- 27 3月, 2008 13 次提交
-
-
由 Kumar Gala 提交于
Provide a board_lmb_reserve helper function to ensure we reserve the page of memory we are using for the boot page translation code. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
The following changes are needed to be inline with ePAPR v0.81: * r4, r5 and now always set to 0 on boot release * r7 is used to pass the size of the initial map area (IMA) * EPAPR_MAGIC value changed for book-e processors * changes in the spin table layout * spin table supports a 64-bit physical release address Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jon Loeliger 提交于
Each file that can be built here now follows some CONFIG_ option so that they are appropriately built or not, as needed. And CONFIG_ defines were added to various board config files to make sure that happens. The other board/freescale/*/Makefiles no longer need to reach up and over into ../common to build their individually needed files any more. Boards that are CDS specific were renamed with cds_ prefix. Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
由 Kumar Gala 提交于
ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 James Yang 提交于
Signed-off-by: NJames Yang <James.Yang@freescale.com> Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 James Yang 提交于
get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were called. However, get_sys_info() recalculates extraneous information when called each time. Have get_ddr_freq() and get_bus_freq() return memoized values from global_data instead. Signed-off-by: NJames Yang <James.Yang@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 James Yang 提交于
Show the DDR memory data rate in addition to the memory clock frequency. For DDR/DDR2 memories the memory data rate is 2x the memory clock. Signed-off-by: NJames Yang <James.Yang@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 James Yang 提交于
Speed up get_tbclk() by referencing pre-computed bus clock frequency value from global data instead of sys_info_t. Fix rounding of result to nearest; previously it was rounding upwards. Signed-off-by: NJames Yang <James.Yang@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Andy Fleming 提交于
FSL has taken to using SVR[16:23] as an SOC sub-version field. This is used to distinguish certain variants within an SOC family. To account for this, we add the SVR_SOC_VER() macro, and update the SVR_* constants to reflect the larger value. We also add SVR numbers for all of the current variants. Finally, to make things neater, rather than use an enormous switch statement to print out the CPU type, we create and array of SVR/name pairs (using a macro), and print out the CPU name that matches the SVR SOC version. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Andy Fleming 提交于
Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Kumar Gala 提交于
Added the cpu command that provides a generic mechanism to get status, reset, and release secondary cores in multicore processors. Added support for using the ePAPR defined spin-table mechanism on 85xx. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Kumar Gala 提交于
Added the cpu command that provides a generic mechanism to get status, reset, and release secondary cores in multicore processors. Added support for using the ePAPR defined spin-table mechanism on 85xx. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
When we go to 36-bit physical addresses we need to keep the concept of the physical CCSRBAR address seperate from the virtual one. For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 26 3月, 2008 27 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Joakim Tjernlund 提交于
The default settings for RTC DS1337 keeps the OSC output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to turn it off. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
git://www.denx.de/git/u-boot-testing由 Bartlomiej Sieka 提交于
Conflicts: common/cmd_bootm.c cpu/mpc8xx/cpu.c Signed-off-by: NBartlomiej Sieka <tur@semihalf.com>
-
由 Aras Vaichas 提交于
This patch changes the "usb storage" command to return success if it finds a USB storage device, otherwise it returns error. Signed-off-by: NMarkus Klotzbuecher <mk@denx.de>
-
由 Anton Vorontsov 提交于
Linux understands "host" (default), "peripheral" and "otg" (broken). Though, U-Boot doesn't restrict dr_mode variable to these values (think of renames in future). Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Anton Vorontsov 提交于
RTL8211B sets link state register after autonegotiation complete, so with bootdelay=0 RTL8211B will report lack of the link. To fix this, we should wait for aneg to complete, even if the link is currently down. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Anton Vorontsov 提交于
device_type = "soc" is being deprecated, newer device trees will use "fsl,soc" and/or "fsl,immr" for the soc nodes. This patch also adds clock-frequency property for soc nodes (the same value as bus-frequency). Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Joe D'Abbraccio 提交于
With the original value of 1/2 clock cycle delay, the system ran relatively stable except when we run benchmarks that are intensive users of memory. When I run samba connected disk with a HDBENCH test, the system locks-up or reboots sporadically. Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
-
由 Scott Wood 提交于
The device trees for these boards describe PCI I/O as starting from address zero from the device's perspective. Placing I/O elsewhere may cause problems with certain PCI boards, and may cause problems with Linux. Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Anton Vorontsov 提交于
At least on the "33MHz Pilot" board crystal is actually 33.3MHz. This patch fixes "system time drifting" problem. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
This is needed to update /choosen/linux,stdout-path properly. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
Plus modify environment to use it and remove bootfile env variable, it is internal and CONFIG_BOOTFILE is used for these purposes. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
Current DDR setup easily causes memory corruption, this patch fixes it. Also fix TIMING_CFG0_MRS_CYC definition. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen controller and FHCI (QE USB). Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
This is needed for BCM PHYs to work on this board. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
This patch adds basic support for Broadcom BCM5481 PHY. RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is Peter Barada <peterb@logicpd.com>. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
PHY drivers will use it to setup software delay between RXD and RXC signals. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
This is primarily for the early console support. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
On the MPC8377ERDB: 2 SATA and 2 PCI-E. On the MPC8378ERDB: 2 PCI-E On the MPC8379ERDB: 4 SATA Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
This patch adds few routines to configure serdes on 837x targets. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
..plus get rid of some #ifdefs in the .c files. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Anton Vorontsov 提交于
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-