- 14 4月, 2018 1 次提交
-
-
由 Joe Hershberger 提交于
This reverts the parts of commit 3b3ea2c5 where it changed the EFI dependency on NET. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NDuncan Hare <dh@synoia.com>
-
- 06 4月, 2018 1 次提交
-
-
由 Alexander Graf 提交于
With legacy boot (booti, bootz), people can declare memory regions as reserved using device tree memory reservations. This feature is some times used to indicate memory regions that should not be touched. Since in a UEFI world, the DT memory reservations do not get honored, let's copy them into the UEFI memory map so everyone has a coherent view of the world and we give people the chance to add reservations on demand. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 04 4月, 2018 5 次提交
-
-
由 Heinrich Schuchardt 提交于
The device path of the loaded image should be set to the partition from which the image was loaded. This requires using the same logic as the load command. Without the patch the device path pointed to the whole disk after executing load mmc 0: 0x43000000 FILE and not to the boot partition from which the file was actually loaded. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
The second argument of the bootefi command should always be usable to specify a device tree. This was missing for bootefi selftest and bootefi hello. Proper error handling is added. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Up to now errors in the initialization of the EFI subsystems was not checked. If any initialization fails, leave the bootefi command. We do not retry initialization because this would require to undo all prior initalization steps. Suggested-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
The return type of do_bootefi_exec() is efi_status_t. So in case of an error we should always return an EFI status code. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
efi_init_obj_list() should be executed only once. Rather than having the caller check this variable and the callee set it, move all access to the variable inside the function. This reduces the logic needed to call efi_init_obj_list(). Suggested-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 05 3月, 2018 1 次提交
-
-
由 Masahiro Yamada 提交于
Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: NThomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 28 2月, 2018 1 次提交
-
-
由 Michal Simek 提交于
Enable networking command only when NET is enabled. And remove selecting NET for CMD_NET Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 10 2月, 2018 1 次提交
-
-
由 Heinrich Schuchardt 提交于
The bootefi command is missing in the online help for bootefi bootmgr. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 29 1月, 2018 2 次提交
-
-
由 Heinrich Schuchardt 提交于
If 'bootefi hello' or 'bootefi selftest' can be executed depends on the configuration. If an invalid non-numeric 1st argument is passed to bootefi, e.g. 'bootefi hola', this string is converted to 0 and U-Boot jumps to this typically invalid address. With the patch the online help is shown instead. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
EFI calls are usually defined as asmlinkage. That means we pass all parameters to functions via the stack x86_32. On x86_64 however, we need to also stick to the MS ABI calling conventions, which the EFIAPI define conveniently handles for us. Most EFI functions were also marked with EFIAPI, except for the entry call. So this patch adjusts all entry calls to use EFIAPI instead of the manual asmlinkage attribute. While at it, we also change the prototype of the entry point to return efi_status_t instead of ulong, as this is the correct prototype definition. Signed-off-by: NAlexander Graf <agraf@suse.de> --- v1 -> v2: - Use efi_status_t in all occurences
-
- 23 1月, 2018 3 次提交
-
-
由 Heinrich Schuchardt 提交于
This patch provides * a uclass for EFI drivers * a EFI driver for block devices For each EFI driver the uclass * creates a handle * adds the driver binding protocol The uclass provides the bind, start, and stop entry points for the driver binding protocol. In bind() and stop() it checks if the controller implements the protocol supported by the EFI driver. In the start() function it calls the bind() function of the EFI driver. In the stop() function it destroys the child controllers. The EFI block driver binds to controllers implementing the block io protocol. When the bind function of the EFI block driver is called it creates a new U-Boot block device. It installs child handles for all partitions and installs the simple file protocol on these. The read and write functions of the EFI block driver delegate calls to the controller that it is bound to. A usage example is as following: U-Boot loads the iPXE snp.efi executable. iPXE connects an iSCSI drive and exposes a handle with the block IO protocol. It calls ConnectController. Now the EFI block driver installs the partitions with the simple file protocol. iPXE uses the simple file protocol to load Grub or the Linux Kernel. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> [agraf: add comment on calloc len] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
The device tree is needed at runtime. So we have to store it in EFI_RUNTIME_SERVICES_DATA memory. The UEFI spec recommends to store all configuration tables in EFI_RUNTIME_SERVICES_DATA memory. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
We should consistently use the efi_handle_t typedef when referring to handles. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 01 12月, 2017 8 次提交
-
-
由 Heinrich Schuchardt 提交于
The handle of a loaded image is the value of the handle member of the loaded image info object and not the address of the loaded image info. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Stefan Roese 提交于
When trying to load an image from a non-existent USB key, U-Boot v2017.11 crashes on my x86 platform: => load usb 0:1 03000000 abc General Protection EIP: 0010:[<7b59030d>] EFLAGS: 00010286 Original EIP :[<fff4330d>] ... This used to work in v2017.09. Testing has shown, that this bug was introduced with patch 95c5553e [efi_loader: refactor boot device and loaded_image handling]. This patch now checks if a valid "desc" is returned from blk_get_dev() and only continues when "desc" is available. Resulting in this cmd output (again): => load usb 0:1 03000000 abc ** Bad device usb 0 ** Signed-off-by: NStefan Roese <sr@denx.de> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Use environment variable bootargs used as load options for bootefi payloads. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
