- 08 5月, 2017 8 次提交
-
-
由 Uri Mashiach 提交于
Add CONFIG_CMD_USB to the defconfig file. Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Uri Mashiach 提交于
Add CONFIG_USB_STORAGE to the defconfig file. Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Uri Mashiach 提交于
USB bus scan attempt: ----------------------------------cut---------------------------------- => usb start starting USB... USB0: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 scanning bus 0 for devices... data abort pc : [<fff6240e>] lr : [<fff623b3>] reloc pc : [<8081b40e>] lr : [<8081b3b3>] sp : fdf42930 ip : fdf42960 fp : 00000000 r10: 00000001 r9 : fdf42ef0 r8 : 48890020 r7 : 00000002 r6 : fffa5840 r5 : fff8b140 r4 : fdf429c0 r3 : 00000000 r2 : 00000004 r1 : 00000000 r0 : 00000000 Flags: nZcv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... ----------------------------------cut---------------------------------- Fix by enabling USB configuration in the SPL. Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Uri Mashiach 提交于
Invoke enable_usb_clocks during board_usb_init and disable_usb_clocks during board_usb_exit to enable and disable clocks respectively. Modifications: * Enable USB clocks in the OMAP version of the function board_usb_init. * Disable USB clocks in the OMAP version of the function board_usb_cleanup. Cc: Marek Vasut <marex@denx.de> Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: NMarek Vasut <marex@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Uri Mashiach 提交于
A weak version of the function board_usb_init is implemented in: common/usb.c drivers/usb/host/xhci-omap.c To fix the double implementations: * Convert the board_usb_init function in drivers/usb/host/xhci-omap.c normal (not weak). * The function board_usb_init in drivers/usb/host/xhci-omap.c calls to the weak function omap_xhci_board_usb_init. * Rename board version of the function board_usb_init to omap_xhci_board_usb_init. Done only for boards that defines CONFIG_USB_XHCI_OMAP. To achieve the same flexibility with the function board_usb_cleanup: * Add a normal (not weak) implementation of the function board_usb_cleanup in drivers/usb/host/xhci-omap.c * The function board_usb_cleanup in drivers/usb/host/xhci-omap.c calls to the weak function omap_xhci_board_usb_cleanup. * Rename board version of the function board_usb_cleanup to omap_xhci_board_usb_cleanup. Done only for boards that defines CONFIG_USB_XHCI_OMAP. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Acked-by: NMarek Vasut <marex@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NRoger Quadros <rogerq@ti.com>
-
由 Uri Mashiach 提交于
Modify the determination of the base address of xHCI registers of DRA7XX targets. Before the commit: by the target. After the commit: by the USB port index. Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: NMarek Vasut <marex@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NRoger Quadros <rogerq@ti.com> Acked-by: NMarek Vasut <marex@denx.de> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Uri Mashiach 提交于
The symbol CONFIG_DRA7XX is needed for Kconfig conditions. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NUri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 06 5月, 2017 7 次提交
-
-
由 xypron.glpk@gmx.de 提交于
The logical expression to check the dtb is incorrect in load_devicetree. The problem was indicated by cppcheck. The inconsistent variable name dtppart is changed to dtbpart. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NHannes Schmelzer <oe5hpm@oevsv.at> Acked-by: NHannes Schmelzer <oe5hpm@oevsv.at>
-
由 xypron.glpk@gmx.de 提交于
The evaluation of option -c is incorrect: According to the C99 standard endptr in the first strtol is always set as &endptr is not NULL. So the first part of the or condition is always true. If all digits in optarg are valid endptr will point to the closing \0 and the second strtol will read beyond the end of the string optarg points to. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
-
由 xypron.glpk@gmx.de 提交于
va_start must always be matched by va_end. The problem was indicated by cppcheck. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 xypron.glpk@gmx.de 提交于
We should not first dereference p and afterwards assert that is was not NULL. Instead do the assert first. The problem was indicated by cppcheck. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 xypron.glpk@gmx.de 提交于
In dram_init_banksize there seems to be a typo concerning a plausibility check of the fdt. Testing sc > 2 twice does not make any sense. The problem was indicated by cppcheck. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 xypron.glpk@gmx.de 提交于
A feature rich Linux kernel needs more than 8 MiB. Hence enlarge CONFIG_SYS_BOOTM_LEN to 64 MiB for the GXBB systems. As all known GXBB systems have at least 512 MiB of RAM this poses no problem. Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
-
- 03 5月, 2017 3 次提交
-
-
由 Suniel Mahesh 提交于
.probe method has been assigned twice when declaring a driver with U_BOOT_DRIVER(). Removed one of them. Here is the last commit which had the duplicate entry: "spi: omap3: Convert to driver model" (sha1: 77b8d048) Signed-off-by: NSuniel Mahesh <suniel.spartan@gmail.com> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
