Import cvmx-pcsx-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-pciercx-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-pcieepx-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-npi-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-mio-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-l2c-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-ipd-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-gserx-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-gmxx-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-fpa-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-dtx-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-dpi-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-dbg-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-ciu-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-bgxx-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-asxx-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import cvmx-agl-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Import misc cvmx-helper header files from 2013 U-Boot. They will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: NAaron Williams <awilliams@marvell.com>
Signed-off-by: NStefan Roese <sr@denx.de>

This will be used by the upcoming Serdes and driver code ported from
the original 2013 U-Boot code to mainline.
Signed-off-by: NStefan Roese <sr@denx.de>

Bump our py version to 1.10.0 to address CVE-2020-29651.

Reported-by: GitHub dependabot
Reported-by: NLey Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: NTom Rini <trini@konsulko.com>

 - search for additional detailed timings in the EDID extension block
 - rework sunxi DE2 driver and accompanying DW-HDMI platform driver
   to drop redundant device specific code, and later use the DT as a
   source of information

Pull request for efi-2021-07-rc1-3

Documentation fixes

UEFI bug fixes:

* error handling for capsule updates

Currently DE2 driver uses functions which are defined in internal
headers. They are not meant to be used outside of uclass framework.
Switch DE2 driver to public ones. This has additional benefit that
device_probe doesn't need to be called manually.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>

There is no real need to read source_id at probe time. It also doesn't
make sense to store it in driver private data since it's already stored
in class platform data. While this looks like cleanup (and it is), it's
also important for DE2 driver rework because this info will be filled
later (after probe is already executed).
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>

TV driver was never fully implemented. Remove search for it from DE2
driver.
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>

No Allwinner board with DW-HDMI controller use separate I2C bus for
EDID read. Remove that check.
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>

It turns out that there are two ways how hot plug detection can be done.
One is standard way for DW HDMI controller - checking bit 2 in 0x3004
register. Another way is applicable only to Allwinner custom PHY - by
checking bit 19 in register 0x10038. Both methods are equally good as
far as we know.

Use standard method in order to reduce amount of custom code.
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>

One of my monitors have only 4k@60 timing in base EDID block which is
out of range for devices with HDMI 1.4. It turns out that it has
additional detailed timings in CTA-861 Extension Block and two of them
are appropriate for HDMI 1.4.

Add additional search for valid detailed timing in extension block.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Acked-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>

Code which searches for valid detailed timing entry will be used in more
places. Extract it.

No functional change is made. However, descriptors are casted to
edid_detailed_timing instead of edid_monitor_descriptor. Descriptor can
be of either type, but since we're interested only in DTD, it is more
fitting to cast to edid_detailed_timing.
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>

When searching for detailed timing in EDID, check for digital display
earlier. There is no point parsing other parameters if this flag is not
present.
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>

Currently driver accepts all resolution which won't work on 4k screens.
Add validation callback which limits acceptable resolutions to 297 MHz.
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>

commit cbea241e("efidebug: add multiple device path instances on Boot####")
slightly tweaked the efidebug syntax adding -b, -i and -s for the boot
image, initrd and optional data.
The pytests using this command were adapted as well. However I completely
missed the last "" argument, which at the time indicated the optional data
and needed conversion as well.  This patch is adding the missing -s flag
and the tests are back to normal.

Fixes: cbea241e("efidebug: add multiple device path instances on Boot####")
Signed-off-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Reviwed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

In case of failure at efi_get_variable_int("BootOrder"), we should
skip examining boot option variables and return an appropriate error
code which is the one the function returned.

Fixes: CID 331153 Code maintainability issues  (UNUSED_VALUE)
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Indicated by Coverity Scan CID 331147

The ESRT was being refreshed in situations where the UpdateCapsule
procedure failed. In that scenario:

1) the ESRT refresh was superfluous.
2) a failed ESRT refresh return code overwrites the UpdateCapsule error
return code.

This commit ensures that the ESRT is only refreshed when the
UpdateCapsule performs successfully.

CC: Heinrich Schuchardt <xypron.glpk@gmx.de>
CC: Sughosh Ganu <sughosh.ganu@linaro.org>
CC: AKASHI Takahiro <takahiro.akashi@linaro.org>
CC: Tom Rini <trini@konsulko.com>
CC: Andre Przywara <andre.przywara@arm.com>
CC: nd@arm.com
Signed-off-by: NJose Marinho <jose.marinho@arm.com>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Bumping the digest list count, for all supported algorithms,  can be
calculated outside of the individual switch statements.  So let's do that
for every loop iteration instead and simplify the code a bit.
Signed-off-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

To avoid diverging function definitions we need to include efi_loader.h.

Fixes: fe179d7f ("efi_loader: Add size checks to efi_create_indexed_name()")
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Due to copy-paste error, two of the setexpr arguments were missing.
Add the missing arguments.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Provide a man-page for the fatinfo command.

The .rst file was lost in patch 15d96946 ("doc: fatinfo man-page").

Fixes: 15d96946 ("doc: fatinfo man-page")
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

- Move LMB to Kconfig, improve functionality
- Add partlabel support to more fs cmds