This seems like a better name. This is a patch-up to the earlier commit
63b4b5ba, and also removes a redundant Makefile change.
Signed-off-by: NSimon Glass <sjg@chromium.org>

The original code did not cover every case and there was a missing negative
sign in one case. Expand the coverage and fix the bug.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This type is more readily available on the host compiler, so use it instead.
Signed-off-by: NSimon Glass <sjg@chromium.org>

We don't make use of the device tree otherwise yet (and will need to
think how to not break the current multi-board support) and this causes
further breakage with additional changes.
Signed-off-by: NTom Rini <trini@ti.com>

Commit 7d89982b stopped creating symbolic link
arch/${arch}/include/asm/proc.

arch/.gitignore should be updated.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Vasili Galka <vvv444@gmail.com>

ext4fs_allocate_blocks() always allocates at least one block for a file.
If the file size is zero, this causes total_remaining_blocks to
underflow, which then causes an apparent hang while 2^32 blocks are
allocated.

To solve this, check that total_remaining_blocks is non-zero as part of
the loop condition (i.e. before each loop) rather than at the end of
the loop.
Signed-off-by: NStephen Warren <swarren@nvidia.com>

Before this commit, fdt_initrd() just returned if initrd
start address is zero.
But it is possible if the RAM is located at address 0.

This commit makes the return condition more reasonable:
Just return if the size of initrd is zero.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Data written to DTB must be converted to big endian order.
It is usually done by using cpu_to_fdt32(), cpu_to_fdt64(), etc.

fdt_initrd() invoked write_cell(), which always swaps byte order.
It means the function only worked on little endian architectures.
(On big endian architectures, the byte order should be kept as it is)

This commit uses cpu_to_fdt32() and cpu_to_fdt64()
and deletes write_cell().
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Data written to DTB must be converted to big endian order.
It is usually done by using cpu_to_fdt32(), cpu_to_fdt64(), etc.

fdt_fixup_memory_banks() invoked write_cell(), which always
swaps byte order.
It means the function only worked on little endian architectures.

This commit adds and uses a new helper function, fdt_pack_reg(),
which works on both big endian and little endian architrectures.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

In the next commit, I will add a new function, fdt_pack_reg()
which uses get_cells_len().

Beforehand, this commit adds 'const' qualifier to get_cells_len().
Otherwise, a warning message will appear:
 warning: passing argument 1 of 'get_cells_len' discards 'const'
 qualifier from pointer target type [enabled by default]
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

- Do not use a deep indentation. We have only 80-character
   on each line and 1 indentation consumes 8 spaces. Before the
   code moves far to the right, you should consider to
   fix your code. See Linux Documentation/CodingStyle.

 - Add CONFIG_OF_STDOUT_VIA_ALIAS and OF_STDOUT_PATH macros
   only to their definition. Do not add them to both
   callee and caller. This is a tip to avoid using #ifdef
   everywhere.

 - OF_STDOUT_PATH and CONFIG_OF_STDOUT_VIA_ALIAS are exclusive.
   If both are defined, the former takes precedence.
   Do not try to fix-up "linux,stdout-path" property twice.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

After all, we have realized "force" argument is completely
useless. fdt_chosen() was always called with force = 1.

We should always want to do the same thing
(set appropriate value to the property)
even if the property already exists.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

After all, we have realized "force" argument is completely
useless. fdt_initrd() was always called with force = 1.

We should always want to do the same thing
(set appropriate value to the property)
even if the property already exists.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Some functions in fdt_support.c do the same routine:
search a node with a given name ("chosen", "memory", etc.)
or newly create it if it does not exist.

So this commit makes that routine to a helper function.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

gd->bd is not used in fdt_support.c.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Fix the following warning messages:

In function 'flash_erase': 180:21:
warning: variable 'last' set but not used [-Wunused-but-set-variable]
In function 'write_buff':  322:10:
warning: variable 'port_width' set but not used [-Wunused-but-set-variable]
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

It has been observed that fit_check_format() will fail when passed a
corrupt FIT image.  This was tracked down to _fdt_string_eq():
return (strlen(p) == len) && (memcmp(p, s, len) == 0);

In the case of a corrupt FIT image one can't depend on 'p' being NULL
terminated.  I changed it to use strnlen() to fix the issue.
Signed-off-by: NTom Rini <trini@ti.com>

M68k is big endian cpu ,so use be_out and be_in in big endian.
Signed-off-by: NChao Fu <b44548@freescale.com>

Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

A board that has a USB ethernet device only may set the usbetheraddr
and not the ethaddr.
ethaddr will be the default MAC address that is chosen and if that
is not populated then the usbethaddr is looked at.  If neither are set
then then device tree blob is not modified.
Signed-off-by: NDan Murphy <dmurphy@ti.com>

From comparison of current logic and the logic that was prior to commit
aba27acf, we see that first parameter of FPGA_GET_REG() shall be the
FPGA index and not channel number. The re-factoring in commit aba27acf
accidentally changed that.

Cc: Stefan Roese <sr@denx.de>
Acked-by: NDirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: NVasili Galka <vvv444@gmail.com>

This is a MIME GnuPG-signed message.  If you see this text, it means that
your E-mail or Usenet software does not support MIME signed messages.
The Internet standard for MIME PGP messages, RFC 2015, was published in 1996.
To open this message correctly you will need to install E-mail or Usenet
software that supports modern Internet standards.

