset-specific codes such as PAM init, PCIe ECAM and MP table from pci.c to qemu.c, to prepare for DM PCI conversion. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Add Kconfig options for 8259 and 8254. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Rename pcat_timer.c to i8254.c and pcat_interrupts.c to i8259.c, to match their header file names (i8254.h and i8259.h). Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
CONFIG_SYS_NUM_IRQS is actually not something we can configure, but an architecture defined number of ISA IRQs. Move it from x86-common.h to asm/interrupt.h and rename it to SYS_NUM_IRQS. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stefano Babic 提交于
wandboard and mx6cuboxi have warnings because BOOT_DELAY is defined twice. Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Vagrant Cascadian <vagrant@debian.org> CC: Otavio Salvador <otavio@ossystems.com.br> CC: Fabio Estevam <fabio.estevam@freescale.com>
-
由 Daniel Hellstrom 提交于
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Daniel Hellstrom 提交于
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Francois Retief 提交于
Add an initr function in the board_r.c file for the AMBA Plug&Play command. Add a Kconfig entry for the ambapp command and remove all CONFIG_CMD_AMBAPP defines from the board configuration headers. Add a Kconfig entry to display the AMBA Plug&Play information on startup. This option is off by default. Remove relevent define from board configuration headers. Signed-off-by: NFrancois Retief <fgretief@spaceteq.co.za>
-
由 Daniel Hellstrom 提交于
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Francois Retief 提交于
Update the GRSIM board with the memory settings for the evaluation version of TSIM. This free version of TSIM is used for testing. Signed-off-by: NFrancois Retief <fgretief@spaceteq.co.za>
-
由 Francois Retief 提交于
Update the LEON2/3 serial driver to make use of the readl and writel macros as well as the WATCHDOG_RESET() macro. Add readl/writel and friends to the asm/io.h file. Introduce the gd->arch.uart variable to store register address. Lastly, remove baudrate scaler macro variables from board config. It is now calculated in the serial driver using the global data variable. Signed-off-by: NFrancois Retief <fgretief@spaceteq.co.za>
-
由 Vignesh R 提交于
This adds support to update firmware on qspi flash present on am437x-sk-evm and am43xx-epos-evm via DFU. On device: => setenv dfu_alt_info ${dfu_alt_info_qspi} => dfu 0 sf 0:0 On host: $ sudo dfu-util -l $ sudo dfu-util -D u-boot.bin -a u-boot.bin Signed-off-by: NVignesh R <vigneshr@ti.com>
-
由 Vincent BENOIT 提交于
-> Add National instrument ethernet transceiver configuration used (DP83848) -> Change cpsw slave phy address -> modify nand configuration to use the correct ECC and correct nand features
-
由 Matwey V. Kornilov 提交于
CONFIG_BOOTDELAY is defined in config_distro_defaults.h Signed-off-by: NMatwey V. Kornilov <matwey.kornilov@gmail.com> [trini: Drop omap3_logic.h settings which were a warning and no longer correct usage]. Signed-off-by: NTom Rini <trini@konsulko.com>
-