- 06 7月, 2010 1 次提交
-
-
由 Steve Sakoman 提交于
This patch adds minimum support for OMAP4. Code which can be shared between OMAP3 and OMAP4 is placed in arch/arm/cpu/armv7/omap-common Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSteve Sakoman <steve@sakoman.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 30 6月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
Update CHANGELOG Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 28 6月, 2010 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
SH fails building on the target. This supports this. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 24 6月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 23 6月, 2010 1 次提交
-
-
由 Ilya Yanok 提交于
Ensure that date is called only with LC_ALL=C locale set to make dates locale neutral thus preventing lurking of non-ASCII characters into U-Boot binary. Signed-off-by: NIlya Yanok <yanok@emcraft.com> Changed LANG= into LC_ALL= as suggested by Mike Frysinger <vapier@gentoo.org> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 17 6月, 2010 1 次提交
-
-
由 Albert Aribaud 提交于
This patch adds support for the LaCie ED Mini V2 product which is based on the Marvell Orion5x SoC. Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>
-
- 15 6月, 2010 1 次提交
-
-
由 Minkyu Kang 提交于
This patch adds support for the Samsung Goni board (S5PC110 SoC) Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 14 6月, 2010 4 次提交
-
-
由 Wolfgang Denk 提交于
Instead of adding explicit build rules for each and every board to the top level Makefile (which makes it grow and grow), we now provide a simple default rule and extend the "mkconfig" script to read board configurations from a plain text file (table), "boards.cfg". For simple boards it is now sufficient to add a single line of text to the "boards.cfg" file, no changes to the top level Makefile are needed any more. To make the table better readable, change the notation for unused fields from "NULL" into "-". Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Mike Frysinger <vapier@gentoo.org>
-
由 Wolfgang Denk 提交于
Many boards don't need any special handling in the Makefile. Try and provide as generic make rules for these as possible. There are still many areas where this does not work out really well, but the changes show the direction we should take, and point out which boards or architectures need further cleanup. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Instead of stripping the "_config" part from the make target names in each call of the "mkconfig" script let this script strip the string. This prepares the ground for forther simplification of the top level Makefile. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: NWolfgang Denk <wd@denx.de> Acked-by: NDetlev Zundel <dzu@denx.de> Tested-by: NThomas Chou <thomas@wytron.com.tw>
-
- 13 6月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 11 6月, 2010 2 次提交
-
-
由 Sudhakar Rajashekhara 提交于
Provides initial support for TI OMAP-L138/DA850 SoC devices on a Logic PD EVM board. Provides: Initial boot and configuration. Support for i2c. UART support (console). Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: NBen Gardiner <bengardiner@nanometrics.ca> Reviewed-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Sudhakar Rajashekhara 提交于
DA850/OMAP-L138 is a new SoC from Texas Instruments (http://focus.ti.com/docs/prod/folders/print/omap-l138.html). This SoC is similar to DA830/OMAP-L137 in many aspects. Hence rename the da830 specific files and folders to da8xx to accommodate DA850/OMAP-L138. Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: NBen Gardiner <bengardiner@nanometrics.ca> Reviewed-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 08 6月, 2010 4 次提交
-
-
由 Vaibhav Hiremath 提交于
This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NSanjeev Premi <premi@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Cyril Chemparathy 提交于
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This patch adds support for the TNETV107X EVM board. Signed-off-by: NCyril Chemparathy <cyril@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Vaibhav Hiremath 提交于
This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NSanjeev Premi <premi@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Cyril Chemparathy 提交于
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This patch adds support for the TNETV107X EVM board. Signed-off-by: NCyril Chemparathy <cyril@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 06 6月, 2010 1 次提交
-
-
由 Asen Dimov 提交于
