- 22 10月, 2020 5 次提交
-
-
由 Heiko Schocher 提交于
add Kconfig option for pcf8563 driver and run tools/moveconfig.py Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Ovidiu Panait 提交于
CONFIG_{SPL,TPL}_SIZE_LIMIT are defined as hex (SPL_SIZE_LIMIT was converted in b51882d0 ("spl: Convert CONFIG_SPL_SIZE_LIMIT to hex"), but there are still places that reference integer values. Change those to hex as well. Also, update the Makefile to check for 0x0 instead of 0. This also fixes the following build error when CONFIG_SPL_SIZE_LIMIT is set by menuconfig to 0x0: ... spl/u-boot-spl.bin exceeds file size limit: limit: 0 bytes actual: 0x80f0 bytes excess: 0x80f0 bytes Signed-off-by: NOvidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Activate CONFIG_CMD_ELF to accept the command "bootelf". This patch simplifies the file stm32mp defconfig, as we have no reason to deactivate this command. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrick Delaunay 提交于
Activate CONFIG_CMD_EXPORTENV to accept the command "env export". Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrick Delaunay 提交于
Activate CONFIG_CMD_IMPORTENV to accept the command "env import". This command is useful in script to include some variable. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>
-
- 20 10月, 2020 1 次提交
-
-
由 Chunfeng Yun 提交于
Enable mtu3, xhci, tphy drivers. Device mode: enable fastboot; Host mode: enable USB, FAT commands, and fixed regulator, mass storage drivers; Due to device mode is enabled by default, comment out the host mode config here. Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 19 10月, 2020 1 次提交
-
-
由 Claudiu Beznea 提交于
Update defconfigs for using common clock framework compatible clocks. Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
-
- 18 10月, 2020 3 次提交
-
-
由 Patrick Delaunay 提交于
Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Done with: ./tools/moveconfig.py VIDEO_BMP_GZIP The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN are not activated in these defconfigs: - trats_defconfig - s5pc210_universal_defconfig - trats2_defconfig Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 16 10月, 2020 1 次提交
-
-
由 Stefan Roese 提交于
Enable WDT command for Octeon TX/TX2 boards. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
-
- 14 10月, 2020 2 次提交
-
-
由 Frédéric Danis 提交于
Add PStore command to sandbox and sandbox64 defconfigs. Add test checking: - 'pstore display' of all records - 'pstore display' only the 2nd dump record - 'pstore save' of all records Signed-off-by: NFrédéric Danis <frederic.danis@collabora.com> [trini: Adjust to always load files from source directory] Signed-off-by: NTom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
-
由 Luka Kovacic 提交于
Add initial U-Boot support for the iEi Puzzle-M801 board based on the Marvell Armada 88F8040 SoC. Currently supported hardware: 1x USB 3.0 4x Gigabit Ethernet 2x SFP+ (with NXP PCA9555 and NXP PCA9544) 1x SATA 3.0 1x M.2 type B 1x RJ45 UART 1x SPI flash 1x EPSON RX8010 RTC Signed-off-by: NLuka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: NStefan Roese <sr@denx.de>
-
- 12 10月, 2020 2 次提交
-
-
由 Yangbo Lu 提交于
Enable eMMC HS400 mode support on LX2160ARDB. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>
-
由 Vignesh Raghavendra 提交于
This enables applying DTBOs at U-Boot prompt before booting to kernel. Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com>
-
- 10 10月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 09 10月, 2020 4 次提交
-
-
由 Chee Hong Ang 提交于
CONFIG_OF_EMBED was primarily enabled to support the S10/Agilex spl hex file requirements. Since this option now produces a warning during build, and the spl hex can be created using alternate methods, CONFIG_OF_EMBED is no longer needed. Signed-off-by: NChee Hong Ang <chee.hong.ang@intel.com>
-
由 Chee Hong Ang 提交于
Don't invoke 'SYSTEM_RESET' PSCI function because PSCI function calls are not supported by u-boot running in EL3. Signed-off-by: NChee Hong Ang <chee.hong.ang@intel.com> Reviewed-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Chee Hong Ang 提交于
All SoCFPGA platforms (except Cyclone V) are now switching to CONFIG_WDT (driver model for watchdog timer drivers) from CONFIG_HW_WATCHDOG. Signed-off-by: NChee Hong Ang <chee.hong.ang@intel.com> Reviewed-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Chin Liang See 提交于
In current implementation, any exception would trigger a CPU reset. But a bad written SPL would cause infinite loop where the system will reload the same SPL instead of loading factory safe image. Hence this patch is to ensure any exception will cause a hang. At this moment, watchdog shall be triggered and Remote System Update mechanism shall load the next production image or factory safe image. Signed-off-by: NChin Liang See <chin.liang.see@intel.com> Signed-off-by: NChee Hong Ang <chee.hong.ang@intel.com> Reviewed-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
- 08 10月, 2020 3 次提交
-
-
由 Andre Przywara 提交于
