- 10 9月, 2011 13 次提交
-
-
由 Vladimir Zapolskiy 提交于
This change allows to cope with a mii bus device registered using miiphy_register(), which doesn't assign a default reset handler. Signed-off-by: NVladimir Zapolskiy <vz@mleia.com> Acked-by: NDetlev Zundel <dzu@denx.de>
-
由 Bastian Ruppert 提交于
This is the same behaviour like tftp or fatload command. Signed-off-by: NBastian Ruppert <Bastian.Ruppert@Sewerin.de> CC: kmpark@infradead.org Acked-by: NDetlev Zundel <dzu@denx.de>
-
由 Simon Glass 提交于
assert() is like BUG_ON() but compiles to nothing unless DEBUG is defined. This is useful when a condition is an error but a board reset is unlikely to fix it, so it is better to soldier on in hope. Assertion failures should be caught during development/test. It turns out that assert() is defined separately in a few places in U-Boot with various meanings. This patch cleans up some of these. Build errors exposed by this change (and defining DEBUG) are also fixed in this patch. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Wolfgang Denk 提交于
Pick them up automatically using $(boards_by_arch ...) Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Wolfgang Denk 提交于
Fix these: yaffs_guts.c: In function 'yaffs_ReadDataFromFile': yaffs_guts.c:4622: warning: pointer targets in passing argument 3 of 'yaffs_AddrToChunk' differ in signedness yaffs_guts.c:4622: warning: pointer targets in passing argument 4 of 'yaffs_AddrToChunk' differ in signedness yaffs_guts.c: In function 'yaffs_WriteDataToFile': yaffs_guts.c:4745: warning: pointer targets in passing argument 3 of 'yaffs_AddrToChunk' differ in signedness yaffs_guts.c:4745: warning: pointer targets in passing argument 4 of 'yaffs_AddrToChunk' differ in signedness yaffs_guts.c: In function 'yaffs_ResizeFile': yaffs_guts.c:4968: warning: pointer targets in passing argument 3 of 'yaffs_AddrToChunk' differ in signedness yaffs_guts.c:4968: warning: pointer targets in passing argument 4 of 'yaffs_AddrToChunk' differ in signedness yaffs_guts.c: In function 'yaffs_GutsInitialise': yaffs_guts.c:7235: warning: assignment from incompatible pointer type yaffs_guts.c: In function 'yaffs_CreateNewObject': yaffs_guts.c:2143: warning: 'tn' may be used uninitialized in this function yaffs_guts.c: In function 'yaffs_MknodObject': yaffs_guts.c:2258: warning: 'str' may be used uninitialized in this function Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix these: yaffs_guts.c: At top level: yaffs_guts.c:400: warning: 'yaffs_SkipFullVerification' defined but not used Testing shows no changes of the image sizes. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix these: yaffs_guts.c: In function 'yaffs_Scan': yaffs_guts.c:5436: warning: pointer targets in passing argument 4 of 'yaffs_QueryInitialBlockState' differ in signedness yaffs_guts.c: In function 'yaffs_ScanBackwards': yaffs_guts.c:6017: warning: pointer targets in passing argument 4 of 'yaffs_QueryInitialBlockState' differ in signedness yaffs_nand.c: In function 'yaffs_QueryInitialBlockState': yaffs_nand.c:109: warning: pointer targets in passing argument 4 of 'dev->queryNANDBlock' differ in signedness yaffs_nand.c:113: warning: pointer targets in passing argument 4 of 'yaffs_TagsCompatabilityQueryNANDBlock' differ in signedness Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Drop the "-DNO_Y_INLINE" setting to fix these: yaffs_guts.h:806: warning: 'yaffs_GetBlockInfo' defined but not used Impact on image size is negligible - for the VCMA9 board the text segment size grew from 496353 to 496357 bytes (i. e. 0.0008%); total image size even remained constant. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix these: yaffscfg.c: In function 'cmd_yaffs_mread_file': yaffscfg.c:316: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'char *' yaffscfg.c: In function 'cmd_yaffs_ls': yaffscfg.c:371: warning: format '%7d' expects type 'int', but argument 3 has type 'off_t' Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Fix these: cmd_yaffs2.c: In function 'do_ywr': cmd_yaffs2.c:69: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'ulong' cmd_yaffs2.c:69: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'ulong' Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Helmut Raiger 提交于
eth_get_dev_by_name() is not safe to use for devname being NULL as it uses strcmp. This patch makes it fail with a BUG(). Signed-off-by: NHelmut Raiger <helmut.raiger@hale.at> Acked-by: NMike Frysinger <vapier@gentoo.org>
-
由 Wolfgang Denk 提交于
Commit 6af1d41a "smc911x MII made available" was missing a few "const" qualifiers. Fix the resulting in build warnings: smc911x.c: In function 'smc911x_initialize': smc911x.c:297: warning: passing argument 2 of 'miiphy_register' from incompatible pointer type smc911x.c:297: warning: passing argument 3 of 'miiphy_register' from incompatible pointer type Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Helmut Raiger <helmut.raiger@hale.at>
-
- 08 9月, 2011 24 次提交
-
-
由 Stefano Babic 提交于
Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Marek Vasut 提交于
