This patch extends OMAP3 support for AM/DM37xx and
introduces the AM3703-based Quipos Cairo board.
Signed-off-by: NAlbert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Remove duplicate command names in usage messages to fix issues such as:
  => help yls
  yls - yaffs ls

  Usage:
  yls yls [-l] dirname
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

For some cases it is necessary to modify temporaly the bootcommand.
This can be done by writing into the Scratchregister a specific value:

* 0xCC - modify bootcmd "run netboot"
* 0xCD - modify bootcmd "run netscript"
* 0xCE - modify bootcmd "run mmcboot"

the environment in flash is NOT overwritten.
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

vxWorks needs several parameters which are set by the bootloader und his
environment. So we form a vxWorks bootline and pass the result to vxWorks on
a predefined address.
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

Due to several changes in the boot-process we do a complete redesign of the
default environment.
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

For series testing purpose we need to boot some linux, therefore we enable
the needed features

- bootz
- devicetree
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

The board has been redesigned, therefore we need from now other I/O Pins to
mux and handle.

Older boards aren't supported from now anymore.
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

remove unnary '#define	ETHLED_ORANGE	(96+16)	/* GPIO3_16 */'
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

Due to several changes of the boot-process we've redesigned the default-
environment settings completly.
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

Customer wants to display some logo very quickly after power on, so we support
from now loading a compressed bmp.gz to the screen.
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

time measurement of u-boot commands is needed very often during development.
We add this feature until development is completed. Maybe forever :)
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

It is often necessary to "break in" into boards bootloader commandline if
something fails or even for development purposes some parameters have to be
changed.

So we enable u-boot's CONFIG_NETCONSOLE feature.
We also modify Networksettings to apply with this new use-case.
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

On boards were we have no NAND-flash soldered, we want to use those free pins
as regular gpio.
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

since we have a dtb blob programmed on the board we try to setup the cpsw
interface with the programmed mac.
If this method fails, we fall back to the device-fuses.
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

a summary screen to the lcd.
Values are taken from environment and or devicetree blob.
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

Sometimes we do not want redirect u-boot's console to screen but anyway we want
write out some status information out of a u-boot script to the display.

So we cannot use the normal "echo ....", instead we write explicitly using
"lcdputs ..." for writing to the actual cursor position on LCD.
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

Sometimes we do not want redirect u-boot's console to screen but anyway we want
write out some status information out of a u-boot script to the display.

To define the specific position of the string to be written, we have to set
the cursor with "setcurs" before writing.
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

Often on boards exists a circuit which switches power on/off to LCD display.
Due to the need of limiting the in-rush current the output voltage from this
circuit rises "slowly", so it is necessary to wait a bit (VCC ramp up time)
before starting output on LCD-pins.
This time is specified in <n> ms within the panel-settings, called "pup_delay"

Further some LCDs need a couple of frames to stabilize the image on it.
We have now the possibility to wait some time after starting output on LCD.
This time is also specified in <n> ms within panel-settings, called "pon_delay"
Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at>

Without this change the board support for these SPEAr boards would
be dropped soon. Generic board support seems to work just fine.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vipin Kumar <vk.vipin@gmail.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>

- DMA threshold mode can be selected in board config head file.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>

Board can define its own AXI burst length to improve DWMAC DMA performance.

v2-changes:
- Avoid write burst len register when the Macro is not defined.

v3-changes:
- Add axi_bus register member to struct eth_dma_regs.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Bring checkstack.pl up to date from its upstream Linux development.
Effectively, the following linux commits:

208ad00 checkstack.pl: port to AArch64
fda9f99 scripts/checkstack.pl: automatically handle 32-bit and 64-bit mode for ARCH=x86
7eb6e34 kbuild: trivial - remove trailing empty lines
690998b scripts/checkstack.pl: Add metag support
Reported-by: NYork Sun <yorksun@freescale.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Currently, an environment variable must be used to store the randomly
generated UUID for each partition. This is not necessary, so make storing
the UUID optional. Now passing uuid_disk and uuid are optional when random
UUIDs are enabled.
Signed-off-by: NRob Herring <robh@kernel.org>
Acked-by: NPrzemyslaw Marczak <p.marczak@samsung.com>

The gpt command always reports success even if writing the partition table
failed. Propagate the return value of gpt_restore so we get proper status
reported.
Signed-off-by: NRob Herring <robh@kernel.org>
Reviewed-by: NPrzemyslaw Marczak <p.marczak@samsung.com>

enable generic board support for the ipam390 board.
Signed-off-by: NHeiko Schocher <hs@denx.de>

- adapt to build with eldk-5.4
- add more targets for building with buildman:
  - freescale -x arm,m68k,aarch64
  - arm1136
  - arm1176
  - arm720t
  - arm920t
  - davinci
  - kirkwood
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NRoger Meier <r.meier@siemens.com>

According to table 2-3 on page 87 of Marvell's latest PXA270
Specification Update Rev. I from 2010.04.19 [1] there exists a breed of
chips with a new CPU ID for PXA270M A1 stepping which our latest
Colibri PXA270 V2.4A modules actually have assembled. This patch helps
in correctly identifying those chips upon boot as well which then looks
as follows:

CPU: Marvell PXA27xM rev. A1

[1] http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdfAcked-by: NMarek Vasut <marex@denx.de>

Fix the name appearing in menuconfig for memtest command
Signed-off-by: NNikolaos Pasaloukos <Nikolaos.Pasaloukos@imgtec.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com

Boards need to select CONFIG_SYS_GENERIC_BOARD in order to
prevent removal from the project.
Signed-off-by: NStefano Babic <sbabic@denx.de>

Boards need to select CONFIG_SYS_GENERIC_BOARD in order to
prevent removal from the project.
Signed-off-by: NStefano Babic <sbabic@denx.de>

Boards need to select CONFIG_SYS_GENERIC_BOARD in order to
prevent removal from the project.
Signed-off-by: NStefano Babic <sbabic@denx.de>

In 0200020b we added a number of tests for 'if
defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6)' and
accidentally did one as 'ifdef defined...'
Signed-off-by: NTom Rini <trini@konsulko.com>

commit d9f43c8f sets
get_reset_cause() as static, but this conflicts with mx5
where its prototype is in sys_proto.h.

Drop it from sys_proto.h and drop print_cpuinfo from mx53_loco,
factorizing the call for this board.
Signed-off-by: NStefano Babic <sbabic@denx.de>
CC: Jason Liu <jason.hui@linaro.org>

Currently in some cases SDRAM init requires global_data to be available
and soon this will not be available prior to board_init_f().  Adjust the
code paths in these cases to be correct.  In some cases we had the SPL
stack be in DDR as we might have large stacks (due to Falcon Mode +
Environment).  In these cases switch to CONFIG_SPL_STACK_R.  In other
cases we had simply been setting CONFIG_SPL_STACK into SRAM.  In these
cases we no longer need to (CONFIG_SYS_INIT_SP_ADDR is used and is also
in SRAM) so drop those lines.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Tested on Beagleboard, Beagleboard xM
Tested-by: NMatt Porter <mporter@konsulko.com>
Tested on Beaglebone Black, AM43xx GP EVM, OMAP5 uEVM, OMAP4 Pandaboard
Tested-by: NTom Rini <trini@konsulko.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>