- 05 10月, 2019 3 次提交
-
-
由 Heinrich Schuchardt 提交于
*.pyc files contain compiled Python bytecode. 'make mrproper' should remove them. Removing *.pyc files helps for instance sometimes when running into an error "binman: Unknown entry type 'blob' in node '/binman/blob'". Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Michal Simek 提交于
Trivial fix. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Andrew F. Davis 提交于
The memory allocated to store the FIT image containing SYSFW and board configuration data is statically defined to the largest size expected. This was 269000 bytes but now needs to be grown to 276000 to make room for the signatures attached to the board configuration data on High Security devices. Signed-off-by: NAndrew F. Davis <afd@ti.com>
-
- 02 10月, 2019 2 次提交
-
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-x86由 Tom Rini 提交于
- Propagate acpi_rsdp_addr to x86 kernel via boot parameters
-
- 01 10月, 2019 2 次提交
-
-
由 Andy Shevchenko 提交于
This is reincarnation of the U-Boot commit 3469bf42 Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Date: Wed Jan 10 19:40:15 2018 +0200 x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters after upstream got eventually the Linux kernel commit e6e094e053af75cbc164e950814d3d084fb1e698 Author: Juergen Gross <jgross@suse.com> Date: Tue Nov 20 08:25:29 2018 +0100 x86/acpi, x86/boot: Take RSDP address from boot params if available Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Matthias Brugger 提交于
When booting through the efi stub, the memory map get's created by reading the dram bank information. Depending on the version of the RPi4 this information changes. Read the device tree to initialize the dram bank data structure. This way the kernel is able to access the whole range of available memory. Signed-off-by: NMatthias Brugger <mbrugger@suse.com>
-
- 30 9月, 2019 4 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel由 Tom Rini 提交于
First set of u-boot-atmel fixes for 2019.10 cycle: This includes only tiny cleanups on env changes related to 2019.10 new features: removal of duplicate env settings (otherwise there may be warnings in building..) and a small fix for flashes on Gardena smart gateway (requires nand bad block tables).
-
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip由 Tom Rini 提交于
- Fix efuse read data number for rk3399 - make_fit_atf.py: fix .its generation for a single atf image
-
由 Tudor Ambarus 提交于
'commit a9221f3e ("at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs")' migrated CONFIG_ENV_ macros to defconfigs but did not remove the identical redefinition of these macros in include/configs/. Since the duplicated macros have the same value as the ones in defconfigs, no "redefined" warnings were raised. Remove duplicated macros for all sama5 and sam9x5ek boards. While verifying that the removal of the macros from include/configs did not change the same macros in defconfigs, overwrite the old defconfig by saving them with the output from "make arch=ARM savedefconfig". This resulted in the movement of some macros in the defconfig files. Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
-
由 Stefan Roese 提交于
This patch enables the BBT in NAND on the AT91SAM based GARDENA smart Gateway. This is especially important, since the Linux driver also enables this option and uses the BBT table pages. Without setting this option, U-Boot will try to re-use these pages again (e.g. UBI). Signed-off-by: NStefan Roese <sr@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com>
-
- 28 9月, 2019 2 次提交
-
-
由 Heiko Stuebner 提交于
The commit 619f002d ("rockchip: make_fit_atf.py: fix loadables property set error") fixed the double-loading of the primary atf-image, but didn't take into account that there may be rare atf images with only that main section present. Right now this will result in a broken its due to the loadables section not getting closed correctly, so fix that by adapting the guards around the loop. The guards now protect against 0 segments when the bl31 binary doesn't contain any section and 1 segment when only a core atf section is present. Fixes: 619f002d ("rockchip: make_fit_atf.py: fix loadables property set error") Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
由 Heiko Stuebner 提交于
Originally the cpuid var the value gets read into was defined as u8 cpuid[RK3399_CPUID_LEN]; hence the sizeof(cpuid) would return the correct the correct number of array elements. With the move to a separate function cpuid becomes a pointer and sizeof(cpuid) hence returns the pointer size - 8 in the arm64 case. We do have the actual id length available as function param so use it for actual amount of bytes to read. Fixes: 04825384 ("rockchip: rk3399: derive ethaddr from cpuid") Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
-
- 27 9月, 2019 1 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-efi由 Tom Rini 提交于
Pull request for UEFI sub-system for v2019.10-rc5 Bug fixes for the SetVariable() boot service.