Now that PIE works when U-Boot is started from ROM, let's enable CONFIG_POSITION_INDEPENDENT, which allows to load U-Boot also via ARM Trusted-Firmware's fip.bin to DRAM, without tweaking the configuration. To get a writable initial stack, we need to keep the fixed initial stack pointer, which points to DRAM in our case. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NStephen Warren <swarren@nvidia.com>
-
由 Stefan Roese 提交于
This patch enables USB support with some helpful commands, like fs support. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch adds the board specific configuration (struct) for the Octeon 3 EBB7304 EVK. This struct is ported from the 2013er Cavium / Marvell U-Boot repository. Also, the Octeon RAM driver is enabled in the board defconfig for its usage. Tested with one and two DIMMs on the EBB7304 EVK (8 & 16 GiB). Signed-off-by: NStefan Roese <sr@denx.de>
-
- 06 10月, 2020 2 次提交
-
-
由 Heinrich Schuchardt 提交于
CONFIG_EFI_GRUB_ARM32 is only needed for architectures with caches that are not managed via CP15 (or for some outdated buggy versions of GRUB). It makes more sense to disable the setting per architecture than per defconfig. Move QEMU's CONFIG_EFI_GRUB_ARM32_WORKAROUND=n from defconfig to Kconfig. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 05 10月, 2020 4 次提交
-
-
由 Neil Armstrong 提交于
The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between an USB3.0 Type A connector and a M.2 Key M slot. The PHY driving these differential lines is shared between the USB3.0 controller and the PCIe Controller, thus only a single controller can use it. This adds this dynamic switching right before booting Linux and the configuration steps in the boards documentation. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NKevin Hilman <khilman@baylibre.com> Tested-by: NKevin Hilman <khilman@baylibre.com> [narmstrong: fixed warning by replacing min() by min_t()]
-
由 Neil Armstrong 提交于
Use the newly added VIM3 board support instead of the generic W400. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NKevin Hilman <khilman@baylibre.com> Tested-by: NKevin Hilman <khilman@baylibre.com> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Neil Armstrong 提交于
Enable USB Host & Gadget on the Amlogic S400 board. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Neil Armstrong 提交于
Use the new Amlogic GXL/GXM USB Glue instead of the set of USB3 PHY and Simple DWC3 wrapper. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
- 01 10月, 2020 1 次提交
-
-
由 Philippe Reynes 提交于
This commit enable the support of the generic udp protocol. Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 30 9月, 2020 3 次提交
-
-
由 Etienne Carriere 提交于
Add tests for SCMI reset controllers. A test device driver sandbox-scmi_devices.c is used to get reset resources, allowing further resets manipulation. Change sandbox-smci_agent to emulate 1 reset controller exposed through an agent. Add DM test scmi_resets to test this reset controller. Signed-off-by: NEtienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Etienne Carriere 提交于
Add tests for SCMI clocks. A test device driver sandbox-scmi_devices.c is used to get clock resources, allowing further clock manipulation. Change sandbox-smci_agent to emulate 3 clocks exposed through 2 agents. Add DM test scmi_clocks to test these 3 clocks. Update DM test sandbox_scmi_agent with load/remove test sequences factorized by {load|remove}_sandbox_scmi_test_devices() helper functions. Signed-off-by: NEtienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Etienne Carriere 提交于
This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmiSigned-off-by: NEtienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 26 9月, 2020 4 次提交
-
-
由 Biju Das 提交于
Remove empty board_early_init_f function, since it is disabled in ebisu and condor board configs. Signed-off-by: NBiju Das <biju.das.jz@bp.renesas.com> Reviewed-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
-
由 Biju Das 提交于
Use "imply" instead of "select" for BOARD_EARLY_INIT_F config option, and then disable it on boards which don't need it. Updated grpeach_defconfig to disable CONFIG_BOARD_EARLY_INIT_F option for RZA1. Signed-off-by: NBiju Das <biju.das.jz@bp.renesas.com> Reviewed-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
-
由 Marek Vasut 提交于
Enable the fitImage update options on RCar Gen3 boards. This permits easy update of multiple bootloader components. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Enable the RPC Hyperflash driver on R8A7795,R8A7796,R8A77965 Salvator-X,ULCB and R8A77990 Ebisu. Note that to make the HF accessible, mainline ATF is mandatory and must be built with RCAR_RPC_HYPERFLASH_LOCKED=0 . Note that this is intended for development and testing convenience only and must be disabled in deployment for platform security reasons. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 25 9月, 2020 3 次提交
-
-
由 Simon Glass 提交于
Enable new features and provide require device-tree config so that U-Boot produces the correct ACPI tables on Coral. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add ACPI generation to the APL CPU driver. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Intel WiFi chips can use a common routine to write the information needed by linux. Add an implementation of this. Enable it for coral. Signed-off-by: NSimon Glass <sjg@chromium.org>
-