commit 04e11cf3 "rtc: add support for 4543 RTC (manufactured by e.g.
EPSON)" introduces the following build error on boards configuring e.g,
the ds1374 rtc:

Configuring for MPC837XEMDS board...
ds1374.c:103: error: static declaration of 'rtc_read' follows non-static declaration
/home/r1aaha/git/u-boot/include/rtc.h:64: error: previous declaration of 'rtc_read' was here
ds1374.c:104: error: conflicting types for 'rtc_write'
/home/r1aaha/git/u-boot/include/rtc.h:65: error: previous declaration of 'rtc_write' was here

this reverts the erroneous chunk.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Acked-by: NDetlev Zundel <dzu@denx.de>
CC: Detlev Zundel <dzu@denx.de>
CC: Andreas Pfefferle <ap@denx.de>

We had a bug on 86xx in which the boot page used to bring up secondary
cores was being overwritten and used for the malloc region in u-boot.

We need to reserve the region of memory that the boot page is going to
be put at so nothing uses it.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NBecky Bruce <beckyb@kernel.crashing.org>

Match determine_mp_bootpg() that was added for 86xx.  We need this to
address a bug introduced in v2009.03 with 86xx MP booting.  We have to
make sure to reserve the region of memory used for the MP bootpg() so
other u-boot code doesn't use it.

Also added a comment about how cpu_reset() is dealing w/an errata on
early 85xx MP HW.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* Use CONFIG_MP instead of CONFIG_NUM_CPUS to match 85xx
* Introduce determine_mp_bootpg() helper.  We'll need this to address a
  bug introduced in v2009.03 with 86xx MP booting.  We have to make sure
  to reserve the region of memory used for the MP bootpg() so other
  u-boot code doesn't use it.
* Added dummy versions of cpu_reset(), cpu_status() & cpu_release() to
  allow cmd_mp.c to build and work. In the future we should look at
  implementing all these functions. This could be common w/85xx if we
  use spin tables on 86xx.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

We're missing the board_lmb_reserve definitions that allow
cpu_mp_lmb_reserve to be called; this means that Linux
is free to reallocate reserved pages.  Linux currently boots
because we're getting lucky - the page we've reserved is
high enough in memory that it isn't allocated by Linux
while we still need it to be in existence.
Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch adds MPC8569MDS board support. The UART, QE UEC1 and UEC2, BRD
EEPROM on I2C2 bus, PCI express and DDR3 SPD are supported in this patch.
Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: NHillel Avni <Hillel.Avni@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

There is a workaround for MPC8569 CPU Errata, which needs to set Bit 13 of
LBCR in 4K bootpage. We setup a temp TLB for eLBC controller in bootpage,
then invalidate it after LBCR bit 13 is set.
Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

For the silicon which doesn't have ROM support in QE, it always needs to load
a pre-built ucode binary to IRAM so that QE can work.
Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: NHillel Avni <Hillel.Avni@freescale.com>

* Enable backside L2
* e500mc no longer has timebase enable in HID (moved to CCSR register)
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

- support mirrored DIMMs, not support register DIMMs
- test passed on P2020DS board with MT9JSF12872AY-1G1D1
- test passed on MPC8569MDS board with MT8JSF12864HY-1G1D1
Signed-off-by: NDave Liu <daveliu@freescale.com>
Signed-off-by: NTravis Wheatley <travis.wheatley@freescale.com>

1. wr_lat
   UM said the total write latency for DDR2 is equal to
   WR_LAT + ADD_LAT, the write latency is CL + ADD_LAT - 1.
   so, the WR_LAT = CL - 1;
2. rd_to_pre
   we missed to add the ADD_LAT for DDR2 case.
Reported-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: NDave Liu <daveliu@freescale.com>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NKim Phillips <kim.phillips@freescale.com>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The masks for various bit defines of LSDMR are common and thus we can
define them in one place rather than replicating them in each config.h
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NDetlev Zundel <dzu@denx.de>

This patch adds the board specific communication routines needed by
the external 4543 RTC.
Signed-off-by: NDetlev Zundel <dzu@denx.de>
Signed-off-by: NAndreas Pfefferle <ap@denx.de>

This patch adds advanced diagnosis functions for the inka4x0 board.
Signed-off-by: NAndreas Pfefferle <ap@denx.de>
Signed-off-by: NDetlev Zundel <dzu@denx.de>

Signed-off-by: NDetlev Zundel <dzu@denx.de>
Signed-off-by: NAndreas Pfefferle <ap@denx.de>

This pretty unintelligent interface is used on some RTC chips.
Signed-off-by: NDetlev Zundel <dzu@denx.de>

Fix these:
cmd_vcma9.c:82: warning: implicit declaration of function 'eth_getenv_enetaddr'
cmd_vcma9.c:89: error: 'enetaddr' undeclared (first use in this function)
Signed-off-by: NWolfgang Denk <wd@denx.de>

This warning got issued for all ARM systems that don't have
CONFIG_CMD_NET enabled.
Signed-off-by: NWolfgang Denk <wd@denx.de>

cs8900.c: In function 'eth_init':
cs8900.c:164: warning: passing argument 2 of 'eth_getenv_enetaddr' from incompatible pointer type
cs8900.c:165: error: invalid operands to binary <<
cs8900.c:166: error: invalid operands to binary <<
cs8900.c:167: error: invalid operands to binary <<
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

...and some other compile warnings.
Signed-off-by: NWolfgang Denk <wd@denx.de>

Also minor coding style cleanup.
Signed-off-by: NWolfgang Denk <wd@denx.de>

Other commands implementing subcommands can reuse this code nicely.
Signed-off-by: NDetlev Zundel <dzu@denx.de>
Signed-off-by: NAndreas Pfefferle <ap@denx.de>

Signed-off-by: NDetlev Zundel <dzu@denx.de>

Signed-off-by: NDetlev Zundel <dzu@denx.de>

Signed-off-by: NDetlev Zundel <dzu@denx.de>

The function is called "eth_setenv_enetaddr", not "eth_putenv_enetaddr".
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>

Current u-boot top of tree builds with warnings/errors for
the following boards:

ads5121 cpci5200 mecp5200 v38b IAD210 MBX MBX860T NX823
RPXClassic debris PN62

following patch solves this.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Acked-by: NMike Frysinger <vapier@gentoo.org>

This patch fixes a bug in the Sequoia TLB init code to reconfigure
the correct TLB (boot space) after running from RAM. This bug was
introduced with patch 4d332dbe
[ppc4xx: Make Sequoia boot vxWorks] which changed the order of the
TLB in the Sequoia init.S file.
Signed-off-by: NStefan Roese <sr@denx.de>

Enabling the instruction cache significantly accelerates U-Boot
operations like CRC checking, image uncompression, etc.

Kudos to Andrea Scian for pointing out.
Signed-off-by: NWolfgang Denk <wd@denx.de>

On boards which have the environment in eeprom, i2c_init() is called
before the console and RAM are initialized.
Suppress printfs until the console is initialized.
Signed-off-by: NJon Smirl <jonsmirl@gmail.com>
Acked-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

http://www.denx.de/wiki/DULG/UBootCmdGroupFlash#UBootCmdFlMtdparts
provides a flexible way to create and maintain u-boot mtd
partitions. This allows commands such as "nand erase fs"
to work and the user no longer needs to decode the absolute
nand offsets. This patch enables this function for beagleboard
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>