- 28 4月, 2011 40 次提交
-
-
由 Emil Medve 提交于
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Emil Medve 提交于
Rework and add some new APIs to the fsl_corenet_serdes code for use by erratum and drivers. * Rename serdes_get_bank() to serdes_get_bank_by_lane() * Add serdes_get_first_lane returns which SERDES lane is used by device Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Trübenbach, Ralf 提交于
This patch fixes a wrong address define in corenet_ds.h (used by P4080DS.h, P3041DS.h, P5020DS.h). Since board/Freescale/corenet_ds/tlb.c does not use the CONFIG_SYS_PCIE3_MEM_VIRT define (uses CONFIG_SYS_PCIE1_MEM_VIRT with a fix offset instead) this has no effect to the functionality. But it may be important for changes in the future? Signed-off-by: NRalf Trübenbach <ralf.truebenbach@men.de> Cc: Andy Fleming <afleming@gmail.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Haiying Wang 提交于
Fix fdt bportal to pass the bman revision number to kernel via device tree. Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Ramneek Mehresh 提交于
Second USB controller only works for SPI and SD boot because of pin muxing Signed-off-by: NRamneek Mehresh <ramneek.mehresh@freescale.com>
-
由 Dipen Dudhat 提交于
Signed-off-by: NDipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Dipen Dudhat 提交于
To make sure that machine change operation work successfully, change timing parameters first before changing machine for chip select on IFC. Signed-off-by: NDipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Priyanka Jain 提交于
If we boot from a SD card use it for the environment as well. Signed-off-by: NPriyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: NPoonam Aggrwal <Poonam.Aggrwal@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kim Phillips 提交于
u-boot environments, esp. when boards are shared across multiple users, can get pretty large and time consuming to visually parse. The grepenv command this patch adds can be used in lieu of printenv to facilitate searching. grepenv works like printenv but limits its output only to environment strings (variable name and value pairs) that match the user specified substring. the following examples are on a board with a 5313 byte environment that spans multiple screen pages: Example 1: summarize ethernet configuration: => grepenv eth TSEC etact=FM1@DTSEC2 eth=FM1@DTSEC4 ethact=FM1@DTSEC2 eth1addr=00:E0:0C:00:8b:01 eth2addr=00:E0:0C:00:8b:02 eth3addr=00:E0:0C:00:8b:03 eth4addr=00:E0:0C:00:8b:04 eth5addr=00:E0:0C:00:8b:05 eth6addr=00:E0:0C:00:8b:06 eth7addr=00:E0:0C:00:8b:07 eth8addr=00:E0:0C:00:8b:08 eth9addr=00:E0:0C:00:8b:09 ethaddr=00:E0:0C:00:8b:00 netdev=eth0 uprcw=setenv ethact $eth;setenv filename p4080ds/R_PPSXX_0xe/rcw_0xe_2sgmii_rev2_high.bin;setenv start 0xe8000000;protect off all;run upimage;protect on all upuboot=setenv ethact $eth;setenv filename u-boot.bin;setenv start eff80000;protect off all;run upimage;protect on all upucode=setenv ethact $eth;setenv filename fsl_fman_ucode_P4080_101_6.bin;setenv start 0xef000000;protect off all;run upimage;protect on all usdboot=setenv ethact $eth;tftp 1000000 $dir/$bootfile;tftp 2000000 $dir/initramfs.cpio.gz.uboot;tftp c00000 $dir/p4080ds-usdpaa.dtb;setenv bootargs root=/dev/ram rw console=ttyS0,115200 $othbootargs;bootm 1000000 2000000 c00000; => Example 2: detect unused env vars: => grepenv etact etact=FM1@DTSEC2 => Example 3: reveal hardcoded variables; e.g., for fdtaddr: => grepenv fdtaddr fdtaddr=c00000 nfsboot=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr ramboot=setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr => grep $fdtaddr fdtaddr=c00000 my_boot=bootm 0x40000000 0x41000000 0x00c00000 my_dtb=tftp 0x00c00000 $prefix/p4080ds.dtb nohvboot=tftp 1000000 $dir/$bootfile;tftp 2000000 $dir/$ramdiskfile;tftp c00000 $dir/$fdtfile;setenv bootargs root=/dev/ram rw ramdisk_size=0x10000000 console=ttyS0,115200;bootm 1000000 2000000 c00000; => This patch also enables the grepenv command by default on corenet_ds based boards (and repositions the DHCP command entry to keep the list sorted). Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Cc: Kumar Gala <kumar.gala@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
-
由 Timur Tabi 提交于
Signed-off-by: NTimur Tabi <timur@freescale.com>
-
由 Kim Phillips 提交于
commit 560d424b "env: re-add support for auto-completion" fell short of its description - the 'used' logic in hmatch_r was reversed - 'used' is 0 if the hash table entry is not used, or -1 if deleted. This patch makes hmatch_r actually match on valid ('used') entries, instead of skipping them and failing to match anything. typing 'printenv tft' and hitting 'tab' now displays valid choices for variable names. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Cc: Mike Frysinger <vapier@gentoo.org> Tested-by: NMike Frysinger <vapier@gentoo.org>
-
由 Heiko Schocher 提交于
call flash_protect_default() to protect default sectors. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
