- 01 9月, 2021 20 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_RAMBOOT_PBL CONFIG_SYS_FSL_PBL_PBI CONFIG_SYS_FSL_PBL_RCW Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_QSPI_BOOT Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_FSL_DDR4 Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The symbol CONFIG_IMX_NAND is not referenced in the code, remove it. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Rather than using CONFIG_SABRELITE to set FDTFILE for only that platform, switch to always setting this based on CONFIG_DEFAULT_DEVICE_TREE as this should always match the kernel device tree name anyhow. Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NTroy Kisky <troy.kisky@boundarydevices.com>
-
由 Tom Rini 提交于
Move the CONFIG_DDR_MB symbol to Kconfig. A later clean-up would be to make dynamic memory size detection work based on how this is done on other i.MX6 platforms. Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NTroy Kisky <troy.kisky@boundarydevices.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SPL Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Currently, there is no over-arching symbol for access to arch/arm/mach-imx nor the CONFIG symbols that are common over all of these related platforms. This new CONFIG symbol will allow us to start down this path. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_MX7D Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NRick Chen <rick@andestech.com>
-
由 Tom Rini 提交于
- In most of the codebase, we reference CONFIG_SYS_LOAD_ADDR and not CONFIG_LOADADDR. - Generally, CONFIG_SYS_LOADADDR is set to CONFIG_LOADADDR and then as noted, we use CONFIG_SYS_LOADADDR. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
All platforms define CONFIG_SYS_LOAD_ADDR, but only some define CONFIG_LOADADDR. Very very rarely are these not the same address, and qemu-ppce500 is one such case. However, based on reading the history of the code, this mismatched value was simply a copy-paste from other PowerPC platforms where it is this unused currently. Switch the code to use CONFIG_SYS_LOAD_ADDR and update the documentation. Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- Guard most of the options in drivers/ddr/fsl/Kconfig with SYS_FSL_DDR || SYS_FSL_MMDC. - Migrate FSL_DMA, DDR_ECC, DDR_ECC_CMD, and ECC_INIT_VIA_DDRCONTROLLER to Kconfig. - Clean up the logic for including the DDR_ECC_CMD code. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
As this symbol can either be a fixed value or the function get_board_ddr_clk, migration is tricky. Introduce a choice of DYNAMIC or STATIC_DDR_CLK_FREQ. If DYNAMIC, we continue to use the board defined get_board_ddr_clk function. If STATIC, set CONFIG_DDR_CLK_FREQ to that value and now include/clock_legacy.h contains the function prototype or defines get_board_ddr_clk() to that static value. Update callers to test for DYNAMIC or STATIC. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Move the symbol that controls building some JEDEC SPD support functions to Kconfig. This is required on the TI keystone 2 platforms and very frequently (but not always) used on large number of Freescale/NXP platforms, so use imply there. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Move this specific option to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
We have a number of CONFIG symbols to express the fixed size of system memory. For now, rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE and adjust usage to match that CONFIG_SYS_SDRAM_SIZE expects the entire size rather than MiB. Cc: Marek Behún <marek.behun@nic.cz> Cc: Stefan Roese <sr@denx.de> Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NMarek Behún <marek.behun@nic.cz>
-
由 Tom Rini 提交于
Move CONFIG_DDR_32BIT/64BIT to Kconfig as a choice for Armada XP platforms. Make 64bit the default as this mirrors the current code. Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NMarek Behún <marek.behun@nic.cz> Reviewed-by: NStefan Roese <sr@denx.de>
-
- 31 8月, 2021 20 次提交
-
-
由 Tom Rini 提交于
These symbols are now either unused or were only used within the config file to determine other logic, which could be done in a way that doesn't further pollute the CONFIG namespace. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- Begin merging some Kconfig migration, and CONFIG namespace cleanup series in. This gives us: - A number of I2C symbols migrated over - DWC2, i8042, altera_spi and a few other areas updated to use CFG not CONFIG for the concept of "configuration space" defines. - Rename CONFIG_EXTRA_ENV_BOARD_SETTINGS to EXTRA_ENV_BOARD_SETTINGS - Some dead code removal. - Rename a number of CONFIG symbols that were only referenced within the config header to not use CONFIG as a prefix.
-
由 Tom Rini 提交于
While the Kconfig language seems to accept either form of whitespace, we use a space throughout the project, except in these spots. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Rather than using CONFIG namespace for logic internal to include/configs/astro_mcf5373l.h to select ASTRO_ID (and populate the default environment), strip CONFIG from the various options used and set. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Update the comment here to refer to PCI_CONFIG_ADDRESS rather than CONFIG_ADDRESS. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
The value CONFIG_ALTERA_SPI_IDLE_VAL is never re-defined by a board. Rename this to ALTERA_SPI_IDLE_VAL. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
This driver is currently unused. Remove. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
This removes a number of spots of dead code based on symbols that start with CONFIG_[0-9] or CONFIG_A. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This driver uses the CONFIG namespace to set the chips internal CONFIG namespace related bits. However, CONFIG is reserved for the top-level Kconfig based configuration system. Use CFG as the namespace here instead to avoid pollution. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
There are an assortment of hard-coded CONFIG_BOOTCOMMAND options in some board headers. Rework these so that they do not add to the CONFIG namespace. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Migrate CONFIG_GICV2 and CONFIG_GICV3 to Kconfig. We still have the GIC related registers that need to be handled more cleanly but start by moving this symbol to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This driver uses the CONFIG namespace to set the chips internal CONFIG namespace related bits. However, CONFIG is reserved for the top-level Kconfig based configuration system. Use CFG as the namespace here instead to avoid pollution. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
The platforms this code was for have been removed, drop this support code as well. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
These sections are no longer relevant, remove. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_I2C_SET_DEFAULT_BUS_NUM CONFIG_I2C_DEFAULT_BUS_NUMBER Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Remove the irrelevant section from the README and remove the non-functional SPL-undef section. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- As there are no boards that use different values for speed / slave on different buses, use a single option. - Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options. - Introduce _HAS_ options for additional buses as only the first one is common to all users. - Convert all remaining symbols to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- Migrate SYS_I2C_SH and related defines to Kconfig - Remove currently unused SYS_I2C_SH related defines - Cleanup related README section. Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: NTom Rini <trini@konsulko.com>
-