Add the new board PM9G45 from Ronetix GmbH. * AT91SAM9G45 MCU at 400Mhz. * 128MB DDR2 SDRAM * 256MB NAND * 10/100 MBits Ethernet DP83848 * Serial number chip DS2401 The board is made as SODIMM200 module. For more info www.ronatix.at or info@ronetix.at. Signed-off-by: NAsen Dimov <dimov@ronetix.at>
-
- 28 5月, 2010 1 次提交
-
-
由 Thomas Chou 提交于
The nios-32 arch is obsolete and broken. So it is removed. Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
- 27 5月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 16 5月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 07 5月, 2010 1 次提交
-
-
由 Kumar Gala 提交于
When we changed ARCH from ppc to powerpc we need to treat HOSTARCH the same way. We use HOSTARCH == ARCH to determine if a build is native. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 30 4月, 2010 2 次提交
-
-
由 Siddarth Gore 提交于
GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: NSiddarth Gore <gores@marvell.com>
-
由 Heiko Schocher 提交于
This patch adds support for the magnesium board from projectiondesign. This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND flash, FEC ethernet controller integrated into i.MX27. As this port is based on the imx27lite port, common config options are collected in include/configs/imx27lite-common.h Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 29 4月, 2010 1 次提交
-
-
由 Stefan Roese 提交于
This patch adds support for the Mosaix Technologies, Inc. ICON board, based on the AppliedMicro (AMCC) PPC440SPe. It's equipped with an SODIMM (512MB standard) and 64MByte of NOR FLASH. Support for the onboard SM502 will be added later. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 25 4月, 2010 2 次提交
-
-
由 Thomas Chou 提交于
This is a generic approach to port u-boot for nios2 boards. You may find the usage of this approach on the nioswiki, http://nioswiki.com/DasUBoot A fpga parameter file, which contains base address information and drivers declaration, is generated from Altera's hardware system description sopc file using tools. The example fpga parameter file is compatible with EP1C20, EP1S10 and EP1S40 boards. So these boards can be removed after this commit. Though epcs controller is removed to cut the dependency of altera_spi driver. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Signed-off-by: NScott McNutt <smcnutt@psyent.com>
-
由 Anatolij Gustschin 提交于
PDM360NG is a MPC5121E based board by ifm ecomatic gmbh. Signed-off-by: NMichael Weiss <michael.weiss@ifm.com> Signed-off-by: NDetlev Zundel <dzu@denx.de> Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
- 22 4月, 2010 1 次提交
-
-
由 Stefan Roese 提交于
As discussed on the list, move "arch/ppc" to "arch/powerpc" to better match the Linux directory structure. Please note that this patch also changes the "ppc" target in MAKEALL to "powerpc" to match this new infrastructure. But "ppc" is kept as an alias for now, to not break compatibility with scripts using this name. Signed-off-by: NStefan Roese <sr@denx.de> Acked-by: NWolfgang Denk <wd@denx.de> Acked-by: NDetlev Zundel <dzu@denx.de> Acked-by: NKim Phillips <kim.phillips@freescale.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Anatolij Gustschin <agust@denx.de>
-
- 13 4月, 2010 7 次提交
-
-
由 Peter Tyser 提交于
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
Move the libfdt directory into the common lib/ directory to clean up the top-level directory. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
Now that the other architecture-specific lib directories have been moved out of the top-level directory there's not much reason to have the '_generic' suffix on the common lib directory. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk This change is intended to clean up the top-level directory structure and more closely mimic Linux's directory organization. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
The CPUDIR variable points to the location of a target's CPU directory. Currently, it is set to cpu/$CPU. However, using $CPUDIR will allow for more flexibility in the future. It lays the groundwork for reorganizing U-Boot's directory structure to support a layout such as: arch/$ARCH/cpu/$CPU/* (architecture with multiple CPU types) arch/$ARCH/cpu/* (architecture with one CPU type) Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
- 10 4月, 2010 1 次提交
-
-
由 Andre Schwarz 提交于
Signed-off-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>
-
- 07 4月, 2010 1 次提交
-
-
由 Brent Kandetzki 提交于
A low cost 4 port IP-PBX board. Signed-off-by: NBrent Kandetzki <BrentK@teleco.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 01 4月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 28 3月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
Update CHANGELOG Signed-off-by: NWolfgang Denk <wd@denx.de>
-