- 30 6月, 2017 11 次提交
-
-
由 Marek Vasut 提交于
Discern the SoMs based on the presence of SPI flash to support both variants of the SoM, one booting from SPI NOR and one booting from eMMC. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
Use random ethaddr by default in case no ethaddr is set. Signed-off-by: NMarek Vasut <marex@denx.de>
-
由 Marek Vasut 提交于
The redesigned version of the SoM which was released onto the market does no longer contain SPI flash, but boots from the eMMC. Move the environment storage to the eMMC. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
Continue loading U-Boot from MMC2 when the SPL was loaded using SAM-BA loader. This allows the board to boot system from the removable media instead of the eMMC, which is useful for commissioning purposes. When booting from the eMMC, always boot from it as it is not possible to boot from the SD interface directly. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
The SoM has been redesigned to work around bug in the SoC and is now capable of booting from the eMMC. Add support for booting from eMMC. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
The SDHCI1 is the primary boot controller on rev. 2.1 SoM, which is the version available on the market. Swap the controller order to match this and future versions of the SoM. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
Init the controllers, otherwise the board cannot boot from SD/MMC. This boot option is new on rev. 2.1 SoM . Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
Enable DFU and USB mass storage support for the DENX MA5D4 SoM. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
The CAN controllers need slight delay between toggling of their reset line. Move this action into board_init(), otherwise timer will not be initialized and the board might hang. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
According to the datasheet, sequential mapping is used for DDR SDRAM, while interleaved mapping is used for regular SDRAM. Incorrect configuration of this bit does indeed cause sporadic memory instability. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Wenyou Yang <wenyou.yang@atmel.com>
-
由 Marek Vasut 提交于
The board is now manufactured by Aries Embedded GmbH , rename it. Signed-off-by: NMarek Vasut <marex@denx.de>
-
- 29 6月, 2017 8 次提交
-
-
由 Heiko Schocher 提交于
since commit: f8b7fff1 "serial: atmel_usart: Add clk support" taurus board comes not up anymore. Fix it. Signed-off-by: NHeiko Schocher <hs@denx.de> Acked-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Heiko Schocher 提交于
since commit 842778a0 dfu-util shows serial="UNDEFINED". to see here again a serial number, we have to call g_dnl_set_serialnumber(). Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
since commit: f8b7fff1 "serial: atmel_usart: Add clk support" smartweb board comes not up anymore. Fix it. Signed-off-by: NHeiko Schocher <hs@denx.de> Acked-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Heiko Schocher 提交于
fix warnings: drivers/usb/gadget/at91_udc.c:1344:12: warning: 'at91rm9200_udc_init' defined but not used [-Wunused-function] drivers/usb/gadget/at91_udc.c:1379:13: warning: 'at91rm9200_udc_pullup' defined but not used [-Wunused-function] drivers/usb/gadget/at91_udc.c:1476:12: warning: 'at91sam9263_udc_init' defined but not used [-Wunused-function] Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Peter Robinson 提交于
The CONFIG_DEFAULT_FDT_FILE expects just the file not a full path as that might vary depending on the variant of Linux distro you might be using. Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Acked-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Bin Meng 提交于
Some Kconfig options are defined in a line with leading spaces/tabs. Update build-whitelist/check-config scripts to handle such cases. Generate a new config_whitelist.txt with new scripts. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Andy Yan 提交于
The origin SPL_USE_ARCH_MEMSET/MEMCPY use same prompt message as USE_ARCH_MEMSET/MEMCPY, which makes it's hard to distinguish them in menuconfig interface. This patch gives them different prompt messages for spl and none-spl config. Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
-
由 Lukasz Majewski 提交于
After the commit SHA1: 842778a0 - the serial number descriptor is only visible when we have non zero length of g_dnl_serial. However, on some platforms (e.g. Siemens) the serial number is set at g_dnl_bind_fixup(), so with the current code we will always omit the serial (since it is not set). This commit moves the g_dnl_bind_fixup() call before the g_dnl_serial length test. Signed-off-by: NLukasz Majewski <lukma@denx.de> Acked-by: NHeiko Schocher <hs@denx.de> Tested-by: NHeiko Schocher <hs@denx.de>
-
- 28 6月, 2017 1 次提交
-
-
由 Tom Rini 提交于
The ti816x SoC revision of the ethernet IP block is handled by the "davinci_emac" driver, rather than the "cpsw" driver as done by later members of the family. Enable the relevant plumbing. Signed-off-by: NSriramakrishnan <srk@ti.com> Signed-off-by: NVitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 27 6月, 2017 5 次提交
-
-
-
git://www.denx.de/git/u-boot-imx由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com> Conflicts: include/configs/imx6qdl_icore_rqs.h include/configs/imx6ul_geam.h include/configs/imx6ul_isiot.h
-
由 Bin Meng 提交于
This reverts commit ddb3ac3c. With MMC converted to driver model, SCSI driver is broken due to zero address access at (ops->read) in block_dread() function. The fix (SCSI driver converted to DM) is ready in u-boot-dm branch, but it is too late for this relese to get that in. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Fabio Estevam 提交于
The correct name is 'Celsius', so fix it accordingly. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
-
- 26 6月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
These are only used in drivers/mis/i2c_eeprom.c Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 25 6月, 2017 5 次提交
-
-
git://git.denx.de/u-boot-uniphier由 Tom Rini 提交于
- fix sparse warnings - sync DT with Linux - add new board support (LD11/LD20 global)
-
由 Kunihiko Hayashi 提交于
Add initial device tree support for LD20 Global board. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Kunihiko Hayashi 提交于
Add initial device tree support for LD11 Global board. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Fix warnings reported by sparse: - ... was not declared. Should it be static?" - cast to restricted __be32 While fixing those, the type conflict of cci500_init() was found. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 23 6月, 2017 9 次提交
-
-
-
由 Kever Yang 提交于
According to rk3036 TRM, pll_con1[12] should be set to '1' for the pll integer mode, while the '0' means the frac mode. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Kever Yang 提交于
The maximum spl_size for rk3399 is the internal memory size minus the size used in bootrom (which usually can get from SPL_TEXT_BASE). Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Kever Yang 提交于
The SPL_MAX_SIZE is the internal memory size minux the space used by bootrom. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Tom Rini 提交于
This function is unused, remove. Reported by clang-3.8. Fixes: a1c29d4b ("rockchip: mkimage: set init_boot_size to avoid ...") Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Heiko Schocher 提交于
since commit: f8b7fff1 "serial: atmel_usart: Add clk support" corvus board comes not up anymore. Fix it. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Philipp Tomsich 提交于
Adding myself to MAINTAINERS and git-mailrc for the rockchip sub-architecture. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Heiko Schocher 提交于
fix menutext for the options SPL_DM_SERIAL and TPL_DM_SERIAL. Both have the same text as DM_SERIAL, which is confusing. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Heiko Schocher 提交于
for debugging it is handy to know the fdt_blob address. So print it in bdinfo. Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-