由 Moritz Fischer 提交于
This is not currently implemented. Add support for this so that the Chrome OS EC can be used reliably. Signed-off-by: NMoritz Fischer <moritz.fischer@ettus.com> Acked-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
由 Wenyou Yang 提交于
Before using the cs_gpio, check if the GPIO is valid or not. Signed-off-by: NWenyou Yang <wenyou.yang@atmel.com> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
- 02 5月, 2017 3 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 xypron.glpk@gmx.de 提交于
Mention eMMC and microSD as supported devices. They have been enabled with patch d0c5c8d5 odroid-c2: enable new Meson GX MMC driver in board defconfig which was accepted for u-boot-mmc.git. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 xypron.glpk@gmx.de 提交于
0x10000000 is the start of a 2 MiB area used by the ARM Trusted Firmware (BL31). See https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/arch/arm64/boot/dts/amlogic/meson-gx.dtsi?id=refs/tags/v4.10.10 So we should not load the ramdisk here. The legacy Ubuntu image for the Odroid C2 comes with the following line in boot.ini: setenv initrd_loadaddr "0x13000000" See http://odroid.in/ubuntu_16.04lts/ubuntu64-16.04-minimal-odroid-c2-20160815.img.xz http://deb.odroid.in/c2/pool/main/u/u-boot/u-boot_20170226-752a100-8_arm64.deb So let's use the same address. With the patch booting Linux with booti succeeds on an Odroid C2, without the patch Linux hangs. Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org> Tested-by: NVagrant Cascadian <vagrant@debian.org>
-
- 01 5月, 2017 19 次提交
-
-
由 xypron.glpk@gmx.de 提交于
To enable automatic booting from SD card or eMMC the MMC devices 0, 1, and 2 are added to the BOOT_TARGET_DEVICES. Booting from SD card, eMMC, and DHCP are tried in sequence. A missing or failing device is gracefully handled. Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: NVagrant Cascadian <vagrant@debian.org> Reviewed-by: NAndreas Färber <afaerber@suse.de> Tested-by: NAndreas Färber <afaerber@suse.de>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Fabio Estevam 提交于
Add warp7_secure_defconfig entry to avoid the following warning: WARNING: no maintainers for 'warp7_secure' Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Tom Rini 提交于
With 3f66149d we no longer have a common call fdt_fixup_ethernet. This was fine to do on PowerPC as they largely had calls already in ft_cpu_fixup. On ARM however we largely relied on this call. Rather than introduce a large number of changes to ft_cpu_fixup / ft_board_fixup we recognize that this is a common enough call that we should be doing it in a central location. Do it early enough that we can do any further updates in ft_cpu_fixup / ft_board_fixup. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thomas Chou <thomas@wytron.com.tw> (maintainer:NIOS) Cc: York Sun <york.sun@nxp.com> (maintainer:POWERPC MPC85XX) Cc: Stefan Roese <sr@denx.de> (maintainer:POWERPC PPC4XX) Cc: Simon Glass <sjg@chromium.org> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Fixes: 3f66149d ("Remove extra fdt_fixup_ethernet() call") Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NYork Sun <york.sun@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Chris Packham 提交于
Signed-off-by: NChris Packham <judge.packham@gmail.com> [trini: default y if DM_RTC, re-sync] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This is not used in U-Boot. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This is not used in U-Boot. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_DISPLAY Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_DIAG Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: imply CMD_DIAG on some keymile configs] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This option is not used in U-Boot. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_DEKBLOB Note: This option does not seem to actually be enabled by any board. Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: imply under SECURE_BOOT for mx5/6/7] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This option does not exist in U-Boot. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Rather than using CMD_CRAMFS for both the filesystem and its command, we should have a separate option for each. This allows us to enable CRAMFS support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: imply FS_CRAMFS for keymile] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_CRAMFS Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: imply CMD_CRAMFS for keymile] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_CLK Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: imply CMD_CLK on ARCH_ZYNQ] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This option is not used in U-Boot. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_CMD_CHIP_CONFIG Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Rather than using CMD_CBFS for both the filesystem and its command, we should have a separate option for each. This allows us to enable CBFS support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: imply FS_CBFS on SYS_COREBOOT] Signed-off-by: NTom Rini <trini@konsulko.com>
-