-
- 25 9月, 2019 4 次提交
-
-
由 Pierre-Jean Texier 提交于
This commit add envtools suppport to CI to verify if there is no build issues. Signed-off-by: NPierre-Jean Texier <pjtexier@koncepto.io> Acked-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Pierre-Jean Texier 提交于
Since commit af95f206 ("env: Create a new file for environment functions"), a new header file exists. So, this commit add a missing header file. Fixes: include/env.h:158:1: error: unknown type name ‘ulong’; did you mean ‘long’? ulong env_get_ulong(const char *name, int base, ulong default_val); ^~~~~ long include/env.h:158:49: error: unknown type name ‘ulong’; did you mean ‘long’? ulong env_get_ulong(const char *name, int base, ulong default_val); Signed-off-by: NPierre-Jean Texier <pjtexier@koncepto.io> Tested-by: NJoris Offouga <offougajoris@gmail.com> Tested-by: NHeiko Schocher <hs@denx.de> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Pierre-Jean Texier 提交于
The following error appears: tools/env/fw_env.c:1149:25: error: lvalue required as unary ‘&’ operand rc = write(fd, &ENV_REDUND_OBSOLETE, sizeof(ENV_REDUND_OBSOLETE)); Fixes: d3716dd6 ("env: Rename the redundancy flags") Signed-off-by: NPierre-Jean Texier <pjtexier@koncepto.io> Tested-by: NJoris Offouga <offougajoris@gmail.com> Tested-by: NHeiko Schocher <hs@denx.de> Suggested-by: NHeiko Schocher <hs@denx.de> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Pierre-Jean Texier 提交于
Since commit d3716dd6 ("env: Rename the redundancy flags"), the definitions of ENV_REDUND_OBSOLETE & ENV_REDUND_ACTIVE was moved to env.h. Fixes: tools/env/fw_env.c:122:22: error: ‘ENV_REDUND_ACTIVE’ redeclared as different kind of symbol static unsigned char ENV_REDUND_ACTIVE = 1; ^~~~~~~~~~~~~~~~~ In file included from tools/env/fw_env.c:13: include/env.h:63:2: note: previous definition of ‘ENV_REDUND_ACTIVE’ was here ENV_REDUND_ACTIVE = 1, ^~~~~~~~~~~~~~~~~ tools/env/fw_env.c:127:22: error: ‘ENV_REDUND_OBSOLETE’ redeclared as different kind of symbol static unsigned char ENV_REDUND_OBSOLETE; ^~~~~~~~~~~~~~~~~~~ In file included from tools/env/fw_env.c:13: include/env.h:62:2: note: previous definition of ‘ENV_REDUND_OBSOLETE’ was here ENV_REDUND_OBSOLETE = 0, Signed-off-by: NPierre-Jean Texier <pjtexier@koncepto.io> Tested-by: NJoris Offouga <offougajoris@gmail.com> Tested-by: NHeiko Schocher <hs@denx.de> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 24 9月, 2019 4 次提交
-
-
由 Heinrich Schuchardt 提交于
APPEND_WRITE with data length zero is allowable according to the UEFI specification. The EDK2 interpretation of no access attributes is attributes = 0. As the UEFI specification is vague in this respect let's stick to EDK2 here. Fixes: commit 6d2f27c5 ("efi_loader: variable: support APPEND_WRITE") Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
We always have to return via EFI_EXIT() from EFIAPI functions. Coverity reported an unreachable line and a resource leak. Fixes: commit 6d2f27c5 ("efi_loader: variable: support APPEND_WRITE") Reported-by: Coverity Scan CID 253575, CID 184095 Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Remove outdated TODO for efi_stri_coll(). efi_stri_coll() is already using the Unicode capitalization table. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 9月, 2019 2 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-video.git由 Tom Rini 提交于
- fix sunxi LCD clock divider - fix splash logo with DM_VIDEO and CONFIG_VIDEO_LOGO - fix splash banner output with DM_VIDEO
-
- 21 9月, 2019 16 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-efi由 Tom Rini 提交于
Pull request for UEFI sub-system for v2019.10-rc4 (5) This patch set fixes errors in the UEFI sub-system and adds a function to compare u16 strings which is prerequisite for further patches.
