Adds sound and codec device node parameters
Signed-off-by: NR. Chandrasekar <rcsekar@samsung.com>
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Add sound device node data for exynos
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

This patch initialises I2C using FDT.
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Acked-by: NHeiko Schocher <hs@denx.de>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Functions added to get the I2C bus number and reset I2C bus using
FDT node.
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Acked-by: NHeiko Schocher <hs@denx.de>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Api is added to decode peripheral id based on the interrupt number
of the peripheral.
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Add required compatible information for I2C driver.
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Acked-by: NHeiko Schocher <hs@denx.de>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

This patch adds aliases for I2C.
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Acked-by: NHeiko Schocher <hs@denx.de>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Add I2C device node data for exynos
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

This patch add pinmux settings for Exynos4 for mmc0 and mmc2
Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
CC: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Support for a new command (defined at envs) - spl_export generates
the ATAGS image necessary for fast boot. Afterwards, it is stored
at ext4 partition.

Generated image format:
CRC [4B] SIZE [4B] PAYLOAD(ATAGS/DT) [SIZE]

Remarks:
- CRC is calculated only for PAYLOAD
- SIZE is the size of PAYLOAD

It is important to adjust ${splsize} when large image is generated.
It is defined as hex, since ext4 related commands expect it.

The ${spladdr} environment variable corresponds to
CONFIG_SYS_SPL_ARGS_ADDR

Additionally definitions for DFU have been refactored and support for
EFI has been added as well.
Signed-off-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Adds functions to extract clock frequency of Exynos4x12 IPs.
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Add the configuration file for exynos5250 based SMDK5250 board.
Signed-off-by: NHatim Ali <hatim.rv@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Create a common configuration file for all exynos5250 based boards.
Going forward we will be using DT based driver discovery for all the boards
based on Exynos5. The different boards added will have there own config.h files
which internally will include this file and specify their specific DT files.
Signed-off-by: NHatim Ali <hatim.rv@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Add device tree based ethernet driver for SMC911X controller on
SMDK5250 boards.
Signed-off-by: NHatim Ali <hatim.rv@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Add the compatibility string and constant for the ethernet driver
so the device tree parsing code can recognize it.
Signed-off-by: NHatim Ali <hatim.rv@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

This patch adds initial dts file for EXYNOS5250 SoC. This dts
file currently include only ethernet devices and properties. More
devices to be added in subsequent patches.
Also add the dts file for SMDK5250 board which uses the EXYNOS5250
dts file.
Signed-off-by: NHatim Ali <hatim.rv@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

This patch adds gpio structure for Exynos4x12.
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

This patch adds clock structure for Exynos4x12.
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

This patch populates base addresses of Exynos4x12 registers.
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

This commit merges branches from samsung, imx and tegra
meant to fix merge issues between u-boot/master and
u-boot-arm/master, as well as a few manual merge fixes.

Conflicts:
	README
	arch/arm/cpu/armv7/exynos/clock.c
	board/samsung/universal_c210/universal.c
	drivers/misc/Makefile
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/seaboard.h

SH7752 has two fast ethernet controllers and two gigabit ethernet
controllers. It is similar to SH7757.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

The ip is stored in network order, so we can't test it in host order.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
Reviewed-by: NKim Phillips <kim.phillips@freescale.com>

This prints a tftp speed indication after the download completes. This
is the 3.6 MiB/s indicator below.

Tegra2 (SeaBoard) # tftp ...
Using asx0 device
TFTP from server 172.22.72.144; our IP address is 172.22.73.81
Filename '/tftpboot/uImage-user-seaboard-1'.
Load address: 0x408000
Loading: #################################################
         3.6 MiB/s
done
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>

CONFIG_SYS_TFTP_LOADADDR is defined on severals boards,
but it's never used. So we can safely removed it.
Signed-off-by: NPhilippe Reynes <tremyfr@yahoo.fr>

Marvell 88E1118R has different uid then 88E1118.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
CC: Andy Fleming <afleming@freescale.com>
CC: Zang Roy-R61911 <tie-fei.zang@freescale.com>
CC: Kumar Gala <galak@kernel.crashing.org>

In e1000e driver, Rx descriptor queue is used such that hardware can add only
one descriptor at a time. So the WTHRESH granularity in RXDCTL should be set
to single descriptor. This would ensure that every time controller fills a Rx
descriptor, it is flushed to host memory. Earlier this granularity was in
cache line units i.e 2 descriptors. This leads to controller always waiting
for 2 descriptors before flushing them out. But since not more than one Rx BD
is actually available , the accumulation condition never gets hit.
Signed-off-by: NRuchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: NVakul Garg <vakul@freescale.com>
Acked-by: NRoy Zang <tie-fei.zang@freescale.com>

- since commit 418396e2 nand write.raw
can take the number of page to be written as an argument. nand_update_full
is passing the size (in bytes) to nand write.raw. This value was previously
ignored but now breaks the write.
- this patch updates the default environment of these boards to provide a
pagecount instead of a size to nand write.raw.
- tested on a mx28evk with a 4k page NAND and on a custom board with a
2k page NAND.
Signed-off-by: NEric Bénard <eric@eukrea.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: NMarek Vasut <marex@denx.de>

Signed-off-by: NTom Rini <trini@ti.com>

The #ifdef here is not enough to stop part_efi.c from being built, only
being unused.  And with recent changes this now leads to warnings.  The
easiest solution here is to just let the garbage collection at link time
do its job.
Signed-off-by: NTom Rini <trini@ti.com>

Use the variable access flags to implement the protection for ethaddr
and serial# instead of hard-coding them.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Implement a way to delete more than one variable at a time.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Now that we have support for permissions, add a way to override them.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Add support for read-only, write-once, and change-default.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Similar to the env callback command, this will show details about the
options available, the static list, and the currently active variables.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Currently just validates variable types as decimal, hexidecimal,
boolean, ip address, and mac address.  Call
env_acl_validate_setenv_params() from setenv() in fw_env.c.

If the entry is not found in the env .flags, then look in the static
one. This allows the env to override the static definitions, but prevents
the need to have every definition in the environment distracting you.

Need to build in _ctype for isdigit for Linux.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

Currently just validates variable types as decimal, hexidecimal,
boolean, ip address, and mac address.

If the entry is not found in the env ".flags", then look in the static
one. This allows the env to override the static definitions, but prevents
the need to have every definition in the environment distracting you.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>