After executing bootefi selftest * restore GD * unlink the load image handle * return 0 or 1 and not a truncated efi_status_t. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Environment variable efi_selftest is passed as load options to the selftest application. It is used to select a single test to be executed. The load options are an UTF8 string. Yet I decided to keep the name propertiy of the tests as char[] to reduce code size. Special value 'list' displays a list of all available tests. Tests get an on_request property. If this property is set the tests are only executed if explicitly requested. The invocation of efi_selftest is changed to reflect that bootefi selftest with efi_selftest = 'list' will call the Exit bootservice. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Currently we pass bootefi_device_path and bootefi_image_path as device and image path without initializing them. They may carry values from previous calls to bootefi. With the patch the variables are initialized valid dummy values. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Where ulong or unsigned long are used to hold an EFI status code we should consistenly use efi_status_t. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
The watchdog is initialized with a 5 minute timeout period. It can be reset by SetWatchdogTimer. It is stopped by ExitBoottimeServices. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 12 10月, 2017 1 次提交
-
-
由 Rob Clark 提交于
When we don't have a real device/image path, such as 'bootefi hello', construct a mem-mapped device-path. This fixes 'bootefi hello' after devicepath refactoring. Fixes: 95c5553e ("efi_loader: refactor boot device and loaded_image handling") Signed-off-by: NRob Clark <robdclark@gmail.com> Acked-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 21 9月, 2017 2 次提交
-
-
由 Rob Clark 提交于
efi_exit() already restores gd, so we shouldn't EFI_EXIT() on the otherside of the longjmp(). Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
ad503ffe9c6 efi_loader: refactor boot device and loaded_image handling leads to an error when building with CONFIG_CMD_BOOTEFI_SELFTEST=y This patch fixes the problem. Fixes: ad503ffe9c6 efi_loader: refactor boot device and loaded_image handling Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 20 9月, 2017 3 次提交
-
-
由 Rob Clark 提交于
Similar to a "real" UEFI implementation, the bootmgr looks at the BootOrder and BootXXXX variables to try to find an EFI payload to load and boot. This is added as a sub-command of bootefi. The idea is that the distro bootcmd would first try loading a payload via the bootmgr, and then if that fails (ie. first boot or corrupted EFI variables) it would fallback to loading bootaa64.efi. (Which would then load fallback.efi which would look for \EFI\*\boot.csv and populate BootOrder and BootXXXX based on what it found.) Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Rob Clark 提交于
Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Rob Clark 提交于
Get rid of the hacky fake boot-device and duplicate device-path constructing (which needs to match what efi_disk and efi_net do). Instead convert over to use efi_device_path helpers to construct device-paths, and use that to look up the actual boot device. Also, extract out a helper to plug things in properly to the loaded_image. In a following patch we'll want to re-use this in efi_load_image() to handle the case of loading an image from a file_path. Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 19 9月, 2017 3 次提交
-
-
由 Heinrich Schuchardt 提交于
A testing framework for the EFI API is provided. It can be executed with the 'bootefi selftest' command. It is coded in a way that at a later stage we may turn it into a standalone EFI application. The current build system does not allow this yet. All tests use a driver model and are run in three phases: setup, execute, teardown. A test may be setup and executed at boottime, it may be setup at boottime and executed at runtime, or it may be setup and executed at runtime. After executing all tests the system is reset. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
In scripts/Makefile.lib we build section including helloworld.efi. This allows to load the EFI binary with command 'bootefi hello'. scripts/Makefile.lib contains explicit references to strings containing helloworld and hello_world. This makes it impossible to generalize the coding to accomodate additional built in EFI binaries. Let us rename the variables __efi_hello_world_* to __efi_helloworld_*. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Command 'bootefi hello' currently uses CONFIG_SYS_LOAD_ADDR as loading address. qemu machines have by default 128 MiB RAM. CONFIG_SYS_LOAD_ADDR for x86 is 0x20000000 (512 MiB). This causes 'bootefi hello' to fail. We should use the environment variable loadaddr if available. It defaults to 0x1000000 (16 MiB) on qemu_x86. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 12 8月, 2017 1 次提交
-
-
由 xypron.glpk@gmx.de 提交于
We should use constant EFI_PAGE_SIZE instead of 4096 where the coding relies on 4096 being EFI_PAGE_SIZE. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 26 7月, 2017 1 次提交
-
-
由 Alexander Graf 提交于
Before commit 7cbc1241 ("efi_loader: initalize EFI object list only once") we recreated the world on every bootefi invocation. That included the object tree as well as the configuration tables. Now however we don't recreate them, which means we must not explicitly override the configuration tables, as otherwise we may lose our SMBIOS table from the configuration table list on second bootefi invocation. This patch makes bootefi call our normal configuration table modification APIs to add/remove the FDT instead of recreating all tables from scratch. That way the SMBIOS table gets preserved across multiple invocations. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 24 7月, 2017 3 次提交
-
-
由 Heinrich Schuchardt 提交于
If several EFI applications are executed in sequence we want to keep the content of the EFI object list. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Rob Clark 提交于
Make EFI GOP support work with DM_VIDEO but without legacy LCD. Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Rob Clark 提交于
shim.efi, for example, actually tries to parse this, but is expecting backslashes. Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 19 7月, 2017 3 次提交
-
-
由 xypron.glpk@gmx.de 提交于
Set up a timer event and the WaitForKey event. In the notify function of the timer event check for console input and signal the WaitForKey event accordingly. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
Currenty any EFI status other than EFI_SUCCESS is reported as Application terminated, r = -22 With the patch the status code returned by the EFI application is printed. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
The Unified Extensible Firmware Interface Specification, version 2.7, defines in chapter 2.1.2 - UEFI Application that an EFI application may either directly return or call EFI_BOOT_SERVICES.Exit(). Unfortunately U-Boot makes the incorrect assumption that EFI_BOOT_SERVICES.Exit() is always called. So the following application leads to a memory exception on the aarch64 architecture when returning: EFI_STATUS efi_main( EFI_HANDLE handle, EFI_SYSTEM_TABlE systable) { return EFI_SUCCESS; } With this patch the entry point is stored in the image handle. The new wrapper function do_enter is used to call the EFI entry point. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-