FIX for a typo-bug: The address is stored in PSPR, not PSSR. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Helmut Raiger 提交于
The driver already had the MII functions, but they have not been registered using miiphy_register(). Signed-off-by: NHelmut Raiger <helmut.raiger@hale.at>
-
由 Anton Staaf 提交于
Currently when you call ROUND with a value that is already a multiple of the second parameter it will return a value that is one multiple larger, instead of returning the value passed in. There are only two types of usage of ROUND currently, one in various config files to round CONFIG_SYS_MALLOC_LEN to a multiple of 4096 bytes. The other in cmd_sf.c where the incorrect behavior of ROUND is worked around be subtracting one from the length argument before passing it to ROUND. This patch fixes ROUND and removes the workaround from cmd_sf. It also results in all of the malloc pools that use ROUND to compute their size shrinking by 4KB. Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Mike Frysinger <vapier@gentoo.org>
-
git://git.denx.de/u-boot-mmc由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-mmc: ftsdc010: add support of ftsdc010 mmc controller mmc: Fix mmc_send_status()
-
git://git.denx.de/u-boot-video由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-video: VIDEO: mb86r0xgdc.c: fix warning: unused variable 'i'
-
由 Stefano Babic 提交于
Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Heiko Schocher <hs@denx.de> Acked-by: NHeiko Schocher <hs@denx.de>
-
由 Stefano Babic 提交于
Add missing case to be used in common MXC code. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Che-liang Chiou 提交于
The out-of-tree build fails because the Makefiles in question depend on source files of another directory but do not explicitly mkdir that directory. As a matter of fact, other Makefiles under board/*/ directory that refer to source files under another directory explicitly call mkdir. This patch adds explicit mkdir's to the Makefiles in question, and verifies that out-of-tree build is working. Signed-off-by: NChe-Liang Chiou <clchiou@chromium.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
-
由 Wolfgang Denk 提交于
Commit 17659d7d "Timer: Remove reset_timer_masked()" introduced a static declaration for reset_timer_masked() which causes build errors: timer.c:45: error: static declaration of 'reset_timer_masked' follows non-static declaration include/asm/u-boot-arm.h:70: error: previous declaration of 'reset_timer_masked' was here Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Graeme Russ <graeme.russ@gmail.com> Cc: Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Sandeep Paulraj <s-paulraj@ti.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Marek Vasut <marek.vasut@gmail.com> Acked-by: NMarek Vasut <marek.vasut@gmail.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Rolf Offermanns <rof@sysgo.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Thomas Elste <info@elste.org>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Alex Züpke <azu@sysgo.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Marius Gröger <mag@sysgo.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: George G. Davis <gdavis@mvista.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Curt Brune <curt@cucy.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Marius Gröger <mag@sysgo.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Alex Züpke <azu@sysgo.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Stefano Babic 提交于
commit 0edf8b5b breaks building on a different directory with the O= parameter. The patch wil fix this issue, generating always asm-offsets.h before the other targets. Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Matthias Weisser <weisserm@arcor.de> CC: Wolfgang Denk <wd@denx.de>
-
- 06 9月, 2011 1 次提交
-
-
由 Wolfgang Denk 提交于
Fix build warning: Configuring for jadecpu board... mb86r0xgdc.c: In function 'dsp_init': mb86r0xgdc.c:60: warning: unused variable 'i' Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Anatolij Gustschin <agust@denx.de>
-
- 05 9月, 2011 2 次提交
-
-
由 Diana CRACIUN 提交于
Since we are loading an executable image into memory we need flush it out of the cache to possible maintain coherence on CPUs with split instruction and data caches. We do this for other executable image loading command. On PowerPC once we do this we no longer need to explicitly flush the dcache on multi-core systems in the BOOTM_STATE_OS_PREP phase. We now treat the BOOTM_STATE_OS_PREP as a no-op to maintain backwards compatibility with the bootm subcommand. Signed-off-by: NJames Yang <James.Yang@freescale.com> Signed-off-by: NDiana CRACIUN <Diana.Craciun@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Simon Glass 提交于
This fixes "Warning: failed to set MAC address" on platforms which rely on an 'ethaddr' environment variable to set the MAC address. This bug was introduced by this commit: 7616e785 Add Ethernet hardware MAC address framework to usbnet Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NKumar Gala <galak@kernel.crashing.org> Tested-by: NMichal Simek <monstr@monstr.eu> Tested-by: NHeiko Schocher <hs@denx.de>
-