- 22 1月, 2010 2 次提交
-
-
- 20 1月, 2010 6 次提交
-
-
由 Magnus Lilja 提交于
Signed-off-by: NMagnus Lilja <lilja.magnus@gmail.com>
-
由 Magnus Lilja 提交于
Import the large page oob layout from Linux mxc_nand.c driver. The CONFIG_SYS_NAND_LARGEPAGE option is used to activate the large page oob layout. Run time detection is not supported as this moment. This has been tested on the i.MX31 PDK board with a large page NAND device. Signed-off-by: NMagnus Lilja <lilja.magnus@gmail.com>
-
由 Magnus Lilja 提交于
Tested on i.MX31 Litekit. Signed-off-by: NMagnus Lilja <lilja.magnus@gmail.com>
-
由 Magnus Lilja 提交于
Signed-off-by: NMagnus Lilja <lilja.magnus@gmail.com>
-
由 Michal Simek 提交于
Microblaze has own hw unaligned handler if is available. Use big endian version. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Commit 6a45e384 should remove reference from Microblaze too. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 19 1月, 2010 3 次提交
-
-
由 Alessandro Rubini 提交于
Signed-off-by: NAlessandro Rubini <rubini@unipv.it>
-
由 Ben Warren 提交于
Commit 6a45e384 (Make getenv_IPaddr() global) inadvertently added ' #include "net.h" ' to the standalone programs, creating duplicate definitions of 'struct eth_device'. This patch removes the local definitions and removes other code that breaks due to the change in definition. Signed-off-by: NBen Warren <biggerbadderben@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org>
-
由 Daniel Hobi 提交于
During parallel build, the top Makefile spawns multiple sub-makes for targets in cpu/$(CPU) and $(dir $(LDSCRIPT)). If the .depend files are not present in these directories, the sub-makes may end up generating these files simultaneously which leads to corrupted content. A typical error message is: .depend:39: *** multiple target patterns. Stop. This patch serializes the creation of .depend in cpu/$(CPU) and $(dir $(LDSCRIPT)) by adding these directories to the depend target in the top Makefile. Other directories in $(LIBS) are not affected since they contain only one Make target and thus only one sub-make is spawned per directory. Signed-off-by: NDaniel Hobi <daniel.hobi@schmid-telecom.ch> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 18 1月, 2010 20 次提交
-
-
由 Robin Getz 提交于
Signed-off-by: NRobin Getz <robin.getz@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Robin Getz 提交于
We need signal.h for Blackfin/KGDB, so import the asm-generic/signal.h for people to leverage. Signed-off-by: NRobin Getz <robin.getz@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Heiko Schocher 提交于
cramfsls and cramfsload are added to the command list. A cramfs placed at 'cramfs_addr' can the be listed with 'cramfsls' and files can be loaded with 'cramfsload'. 'cramfs_addr' is an environment variable specifying the address the cramfs is located. This works for powerpc and for ARM. Use CONFIG_CMD_CRAMFS. Signed-off-by: NAndreas Huber <andreas.huber@keymile.com> Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
- malloc size 4 MB for all keymile boards - use generic FDT code for fixing up the DTS - enable unit-led at startup for keymile boards - remove some dts updates for keymile boards - ppc_83xx, kmeter1: take FE/GbE PHYs out of reset - ppc_83xx, kmeter1: change from Intel Strata to Spansion 64MB flash changed from Intel Strata to Spansion 64MB flash and changed flash layout. +---------+----------+-----------------------+-----------------------------+ | name | size | range | description | +---------+----------+-----------------------+-----------------------------+ | u-boot | 768 KB | 0xf0000000-0xf00bffff | for u-boot | | env | 128 KB | 0xf00c0000-0xf00dffff | for environment | | envred | 128 KB | 0xf00e0000-0xf00fffff | for environment (redundant) | | ubi0 | 64512 KB | 0xf0100000-0xf3ffffff | ubi0 for ubi volumes | +---------+----------+-----------------------+-----------------------------+ Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Add redundant environment support for environment lying on a EEPROM. Tested on uppcoming suen3 support Signed-off-by: NAndreas Huber <andreas.huber@keymile.com>
-
由 Heiko Schocher 提交于
- CONFIG_ENV_EEPROM_IS_ON_I2C define this, if you have I2C and SPI activated, and your EEPROM, which holds the environment, is on the I2C bus. - CONFIG_I2C_ENV_EEPROM_BUS if you have an Environment on an EEPROM reached over I2C muxes, you can now define, how to reach this EEPROM. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Matthias Kaehlcke 提交于
the macros likely and unlikely were defined in include/linux/mtd/compat.h, but used in code not related to MTD. moved the macro definitions to compiler.h Signed-off-by: NMatthias Kaehlcke <matthias@kaehlcke.net>
-
由 Detlev Zundel 提交于
Current code uses the second argument to bootm for standalone images to override the load address specified in the image instead of passing all parameters as is to the application. This behaviour is not documented and not in line with how the go command works for standalone applications, so we simply drop it. Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Detlev Zundel 提交于
In case we boot an image marked as 'standalone' and 'linux', the current code erroneously tried to load a ramdisk. Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Robin Getz 提交于
Convert the funcs to do the conversion inline so that we can do the copy all at once with memcpy. This let's us push out an weird arch-specific issue with accessing different regions of memory to the memcpy function like the MMRs on Blackfin systems, and it should be a bit faster. Signed-off-by: NRobin Getz <robin.getz@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The debugger_exception_handler definition is the same for everyone, so use the common one now. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Robin Getz 提交于
The default kgdb functions can be implemented with common U-Boot functions, so rather than force everyone to copy & paste these things, create a set of weak stubs. Signed-off-by: NRobin Getz <robin.getz@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Detlev Zundel 提交于
Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Detlev Zundel 提交于
Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Mike Frysinger 提交于
There are a bunch of features in U-Boot that we want to enable by default, and it's best if we centralize them in one place rather than updating all the board files out there. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
-
由 Peter Tyser 提交于
When referring to PCIe and USB 'endpoint' is the standard naming convention. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NRemy Bohmer <linux@bohmer.net>
-
由 Dirk Behme 提交于
There are boards out there that do not have network support in U-Boot (CONFIG_CMD_NET not set), but they do so in Linux. This makes it desirable to be able to port network configuration (like the IP address) to the Linux kernel. We should not make the passing of the IP configuration to Linux dependent on U-Boot features / settings. For this, make getenv_IPaddr() global. This fixes build error u-boot/lib_xxx/board.c:360: undefined reference to `getenv_IPaddr' on various architectures. Signed-off-by: NDirk Behme <dirk.behme@googlemail.com> Acked-by: NBen Warren <biggerbadderben@gmail.com>
-
- 17 1月, 2010 9 次提交
-
-
由 Mike Frysinger 提交于
Nothing in U-Boot uses runtime C++ exceptions/unwinding, so there is no need to list this section. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
This is just Blackfin catching up with every one else. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Harald Krapfenbauer 提交于
Signed-off-by: NHarald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The addition of KGDB overflowed the current linker section. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Robin Getz 提交于
Need to reload the loop counters to keep from corrupting hardware loops. Signed-off-by: NRobin Getz <robin.getz@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Robin Getz 提交于
Crashes rarely happen in the CPLB miss handler compared to the rest of U-Boot code, so disable hardware tracing when processing misses. This way a crash due to other functions will be shown properly. Signed-off-by: NRobin Getz <robin.getz@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Robin Getz 提交于
Signed-off-by: NRobin Getz <robin.getz@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Michael Hennerich 提交于
The new board revision has a different LCD. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-