Revert changes in iocon.h config file caused by
these two commits:
"configs: iocom: Fix typo on CMD_FPGA command"
(sha1: d0db28f9)
and
"fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK"
(sha1: 64e809af)

CONFIG_CMD_FPGAD is own command.
Reported-by: NDirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Cleanup to balance malloc/free calls.
Signed-off-by: NDarwin Rambo <drambo@broadcom.com>
Reviewed-by: NSteve Rae <srae@broadcom.com>
Acked-by: NPantelis Antoniou <panto@antoniou-consulting.com>

Currently, U-Boot behaves as follows:

- Begin with no SD card inserted in "mmc 1"
- Execute: mmc dev 1
- This fails, since there is no card
- User plugs in an SD card
- Execute: mmc dev 1
- This still fails, since the HW isn't reprobed.

With this change, U-Boot behaves as follows:

- Begin with no SD card inserted in "mmc 1"
- Execute: mmc dev 1
- This fails, since there is no card
- User plugs in an SD card
- Execute: mmc dev 1
- The newly present SD card is detected

I know that "mmc rescan" will force the HW to be reprobed, but I feel it
makes more sense if "mmc dev" always reprobes the HW after selecting the
current MMC device. This allows scripts to just execute "mmc dev", and
not have to also execute "mmc rescan" to check for media presense.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NPantelis Antoniou <panto@antoniou-consulting.com>

The body of init_mmc_device() is now identical to that of do_mmc_rescan()
except for the error codes returned. Modify do_mmc_rescan() to simply
call init_mmc_device() and convert the error codes, to avoid code
duplication.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NPantelis Antoniou <panto@antoniou-consulting.com>

This allows callers to inject mmc->has_init = 0 between finding the
MMC device, and calling mmc_init(), which forces mmc_init() to rescan
the HW. Future changes will use this feature.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NJaehoon Chung <jh80.chung@samsung.com>
Acked-by: NPantelis Antoniou <panto@antoniou-consulting.com>

Currently, get_device()/get_dev_hwpart() for MMC devices does not select
an explicit HW partition unless the user explicitly requests one, i.e. by
requesting device "mmc 0.0" rather than just "mmc 0". I think it makes
more sense if the default is to select HW partition 0 (main data area)
if the user didn't request a specific partition. Otherwise, the following
happens, which feels wrong:

Select HW partition 1 (boot0):
mmc dev 0 1

Attempts to access SW partition 1 on HW partition 1 (boot0), rather than
SW partition 1 on HW partition 0 (main data area):
ls mmc 0:1 /

With this patch, the second command above re-selects the main data area.

Many device types don't support HW partitions at all, so if HW partition
0 is selected (either explicitly or as the default) and there's no
select_hwpart function, we simply skip attempting to select a HW
partition.

Some MMC devices (i.e. SD cards) don't support HW partitions. However,
this patch still works, since mmc_start_init() sets the current
partition number to 0, and mmc_select_hwpart() succeeds if the requested
partition is already selected.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NPantelis Antoniou <panto@antoniou-consulting.com>

Currently, "mmc dev 0" does not change the selected HW partition. I
think it makes more sense if "mmc dev 0" is an alias for "mmc dev 0 0",
i.e. that HW partition 0 (main data area) is always selected by default
if the user didn't request a specific partition. Otherwise, the following
happens, which feels wrong:

Select HW partition 1 (boot0):
mmc dev 0 1

Doesn't change the HW partition, so it's still 1 (boot0):
mmc dev 0

With this patch, the second command above re-selects the main data area.

Note that some MMC devices (i.e. SD cards) don't support HW partitions.
However, this patch still works, since mmc_start_init() sets the current
partition number to 0, and mmc_select_hwpart() succeeds if the requested
partition is already selected.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NPantelis Antoniou <panto@antoniou-consulting.com>

Rather than just returning -1 everywhere, try to return something
meaningful from mmc_select_hwpart(). Note that most other MMC functions
don't do this, including functions called from mmc_select_hwpart(), so
I'm not sure how effective this will be. Still, it's one less place with
hard-coded -1.
Suggested-by: NPantelis Antoniou <panto@antoniou-consulting.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NPantelis Antoniou <panto@antoniou-consulting.com>

- "i2c mw" command hangs (with some compilers)
Signed-off-by: NSteve Rae <srae@broadcom.com>

To prevent a warning for clang the loop without a body
is made more clear by moving it to a line of its own.
This prevents a clang warning.

cc: sbabic@denx.de
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Clang interpretes an if condition like  "if ((a = b) == NULL)
as it tries to assign a value in a statement. Hence if you do
"if ((something)) it warns you that you might be confused.
Hence drop the double braces for plane if statements.
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Clang interpretes an if condition like  "if ((a = b) == NULL)
as it tries to assign a value in a statement. Hence if you do
"if ((something)) it warns you that you might be confused.
Hence drop the double braces for plane if statements.

cc: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Clang interpretes an if condition like  "if ((a = b) == NULL)
as it tries to assign a value in a statement. Hence if you do
"if ((something)) it warns you that you might be confused.
Hence drop the double braces for plane if statements.

Simon Glass <sjg@chromium.org>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

It seems the code tries to trick the compiler the argument
is actually used. However compilers became too smart to
fool them so easily an now warn. Gcc and clang don't seem
to emit a warning when the argument is unused. If so it
should be decorated with unused / (void).
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

cc: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

this prevent some warnings when compiling with clang

cc: Stelian Pop <stelian@popies.net>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

cc: Simon Glass <sjg@chromium.org>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
Acked-by: NSimon Glass <sjg@chromium.org>

mkconfig links ${objtree}/include/asm/proc/ to
${srctree}/arch/${arch}/include/asm/proc-armv/. This seems to be a
remnant from the past. Ever since its introduction in 2003 it is used
only in ARM build and always links to same place, so let's simplify
the code, remove it and reference directly where needed.

Successful MAKEALL for ARM and PowerPC verified on Linux.
Signed-off-by: NVasili Galka <vvv444@gmail.com>