- rev5 board has phy addr 1 -> adapt CONFIG_PHY_ADDR define in board config file. - also fixup the phy addr entry in dts, before booting Linux. Signed-off-by: NHeiko Schocher <hs@denx.de> Acked-by: NDetlev Zundel <dzu@denx.de>
-
由 Gray Remlin 提交于
If neither CONFIG_CMD_PING or CONFIG_CMD_SNTP are defined but CONFIG_CMD_DNS is, a compile-time error will occur due to the absence of a goto label. Signed-off-by: NGray Remlin <gryrmln@gmail.com>
-
由 thomas.langer@lantiq.com 提交于
This patch fixes problems in the handling of redundant environment in env_sf.c The major problem are double calls of free() on the allocated buffers, which damages the internal data of malloc and crashes on next call. In addition, the selection of the active environment had errors and compiler warnings, which are corrected by this patch. Signed-off-by: NThomas Langer <thomas.langer@lantiq.com>
-
-
-
-
-
由 Minkyu Kang 提交于
If FB address is defined specific address then don't grab memory for LCD Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <kumar.gala@freescale.com>
-
由 Alessandro Rubini 提交于
Signed-off-by: NAlessandro Rubini <rubini@unipv.it> Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com>
-
由 Alessandro Rubini 提交于
This patch defines all the needed symbols in the header file and removes the now-unused config.mk in board directory. Changes to board C file as requested. Signed-off-by: NAlessandro Rubini <rubini@gnudd.com> Signed-off-by: NAlessandro Rubini <rubini@unipv.it> Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com>
-
由 Alessandro Rubini 提交于
This source file, which I got by the vendor in their own port, was not actually executing because lib-based compilation didn't call lowlevel_init (we have CONFIG_SKIP_LOWLEVEL_INIT). With the change to object-based linking, an undefined symbol in this file started hitting in the final link. Signed-off-by: NAlessandro Rubini <rubini@unipv.it> Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com>
-
由 Eric Benard 提交于
- fix board support following relocation changes - switch to boards.cfg - disable i2c to keep size under 128kiB (1 sector) Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Macpaul Lin 提交于
Move the header file and definitions of ftsmc020 static memory control unit from a320 SoC folder to "drivers/mtd" folder. This change will let other SoC which also use ftsmc020 could share the same header file. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
由 Macpaul Lin 提交于
Move the header file "ftsdmc020.h" (SDRAM Controller) to "include/faraday" folder. This change will let other SoC which also use ftsdmc020 could share the same header file. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
由 Eric Benard 提交于
- update to new relocation code - switch to boards.cfg - get rid of LEGACY (still a little hack in .h to compile) - add nand boot configuration - boot tested for the following configurations : 9260 (64MB RAM & nor boot) 9260_nand (64MB RAM & nand boot) 9G20_128M (128MB RAM & nor boot) 9G20_nand_128M (128MB RAM & nand boot) (nor boot is using lowlevel init) Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Sughosh Ganu 提交于
Fix the nand_spl build for the hawkboard Signed-off-by: NSughosh Ganu <urwithsughosh@gmail.com>
-
由 Luca Ceresoli 提交于
Board support for the DIG297 board manufactured by Comelit Group SpA. It is a custom board based on the BeagleBoard <http://beagleboard.org/> by Texas Instruments. The board support is based on the BeagleBoard implementation. Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Luca Ceresoli 提交于
Removed boot_flash_* extern variables. boot_flash_type was totally unused. The other ones were actually constants, so they have been replaced with #defines in the board config files. Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Eric Cooper 提交于
Since addr_sp is a byte address, it should be adjusted by 12 here. Signed-off-by: NEric Cooper <ecc@cmu.edu> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: NWolfgang Denk <wd@denx.de>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Luca Ceresoli 提交于
Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Luca Ceresoli 提交于
CONFIG_OMAP34XX must be checked for existence, not value. Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Alexander Holler 提交于
The reset sequence/configuration for ehci is highly board specific, so this will be done in the source for the board, instead of introducing several CONFIG_* which would be needed to make those few lines in beagle.c usable across different OMAP boards. Signed-off-by: NAlexander Holler <holler@ahsoftware.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Alexander Holler 提交于
Signed-off-by: NAlexander Holler <holler@ahsoftware.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Alexander Holler 提交于
Signed-off-by: NAlexander Holler <holler@ahsoftware.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-