Compiling the overlay unit test fails with odroid-c2_defconfig showing
errors like:

    test/overlay/cmd_ut_overlay.c:29:8:
    error: unknown type name ‘fdt32_t’

Add the missing include.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Currently in pmecc_get_sigma(), the code tries to clear the memory
pointed by smu with wrong size 'sizeof(int16_t) * ARRAY_SIZE(smu)'.
Since smu is actually a pointer, not an array, so ARRAY_SIZE(smu)
does not generate correct size to be cleared.

In fact, GCC 8.1.0 reports a warning against it:

error: division 'sizeof (int16_t * {aka short int *}) / sizeof (int16_t
{aka short int})' does not compute the number of array elements
[-Werror=sizeof-pointer-div]

Fix it by using the correct size.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NMiquel Raynal <miquel.raynal@bootlin.com>

Add default bootargs for the MMC defconfig to use SD-Card as rootfs
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>

Add the default kernel bootargs according to our NAND flash demo layout:
http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d2PtcEKMainPage#NAND_Flash_demo_Memory_mapSigned-off-by: NEugen Hristev <eugen.hristev@microchip.com>

Enable onewire support and commands, fdt overlay for the emmc defconfig.
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>

Enable onewire support and commands, fdt overlay for the mmc1 defconfig.
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>

Enable iminfo command with CONFIG_CMD_IMI
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>

Enabled FIT image support and iminfo command for FIT information.
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>

When booting and CPU is detected from cpuid, we also need an environment
variable that will be used in boot commands to load the proper devicetree.
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>

In my haste to migrate SPL to DM, I copied the wrong name.
While it really doesn't matter, I'd prefer the name to match
the board, so am335x_mmc0 is now called omap3_logic_mmc0
Signed-off-by: NAdam Ford <aford173@gmail.com>

With the new omap_serial driver, this patch uses this instead
from the former ns16550_serial driver.  Even though the
omap_serial driver is essentially the same.
Signed-off-by: NAdam Ford <aford173@gmail.com>

With the DM_USB working for USB host features, encapsulate the
USB gadget initialization in a precomiler check.  If DM is enabled,
we don't need to manually initialize the MUSB driver.
Signed-off-by: NAdam Ford <aford173@gmail.com>

The default timings are assumming an OMAP36 / AM37 / DM37, but
the OMAP35 controller is a bit slower, so DDR may operate out of
spec when under stress.  This patch checks the processor type and
sets the DDR timings according to processor type.

Fixes: 5ad4212c ("ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV
and OMAP35 Torpedo")
Signed-off-by: NAdam Ford <aford173@gmail.com>

The da850evm does not need this enabled, so this removes a
notice that appears during compile time that says
"Please remove"
Signed-off-by: NAdam Ford <aford173@gmail.com>

Add test which checks if a PCI device described in DT with an
entry and reg = <...> property, but without compatible string
results in a valid U-Boot PCI udevice with the udevice.node
populated with reference to this DT node. Also check if the
other PCI device without a DT node does not contain any bogus
udevice.node.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Add PCI entry without compatible string and with a DT node only with
reg = <...> property into the DT. This is needed for the tests to
verify whether such a setup creates an U-Boot PCI device with the
DT node associated with it in udevice.node.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

Reword the documentation to make it clear the compatible string is now
optional, yet still matching on it takes precedence over PCI IDs and
PCI classes.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

The PCI controller can have DT subnodes describing extra properties
of particular PCI devices, ie. a PHY attached to an EHCI controller
on a PCI bus. This patch parses those DT subnodes and assigns a node
to the PCI device instance, so that the driver can extract details
from that node and ie. configure the PHY using the PHY subsystem.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

%s/CMD_RET_SUCCESX/CMD_RET_SUCCESS/g
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

This converts the following to Kconfig:
   CONFIG_FLASH_CFI_DRIVER
   CONFIG_SYS_FLASH_USE_BUFFER_WRITE
   CONFIG_FLASH_CFI_MTD
   CONFIG_SYS_FLASH_PROTECTION
   CONFIG_SYS_FLASH_CFI
Signed-off-by: NAdam Ford <aford173@gmail.com>
[trini: Re-migrate]
Signed-off-by: NTom Rini <trini@konsulko.com>

To make testing with clang support easier, add sandbox/clang-7
combination to our testing matrix.  To facilitate this, switch to using
the "sources" method that the travis.yml file supports to list
additional repositories and add the official one for llvm-7.  Due to
buildman not supporting using clang at this time add logic to manually
build a single sandbox configuration in the expected output directory so
that we can still invoke all of our tests.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add new Kconfig option, SYS_BOOTCOUNT_MAGIC, to select the boot
counter magic word. This can be useful ie. in case the entire
boot counter register is not usable.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>

Currently this uses x86_64 version toolchain for x86 build in
travis-ci. Change it to i386 version to avoid updating the
buildman toolchain path every time when the toolchain version
number is changed, eg: from 7.3.0 to 8.1.0.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

or32 is not supported by U-Boot anymore.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

This value is unly used in arch/arm/mach-omap2/am33xx/
clock_am33xx.c, so let's make it dependent on AM33XX since
that is the only way this file gets compiled into the code
according to the Makefile.
Signed-off-by: NAdam Ford <aford173@gmail.com>
Reviewed-by: NTom Rini <trini@konsulko.com>
[trini: Fix symbol name]
Signed-off-by: NTom Rini <trini@konsulko.com>

The option has never existed and config whitelist script accumulates
it from a comment block, wipe it out from the source code.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

The option is unused, SPL image gets a wanted boot device by standard
spl_boot_device() call.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

The CONFIG_LPC32XX_SPL option from board include file has never been
used, it is safe to remove it.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

To prevent accidental build failures the change converts a number of
NXP LPC32xx specific image targets to be conditionally dependent on
target build configuration. The wrapped image targets always contain
a U-Boot SPL binary and the images are supposed to be directly flashed
on a NAND flash device for read access by LPC32xx NAND MLC controller.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

The explicit arch specific build symbol allows to group supported
boards, generalize common config options and it will serve as
a dependency for platform only drivers.

Two related board defconfigs are resynced after the change.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>

The PRR syscon driver is available too late for Multi DTB build
of U-Boot. Replace it with simple check whether a platform is
Gen3 or not and produce an address of the PRR.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>

Build the -u-boot variants of the device trees so they can be included
in Multi-DTB fitImage, which in turn allows us to build single U-Boot
image for multiple boards.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>

Add device tree nodes for USB2.0(EHCI) on R-Car E3 Ebisu board.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

When referring to the MSTPSR register, it contains the clock
status of SYS, RT, SECURE, and controlling SMSTPCR using this
value has the problem of being affected by the RT and SECURE
status.This patch changes the reference register to SMSTPCR.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

This patch enables the cache command, mostly for convenience of testing.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>

Tidy up unused definition related to power control of 3DG.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

GSX clock force supply code is unnecessary at U-Boot,
because GSX clock control is supported at the kernel driver.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

This code is unnecessary, because these registers are set by the
initial program loader (IPL).
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

U-Boot uses ARM generic timer, TMU0 and TMU1 are not used, remove them.
Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>