- 26 3月, 2008 4 次提交
-
-
由 Kyungmin Park 提交于
Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array using a NOR Flash interface. This on-chip integration enables system designers to reduce external system logic and use high-density NAND Flash in applications that would otherwise have to use more NOR components. Flex-OneNAND enables users to configure to partition it into SLC and MLC areas in more flexible way. While MLC area of Flex-OneNAND can be used to store data that require low reliability and high density, SLC area of Flex-OneNAND to store data that need high reliability and high performance. Flex-OneNAND can let users take advantage of storing these two different types of data into one chip, which is making Flex-OneNAND more cost- and space-effective. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 25 3月, 2008 4 次提交
-
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
由 Shinya Kuribayashi 提交于
Signed-off-by: NShinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-
- 15 3月, 2008 3 次提交
-
-
由 Stefan Roese 提交于
460EX doesn't support a fixed bootstrap option to boot from 512 byte page NAND devices. The only bootstrap option for NAND booting is option F for 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap EEPROM needs to be programmed accordingly. This patch adds basic NAND booting support for the AMCC Canyonlands aval board and also adds support to the "bootstrap" command, to enable NAND booting I2C setting. Tested with 512 byte page NAND device (32MByte) on Canyonlands. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch adds support for the AMCC Canyonlands 460EX evaluation board. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Niklaus Giger 提交于
Signed-off-by: NNiklaus Giger <niklaus.giger@netstal.com>
-
- 14 3月, 2008 1 次提交
-
-
由 Bartlomiej Sieka 提交于
Signed-off-by: NBartlomiej Sieka <tur@semihalf.com>
-
- 09 3月, 2008 3 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
and simplify Makefile a bit. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 04 3月, 2008 1 次提交
-
-
由 Wolfgang Denk 提交于
Commit 5013c09f (Makefile: cleanup "clean" target) introduced a problem for out-of-tree builds which caused "make clean" to fail. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 03 3月, 2008 5 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Make sure CDPATH settings cannot interfere. Update CHANGELOG. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Li Yang 提交于
Add cscope build target to generate cscope database for code browsing. Signed-off-by: NLi Yang <leoli@freescale.com>
-
由 John Rigby 提交于
Adds PCI support for MPC5121 Tested with drivers/net/rtl8139.c Support is conditional since PCI on old silicon does not work. ads5121_PCI_config turns on PCI In this version, condition compilation of PCI code has been moved from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as suggested by Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: NJohn Rigby <jrigby@freescale.com>
-
- 29 2月, 2008 1 次提交
-
-
由 Bartlomiej Sieka 提交于
Signed-off-by: NBartlomiej Sieka <tur@semihalf.com>
-
- 24 2月, 2008 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 22 2月, 2008 3 次提交
-
-
由 Mike Frysinger 提交于
If any of the steps for generating autoconf.mk fail currently, they go unnoticed. To fix, we can simply add 'set -e' to the long list of commands. This is simpler and more robust than placing '|| exit $$?' after every line. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Stefano Babic 提交于
By adding VERSION_FILE to the PHONY targets the script /tools/setlocalversion is always called and version_autogenerated.h is replaced only if the script find a modified source file. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Mike Frysinger 提交于
If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds), then change into the board directory and try and create it. This allows you to generate the linker script on the fly based upon board defines (like the Blackfin boards do). There should be no regressions due to this change as the normal case is to already have a u-boot.lds file. If that's the case, then there's nothing to generate, and so make will always exit. The fix here is that if the linker script does not exist, the implicit rules take over and attempt to guess how to generate the file. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 21 2月, 2008 1 次提交
-
-
由 TsiChungLiew 提交于
Signed-off-by: NJames Mahan <kmahan@freescale.com> Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>
-
- 15 2月, 2008 3 次提交
-
-
由 Wolfgang Denk 提交于
-
由 Mike Frysinger 提交于
Constantly rebuilding the version header will force useless relinking, so we simply need to compare the new header with the existing one before updating it. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Kyungmin Park 提交于
This patch enables the OneNAND boot within U-Boot. Before this work, we used another OneNAND IPL called X-Loader based on open source. With this work, we can build the oneboot.bin image without other program. The build sequence is simple. First, it compiles the u-boot.bin Second, it compiles OneNAND IPL Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin The mechanism is similar with NAND boot except it boots from itself. Another thing is that you can only use the OneNAND IPL only to work other bootloader such as RedBoot and so on. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 14 2月, 2008 7 次提交
-
-
由 Haavard Skinnemoen 提交于
We already have a vendor subdir for Atmel, so we should use it. Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
-
由 Timo Tuunainen 提交于
Kimmo Leppala / Sysart and Timo Tuunainen / Sysart
-
由 Stelian Pop 提交于
AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory. Signed-off-by: NStelian Pop <stelian@popies.net>
-
由 Stelian Pop 提交于
Signed-off-by: NStelian Pop <stelian@popies.net>
-
由 Peter Pearse 提交于
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>
-
由 Niklaus Giger 提交于
Signed-off-by: NNiklaus Giger <niklaus.giger@netstal.com>
-
由 Johannes Stezenbach 提交于
Signed-off-by: NJohannes Stezenbach <js@sig21.net>
-
- 07 2月, 2008 1 次提交
-
-
由 Marian Balakowicz 提交于
- Add inline helper macros for basic header processing - Move common non inline code common/image.c - Replace direct header access with the API routines - Rename IH_CPU_* to IH_ARCH_* Signed-off-by: NMarian Balakowicz <m8@semihalf.com>
-
- 05 2月, 2008 2 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-