-
由 Mark Kettenis 提交于
Currently we may end up with an LCD clock divider that differs from the HDMI PHY clock divider if we can't exactly match the pixel clock. Fix this by using DIV_ROUND_UP to calculate the divider. This works since the PLL is chosen such that the resulting pixel clock is never higher than the requested pixel clock. Fixes: 1feed358 ("sunxi: video: HDMI: Fix clock setup") Signed-off-by: NMark Kettenis <kettenis@openbsd.org>
-
由 Anatolij Gustschin 提交于
Old splash code in cfb_console driver displayed U-Boot version string by default. Restore this behaviour for DM_VIDEO enabled configurations. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Reported-by: NFabio Estevam <festevam@gmail.com>
-
由 Anatolij Gustschin 提交于
Enable BMP code. Also configure white on black for video console. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Define "splashimage" variable in the default environment to enable splash screen drawing. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Define "splashimage" variable in the default environment and enable BMP code. Also configure white on black for video console. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Define "splashimage" variable in the default environment to enable splash screen drawing. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
After mxc_ipuv3 DM_VIDEO conversion showing splash image doesn't work. Fix this. Also enable white on black console configuration as it used to be with cfb_console driver. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Reported-by: NFabio Estevam <festevam@gmail.com> Tested-by: NFabio Estevam <festevam@gmail.com>
-
由 Anatolij Gustschin 提交于
After mxc_ipuv3 DM_VIDEO conversion showing splash image doesn't work. Fix this. Also enable white on black console configuration as it used to be with cfb_console driver. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
After mxc_ipuv3 DM_VIDEO conversion board configs with enabled CONFIG_VIDEO_LOGO do not show splash screen (previosly drawing splash screen worked via cfb_console driver with CONFIG_VIDEO_LOGO enabled). Use splash_source library for loading splash images when CONFIG_SPLASH_SOURCE is selected, otherwise prepare built-in video logo for drawing. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip由 Tom Rini 提交于
- Fix rk3288 tinker and evb SPL boot fail - Enable get sn from cpuid for rk3399 rockpro64 board
-
由 AKASHI Takahiro 提交于
New seven test cases for u16_str<n>cmp() are added under Unicode unit test, which should be executed by "ut unicode" command. Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 AKASHI Takahiro 提交于
u16 version of strcmp(): u16_strncmp() works like u16_strcmp() but only at most n characters (in u16) are compared. This function will be used in my UEFI secure boot patch. Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 AKASHI Takahiro 提交于
Now that APPEND_WRITE is supported, the result check for the only existing test case should be changed to 'todo' to 'error', while two more test cases are added. Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 AKASHI Takahiro 提交于
If EFI_VARIABLE_APPEND_WRITE is specified in attributes at efi_set_variable(), specified data will be appended to the variable's original value. Attributes other than APPEND_WRITE should not be modified. With this patch, APPEND_WRITE test in 'variables' selftest will pass. Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
-
由 Heinrich Schuchardt 提交于
DisconnectController() should never return EFI_NOT_FOUND. If EFI_DRIVER_BINDING_PROTOCOL.Stop() fails, return EFI_DEVICE_ERROR. If the driver handle does not expose the EFI_DRIVER_BINDING_PROTOCOL return EFI_INVALID_PARAMETER. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-